| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20250228101817.865811-3-w.egorov@phytec.de>
Date: Fri, 28 Feb 2025 11:18:15 +0100
From: Wadim Egorov <w.egorov@...tec.de>
To: <nm@...com>, <vigneshr@...com>, <kristo@...nel.org>, <robh@...nel.org>,
<krzk+dt@...nel.org>, <conor+dt@...nel.org>
CC: <linux-arm-kernel@...ts.infradead.org>, <devicetree@...r.kernel.org>,
<linux-kernel@...r.kernel.org>, <upstream@...ts.phytec.de>
Subject: [PATCH 3/5] arm64: dts: ti: k3-am642-phyboard-electra: Add boot phase tags
The bootph-all and bootph-pre-ram tags were introduced in dt-schema
(dtschema/schemas/bootph.yaml) to define node usage across different
boot phases.
Add boot phase tags to all required nodes to ensure boot support from
all sources, including UART, Ethernet, uSD card, eMMC, and OSPI NOR Flash.
Signed-off-by: Wadim Egorov <w.egorov@...tec.de>
---
arch/arm64/boot/dts/ti/k3-am64-phycore-som.dtsi | 12 ++++++++++++
.../boot/dts/ti/k3-am642-phyboard-electra-rdk.dts | 5 +++++
2 files changed, 17 insertions(+)
diff --git a/arch/arm64/boot/dts/ti/k3-am64-phycore-som.dtsi b/arch/arm64/boot/dts/ti/k3-am64-phycore-som.dtsi
index 99a6fdfaa7fb..52d53b690ac9 100644
--- a/arch/arm64/boot/dts/ti/k3-am64-phycore-som.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am64-phycore-som.dtsi
@@ -27,6 +27,7 @@ aliases {
memory@...00000 {
device_type = "memory";
reg = <0x00000000 0x80000000 0x00000000 0x80000000>;
+ bootph-all;
};
reserved_memory: reserved-memory {
@@ -132,6 +133,7 @@ AM64X_IOPAD(0x01f8, PIN_INPUT, 4) /* (P5) PRG0_PRU1_GPO18.MDIO0_MDIO */
AM64X_IOPAD(0x01fc, PIN_OUTPUT, 4) /* (R2) PRG0_PRU1_GPO19.MDIO0_MDC */
AM64X_IOPAD(0x0100, PIN_OUTPUT, 7) /* (V7) PRG1_PRU0_GPO18.GPIO0_63 */
>;
+ bootph-all;
};
cpsw_rgmii1_pins_default: cpsw-rgmii1-default-pins {
@@ -150,6 +152,7 @@ AM64X_IOPAD(0x01f4, PIN_INPUT, 4) /* (V5) PRG0_PRU1_GPO17.RGMII1_RD3 */
AM64X_IOPAD(0x014c, PIN_OUTPUT, 4) /* (AA14) PRG1_PRU1_GPO17.RGMII1_TD3 */
AM64X_IOPAD(0x0154, PIN_INPUT, 7) /* (V12) PRG1_PRU1_GPO19.GPIO0_84 */
>;
+ bootph-all;
};
eeprom_wp_pins_default: eeprom-wp-default-pins {
@@ -169,6 +172,7 @@ main_i2c0_pins_default: main-i2c0-default-pins {
AM64X_IOPAD(0x0260, PIN_INPUT, 0) /* (A18) I2C0_SCL */
AM64X_IOPAD(0x0264, PIN_INPUT, 0) /* (B18) I2C0_SDA */
>;
+ bootph-all;
};
ospi0_pins_default: ospi0-default-pins {
@@ -185,6 +189,7 @@ AM64X_IOPAD(0x0024, PIN_INPUT, 0) /* (N18) OSPI0_D6 */
AM64X_IOPAD(0x0028, PIN_INPUT, 0) /* (M17) OSPI0_D7 */
AM64X_IOPAD(0x002c, PIN_OUTPUT, 0) /* (L19) OSPI0_CSn0 */
>;
+ bootph-all;
};
rtc_pins_default: rtc-defaults-pins {
@@ -197,6 +202,7 @@ AM64X_IOPAD(0x0278, PIN_INPUT, 7) /* (C19) EXTINTn.GPIO1_70 */
&cpsw3g {
pinctrl-names = "default";
pinctrl-0 = <&cpsw_rgmii1_pins_default>;
+ bootph-all;
status = "okay";
};
@@ -204,6 +210,7 @@ &cpsw3g_mdio {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&cpsw_mdio_pins_default>;
+ bootph-all;
cpsw3g_phy1: ethernet-phy@1 {
compatible = "ethernet-phy-id2000.a231", "ethernet-phy-ieee802.3-c22";
@@ -215,12 +222,14 @@ cpsw3g_phy1: ethernet-phy@1 {
reset-gpios = <&main_gpio0 63 GPIO_ACTIVE_LOW>;
reset-assert-us = <1000>;
reset-deassert-us = <1000>;
+ bootph-all;
};
};
&cpsw_port1 {
phy-mode = "rgmii-rxid";
phy-handle = <&cpsw3g_phy1>;
+ bootph-all;
status = "okay";
};
@@ -266,6 +275,7 @@ &main_i2c0 {
pinctrl-names = "default";
pinctrl-0 = <&main_i2c0_pins_default>;
clock-frequency = <400000>;
+ bootph-all;
eeprom@50 {
compatible = "atmel,24c32";
@@ -377,6 +387,7 @@ serial_flash: flash@0 {
cdns,tchsh-ns = <60>;
cdns,tslch-ns = <60>;
cdns,read-delay = <0>;
+ bootph-all;
};
};
@@ -386,6 +397,7 @@ &sdhci0 {
ti,driver-strength-ohm = <50>;
disable-wp;
keep-power-in-suspend;
+ bootph-all;
};
&tscadc0 {
diff --git a/arch/arm64/boot/dts/ti/k3-am642-phyboard-electra-rdk.dts b/arch/arm64/boot/dts/ti/k3-am642-phyboard-electra-rdk.dts
index bc8e1ce11047..6fbd8d932396 100644
--- a/arch/arm64/boot/dts/ti/k3-am642-phyboard-electra-rdk.dts
+++ b/arch/arm64/boot/dts/ti/k3-am642-phyboard-electra-rdk.dts
@@ -171,6 +171,7 @@ vcc_3v3_mmc: regulator-sd {
regulator-max-microvolt = <3300000>;
regulator-boot-on;
regulator-always-on;
+ bootph-all;
};
};
@@ -275,6 +276,7 @@ AM64X_IOPAD(0x0290, PIN_INPUT, 0) /* MMC1_CLKLB */
AM64X_IOPAD(0x0294, PIN_INPUT_PULLUP, 0) /* (J19) MMC1_CMD */
AM64X_IOPAD(0x0298, PIN_INPUT_PULLUP, 0) /* (D19) MMC1_SDCD */
>;
+ bootph-all;
};
main_spi0_pins_default: main-spi0-default-pins {
@@ -291,6 +293,7 @@ main_uart0_pins_default: main-uart0-default-pins {
AM64X_IOPAD(0x0230, PIN_INPUT, 0) /* (D15) UART0_RXD */
AM64X_IOPAD(0x0234, PIN_OUTPUT, 0) /* (C16) UART0_TXD */
>;
+ bootph-all;
};
main_uart1_pins_default: main-uart1-default-pins {
@@ -413,6 +416,7 @@ &main_uart0 {
status = "okay";
pinctrl-names = "default";
pinctrl-0 = <&main_uart0_pins_default>;
+ bootph-all;
};
&main_uart1 {
@@ -429,6 +433,7 @@ &sdhci1 {
pinctrl-0 = <&main_mmc1_pins_default>;
disable-wp;
no-1-8-v;
+ bootph-all;
};
&serdes0 {
--
2.34.1
Powered by blists - more mailing lists