[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <f90ff4e2710aa329174e3d5f55c43270d31e3389.camel@mediatek.com>
Date: Thu, 27 Feb 2025 03:45:44 +0000
From: CK Hu (胡俊光) <ck.hu@...iatek.com>
To: AngeloGioacchino Del Regno <angelogioacchino.delregno@...labora.com>,
"chunkuang.hu@...nel.org" <chunkuang.hu@...nel.org>
CC: "robh@...nel.org" <robh@...nel.org>, "jie.qiu@...iatek.com"
<jie.qiu@...iatek.com>, "tzimmermann@...e.de" <tzimmermann@...e.de>,
"simona@...ll.ch" <simona@...ll.ch>, "mripard@...nel.org"
<mripard@...nel.org>, Jitao Shi (石记涛)
<jitao.shi@...iatek.com>, "linux-mediatek@...ts.infradead.org"
<linux-mediatek@...ts.infradead.org>, "dri-devel@...ts.freedesktop.org"
<dri-devel@...ts.freedesktop.org>, "maarten.lankhorst@...ux.intel.com"
<maarten.lankhorst@...ux.intel.com>, "linux-kernel@...r.kernel.org"
<linux-kernel@...r.kernel.org>, "devicetree@...r.kernel.org"
<devicetree@...r.kernel.org>, "kernel@...labora.com" <kernel@...labora.com>,
"dmitry.baryshkov@...aro.org" <dmitry.baryshkov@...aro.org>,
"krzk+dt@...nel.org" <krzk+dt@...nel.org>,
Lewis Liao (廖柏鈞) <Lewis.Liao@...iatek.com>,
"p.zabel@...gutronix.de" <p.zabel@...gutronix.de>, "conor+dt@...nel.org"
<conor+dt@...nel.org>, TommyYL Chen (陳彥良)
<TommyYL.Chen@...iatek.com>, Ives Chenjh (陳俊弘)
<Ives.Chenjh@...iatek.com>, "airlied@...il.com" <airlied@...il.com>,
"linux-arm-kernel@...ts.infradead.org"
<linux-arm-kernel@...ts.infradead.org>, "matthias.bgg@...il.com"
<matthias.bgg@...il.com>, Jason-JH Lin (林睿祥)
<Jason-JH.Lin@...iatek.com>, "junzhi.zhao@...iatek.com"
<junzhi.zhao@...iatek.com>
Subject: Re: [PATCH v7 07/43] drm/mediatek: mtk_dpi: Add support for DPI input
clock from HDMI
On Mon, 2025-02-17 at 16:48 +0100, AngeloGioacchino Del Regno wrote:
> External email : Please do not click links or open attachments until you have verified the sender or the content.
>
>
> On some SoCs, like MT8195 and MT8188, the DPI instance that is
> reserved to the HDMI Transmitter uses a different clock topology.
>
> In this case, the DPI is clocked by the HDMI IP, and this outputs
> its clock to the MM input of dpi_pixel_clk, which is essential to
> enable register access to the DPI IP.
>
> Add a `clocked_by_hdmi` member to struct mtk_dpi_conf, and check
> it to avoid enabling the DPI clocks in the mediatek-drm internal
> .start() callback (and avoid disabing in the .stop() component
> callback): this will make sure that the clock configuration
> sequence is respected during display pipeline setup by following
> the bridge ops between DPI and HDMI, where the HDMI driver is
> expected to enable the clocks in the bridge's pre_enable(), and
> DPI in the enable() cb.
Reviewed-by: CK Hu <ck.hu@...iatek.com>
>
> Signed-off-by: AngeloGioacchino Del Regno <angelogioacchino.delregno@...labora.com>
> ---
> drivers/gpu/drm/mediatek/mtk_dpi.c | 13 ++++++++++---
> 1 file changed, 10 insertions(+), 3 deletions(-)
>
> diff --git a/drivers/gpu/drm/mediatek/mtk_dpi.c b/drivers/gpu/drm/mediatek/mtk_dpi.c
> index 9a6c0f75f764..9f83e82437dd 100644
> --- a/drivers/gpu/drm/mediatek/mtk_dpi.c
> +++ b/drivers/gpu/drm/mediatek/mtk_dpi.c
> @@ -145,6 +145,8 @@ struct mtk_dpi_factor {
> If present, implies that the feature must be enabled.
> * @pixels_per_iter: Quantity of transferred pixels per iteration.
> * @edge_cfg_in_mmsys: If the edge configuration for DPI's output needs to be set in MMSYS.
> + * @clocked_by_hdmi: HDMI IP outputs clock to dpi_pixel_clk input clock, needed
> + * for DPI registers access.
> */
> struct mtk_dpi_conf {
> const struct mtk_dpi_factor *dpi_factor;
> @@ -165,6 +167,7 @@ struct mtk_dpi_conf {
> u32 input_2p_en_bit;
> u32 pixels_per_iter;
> bool edge_cfg_in_mmsys;
> + bool clocked_by_hdmi;
> };
>
> static void mtk_dpi_mask(struct mtk_dpi *dpi, u32 offset, u32 val, u32 mask)
> @@ -585,7 +588,9 @@ static int mtk_dpi_set_display_mode(struct mtk_dpi *dpi,
> struct videomode vm = { 0 };
>
> drm_display_mode_to_videomode(mode, &vm);
> - mtk_dpi_set_pixel_clk(dpi, &vm, mode->clock);
> +
> + if (!dpi->conf->clocked_by_hdmi)
> + mtk_dpi_set_pixel_clk(dpi, &vm, mode->clock);
>
> dpi_pol.ck_pol = MTK_DPI_POLARITY_FALLING;
> dpi_pol.de_pol = MTK_DPI_POLARITY_RISING;
> @@ -920,14 +925,16 @@ void mtk_dpi_start(struct device *dev)
> {
> struct mtk_dpi *dpi = dev_get_drvdata(dev);
>
> - mtk_dpi_power_on(dpi);
> + if (!dpi->conf->clocked_by_hdmi)
> + mtk_dpi_power_on(dpi);
> }
>
> void mtk_dpi_stop(struct device *dev)
> {
> struct mtk_dpi *dpi = dev_get_drvdata(dev);
>
> - mtk_dpi_power_off(dpi);
> + if (!dpi->conf->clocked_by_hdmi)
> + mtk_dpi_power_off(dpi);
> }
>
> unsigned int mtk_dpi_encoder_index(struct device *dev)
> --
> 2.48.1
>
Powered by blists - more mailing lists