linux-kernel - [PATCH 4/5] arm64: dts: ti: k3-am642-phyboard-electra: Reorder properties per DTS coding style

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite for Android: free password hash cracker in your pocket

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-ID: <20250228101817.865811-4-w.egorov@phytec.de>
Date: Fri, 28 Feb 2025 11:18:16 +0100
From: Wadim Egorov <w.egorov@...tec.de>
To: <nm@...com>, <vigneshr@...com>, <kristo@...nel.org>, <robh@...nel.org>,
	<krzk+dt@...nel.org>, <conor+dt@...nel.org>
CC: <linux-arm-kernel@...ts.infradead.org>, <devicetree@...r.kernel.org>,
	<linux-kernel@...r.kernel.org>, <upstream@...ts.phytec.de>
Subject: [PATCH 4/5] arm64: dts: ti: k3-am642-phyboard-electra: Reorder properties per DTS coding style

Reorder properties to comply with the DeviceTree coding style guidelines:
https://docs.kernel.org/devicetree/bindings/dts-coding-style.html

Signed-off-by: Wadim Egorov <w.egorov@...tec.de>
---
 arch/arm64/boot/dts/ti/k3-am64-phycore-som.dtsi    | 12 ++++++------
 .../boot/dts/ti/k3-am642-phyboard-electra-rdk.dts  | 14 +++++++-------
 2 files changed, 13 insertions(+), 13 deletions(-)

diff --git a/arch/arm64/boot/dts/ti/k3-am64-phycore-som.dtsi b/arch/arm64/boot/dts/ti/k3-am64-phycore-som.dtsi
index 52d53b690ac9..4697c395fcb9 100644
--- a/arch/arm64/boot/dts/ti/k3-am64-phycore-som.dtsi
+++ b/arch/arm64/boot/dts/ti/k3-am64-phycore-som.dtsi
@@ -207,22 +207,22 @@ &cpsw3g {
 };
 
 &cpsw3g_mdio {
-	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&cpsw_mdio_pins_default>;
 	bootph-all;
+	status = "okay";
 
 	cpsw3g_phy1: ethernet-phy@1 {
 		compatible = "ethernet-phy-id2000.a231", "ethernet-phy-ieee802.3-c22";
 		reg = <1>;
 		interrupt-parent = <&main_gpio0>;
 		interrupts = <84 IRQ_TYPE_EDGE_FALLING>;
-		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
-		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
 		reset-gpios = <&main_gpio0 63 GPIO_ACTIVE_LOW>;
 		reset-assert-us = <1000>;
 		reset-deassert-us = <1000>;
 		bootph-all;
+		ti,rx-internal-delay = <DP83867_RGMIIDCTL_2_00_NS>;
+		ti,fifo-depth = <DP83867_PHYCR_FIFO_DEPTH_4_B_NIB>;
 	};
 };
 
@@ -271,11 +271,11 @@ mbox_m4_0: mbox-m4-0 {
 };
 
 &main_i2c0 {
-	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_i2c0_pins_default>;
 	clock-frequency = <400000>;
 	bootph-all;
+	status = "okay";
 
 	eeprom@50 {
 		compatible = "atmel,24c32";
@@ -372,9 +372,9 @@ &mcu_m4fss {
 };
 
 &ospi0 {
-	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&ospi0_pins_default>;
+	status = "okay";
 
 	serial_flash: flash@0 {
 		compatible = "jedec,spi-nor";
@@ -392,12 +392,12 @@ serial_flash: flash@0 {
 };
 
 &sdhci0 {
-	status = "okay";
 	non-removable;
 	ti,driver-strength-ohm = <50>;
 	disable-wp;
 	keep-power-in-suspend;
 	bootph-all;
+	status = "okay";
 };
 
 &tscadc0 {
diff --git a/arch/arm64/boot/dts/ti/k3-am642-phyboard-electra-rdk.dts b/arch/arm64/boot/dts/ti/k3-am642-phyboard-electra-rdk.dts
index 6fbd8d932396..f63c101b7d61 100644
--- a/arch/arm64/boot/dts/ti/k3-am642-phyboard-electra-rdk.dts
+++ b/arch/arm64/boot/dts/ti/k3-am642-phyboard-electra-rdk.dts
@@ -352,10 +352,10 @@ &i2c_som_rtc {
 };
 
 &main_i2c1 {
-	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_i2c1_pins_default>;
 	clock-frequency = <400000>;
+	status = "okay";
 
 	eeprom@51 {
 		compatible = "atmel,24c02";
@@ -385,25 +385,25 @@ led-5 {
 };
 
 &main_mcan0 {
-	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_mcan0_pins_default>;
 	phys = <&can_tc1>;
+	status = "okay";
 };
 
 &main_mcan1 {
-	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_mcan1_pins_default>;
 	phys = <&can_tc2>;
+	status = "okay";
 };
 
 &main_spi0 {
-	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_spi0_pins_default>;
 	cs-gpios = <0>, <&main_gpio1 43 GPIO_ACTIVE_LOW>;
 	ti,pindir-d0-out-d1-in;
+	status = "okay";
 
 	tpm@1 {
 		compatible = "infineon,slb9670", "tcg,tpm_tis-spi";
@@ -413,27 +413,27 @@ tpm@1 {
 };
 
 &main_uart0 {
-	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_uart0_pins_default>;
 	bootph-all;
+	status = "okay";
 };
 
 &main_uart1 {
-	status = "okay";
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_uart1_pins_default>;
 	uart-has-rtscts;
+	status = "okay";
 };
 
 &sdhci1 {
-	status = "okay";
 	vmmc-supply = <&vcc_3v3_mmc>;
 	pinctrl-names = "default";
 	pinctrl-0 = <&main_mmc1_pins_default>;
 	disable-wp;
 	no-1-8-v;
 	bootph-all;
+	status = "okay";
 };
 
 &serdes0 {
-- 
2.34.1