[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <56fcpdrg6lonf7trasxurwpoausfv4lahtlggab7vcsxmxrnwz@jseugb2oidwt>
Date: Fri, 28 Feb 2025 06:36:25 +0200
From: Dmitry Baryshkov <dmitry.baryshkov@...aro.org>
To: Jun Nie <jun.nie@...aro.org>
Cc: Rob Clark <robdclark@...il.com>,
Abhinav Kumar <quic_abhinavk@...cinc.com>, Sean Paul <sean@...rly.run>,
Marijn Suijten <marijn.suijten@...ainline.org>, David Airlie <airlied@...il.com>,
Simona Vetter <simona@...ll.ch>, Jessica Zhang <quic_jesszhan@...cinc.com>,
linux-arm-msm@...r.kernel.org, dri-devel@...ts.freedesktop.org, freedreno@...ts.freedesktop.org,
linux-kernel@...r.kernel.org
Subject: Re: [PATCH v7 12/15] drm/msm/dpu: blend pipes per mixer pairs config
On Wed, Feb 26, 2025 at 08:31:01PM +0800, Jun Nie wrote:
> Currently, only 2 pipes are used at most for a plane. A stage structure
> describes the configuration for a mixer pair. So only one stage is needed
> for current usage cases. The quad-pipe case will be added in future and 2
> stages are used in the case. So extend the stage to an array with array
> size STAGES_PER_PLANE and blend pipes per mixer pair with configuration
> in the stage structure.
>
> Signed-off-by: Jun Nie <jun.nie@...aro.org>
> ---
> drivers/gpu/drm/msm/disp/dpu1/dpu_crtc.c | 45 +++++++++++++++++++----------
> drivers/gpu/drm/msm/disp/dpu1/dpu_hw_mdss.h | 3 +-
> 2 files changed, 31 insertions(+), 17 deletions(-)
>
> @@ -463,15 +463,24 @@ static void _dpu_crtc_blend_setup_mixer(struct drm_crtc *crtc,
> if (pstate->stage == DPU_STAGE_BASE && format->alpha_enable)
> bg_alpha_enable = true;
>
> - for (i = 0; i < PIPES_PER_PLANE; i++) {
> - if (!pstate->pipe[i].sspp)
> - continue;
> - set_bit(pstate->pipe[i].sspp->idx, fetch_active);
> - _dpu_crtc_blend_setup_pipe(crtc, plane,
> - mixer, cstate->num_mixers,
> - pstate->stage,
> - format, fb ? fb->modifier : 0,
> - &pstate->pipe[i], i, stage_cfg);
> + /* loop pipe per mixer pair with config in stage structure */
> + for (stage = 0; stage < STAGES_PER_PLANE; stage++) {
> + head_pipe_in_stage = stage * PIPES_PER_STAGE;
> + for (i = 0; i < PIPES_PER_STAGE; i++) {
> + pipe_idx = i + head_pipe_in_stage;
> + if (!pstate->pipe[pipe_idx].sspp)
> + continue;
empty line
> + lms_in_pair = min(cstate->num_mixers - (stage * PIPES_PER_STAGE),
> + PIPES_PER_STAGE);
> + set_bit(pstate->pipe[pipe_idx].sspp->idx, fetch_active);
> + _dpu_crtc_blend_setup_pipe(crtc, plane,
> + &mixer[head_pipe_in_stage],
> + lms_in_pair,
> + pstate->stage,
> + format, fb ? fb->modifier : 0,
> + &pstate->pipe[pipe_idx], i,
> + &stage_cfg[stage]);
> + }
> }
>
> /* blend config update */
[...]
> diff --git a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_mdss.h b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_mdss.h
> index 5f010d36672cc6440c69779908b315aab285eaf0..74bf3ab9d6cfb8152b32d89a6c66e4d92d5cee1d 100644
> --- a/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_mdss.h
> +++ b/drivers/gpu/drm/msm/disp/dpu1/dpu_hw_mdss.h
> @@ -34,8 +34,9 @@
> #define DPU_MAX_PLANES 4
> #endif
>
> -#define PIPES_PER_PLANE 2
> +#define STAGES_PER_PLANE 1
> #define PIPES_PER_STAGE 2
> +#define PIPES_PER_PLANE (PIPES_PER_STAGE * STAGES_PER_PLANE)
PLease move this to the previous patch.
With that fixed:
Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@...aro.org>
> #ifndef DPU_MAX_DE_CURVES
> #define DPU_MAX_DE_CURVES 3
> #endif
>
> --
> 2.34.1
>
--
With best wishes
Dmitry
Powered by blists - more mailing lists