| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-Id: <D87JQ69QA6F0.184YR2BTJB0IT@nvidia.com>
Date: Tue, 04 Mar 2025 23:19:49 +0900
From: "Alexandre Courbot" <acourbot@...dia.com>
To: "Danilo Krummrich" <dakr@...nel.org>, <airlied@...il.com>,
<simona@...ll.ch>, <corbet@....net>, <maarten.lankhorst@...ux.intel.com>,
<mripard@...nel.org>, <tzimmermann@...e.de>, <ajanulgu@...hat.com>,
<lyude@...hat.com>, <pstanner@...hat.com>, <zhiw@...dia.com>,
<cjia@...dia.com>, <jhubbard@...dia.com>, <bskeggs@...dia.com>,
<acurrid@...dia.com>
Cc: <ojeda@...nel.org>, <alex.gaynor@...il.com>, <boqun.feng@...il.com>,
<gary@...yguo.net>, <bjorn3_gh@...tonmail.com>, <benno.lossin@...ton.me>,
<a.hindborg@...nel.org>, <aliceryhl@...gle.com>, <tmgross@...ch.edu>,
<mcgrof@...nel.org>, <russ.weight@...ux.dev>,
<dri-devel@...ts.freedesktop.org>, <linux-doc@...r.kernel.org>,
<linux-kernel@...r.kernel.org>, <nouveau@...ts.freedesktop.org>,
<rust-for-linux@...r.kernel.org>, "Nouveau"
<nouveau-bounces@...ts.freedesktop.org>
Subject: Re: [PATCH v4 5/6] gpu: nova-core: add initial driver stub
Hi Danilo,
On Thu Feb 27, 2025 at 2:55 AM JST, Danilo Krummrich wrote:
> Add the initial nova-core driver stub.
>
> nova-core is intended to serve as a common base for nova-drm (the
> corresponding DRM driver) and the vGPU manager VFIO driver, serving as a
> hard- and firmware abstraction layer for GSP-based NVIDIA GPUs.
>
> The Nova project, including nova-core and nova-drm, in the long term,
> is intended to serve as the successor of Nouveau for all GSP-based GPUs.
>
> The motivation for both, starting a successor project for Nouveau and
> doing so using the Rust programming language, is documented in detail
> through a previous post on the mailing list [1], an LWN article [2] and a
> talk from LPC '24.
>
> In order to avoid the chicken and egg problem to require a user to
> upstream Rust abstractions, but at the same time require the Rust
> abstractions to implement the driver, nova-core kicks off as a driver
> stub and is subsequently developed upstream.
>
> Link: https://lore.kernel.org/dri-devel/Zfsj0_tb-0-tNrJy@cassiopeiae/T/#u [1]
> Link: https://lwn.net/Articles/990736/ [2]
> Link: https://youtu.be/3Igmx28B3BQ?si=sBdSEer4tAPKGpOs [3]
> Signed-off-by: Danilo Krummrich <dakr@...nel.org>
> ---
> MAINTAINERS | 10 ++
> drivers/gpu/Makefile | 1 +
> drivers/gpu/nova-core/Kconfig | 14 ++
> drivers/gpu/nova-core/Makefile | 3 +
> drivers/gpu/nova-core/driver.rs | 47 ++++++
> drivers/gpu/nova-core/firmware.rs | 45 ++++++
> drivers/gpu/nova-core/gpu.rs | 225 +++++++++++++++++++++++++++++
> drivers/gpu/nova-core/nova_core.rs | 19 +++
> drivers/gpu/nova-core/regs.rs | 55 +++++++
> drivers/video/Kconfig | 1 +
> 10 files changed, 420 insertions(+)
> create mode 100644 drivers/gpu/nova-core/Kconfig
> create mode 100644 drivers/gpu/nova-core/Makefile
> create mode 100644 drivers/gpu/nova-core/driver.rs
> create mode 100644 drivers/gpu/nova-core/firmware.rs
> create mode 100644 drivers/gpu/nova-core/gpu.rs
> create mode 100644 drivers/gpu/nova-core/nova_core.rs
> create mode 100644 drivers/gpu/nova-core/regs.rs
>
> diff --git a/MAINTAINERS b/MAINTAINERS
> index 1b0cc181db74..3c8a3b61af38 100644
> --- a/MAINTAINERS
> +++ b/MAINTAINERS
> @@ -7438,6 +7438,16 @@ T: git https://gitlab.freedesktop.org/drm/nouveau.git
> F: drivers/gpu/drm/nouveau/
> F: include/uapi/drm/nouveau_drm.h
>
> +CORE DRIVER FOR NVIDIA GPUS [RUST]
> +M: Danilo Krummrich <dakr@...nel.org>
> +L: nouveau@...ts.freedesktop.org
> +S: Supported
> +Q: https://patchwork.freedesktop.org/project/nouveau/
> +B: https://gitlab.freedesktop.org/drm/nova/-/issues
> +C: irc://irc.oftc.net/nouveau
> +T: git https://gitlab.freedesktop.org/drm/nova.git nova-next
> +F: drivers/gpu/nova-core/
> +
> DRM DRIVER FOR OLIMEX LCD-OLINUXINO PANELS
> M: Stefan Mavrodiev <stefan@...mex.com>
> S: Maintained
> diff --git a/drivers/gpu/Makefile b/drivers/gpu/Makefile
> index 8997f0096545..36a54d456630 100644
> --- a/drivers/gpu/Makefile
> +++ b/drivers/gpu/Makefile
> @@ -5,3 +5,4 @@
> obj-y += host1x/ drm/ vga/
> obj-$(CONFIG_IMX_IPUV3_CORE) += ipu-v3/
> obj-$(CONFIG_TRACE_GPU_MEM) += trace/
> +obj-$(CONFIG_NOVA_CORE) += nova-core/
> diff --git a/drivers/gpu/nova-core/Kconfig b/drivers/gpu/nova-core/Kconfig
> new file mode 100644
> index 000000000000..ad0c06756516
> --- /dev/null
> +++ b/drivers/gpu/nova-core/Kconfig
> @@ -0,0 +1,14 @@
> +config NOVA_CORE
> + tristate "Nova Core GPU driver"
> + depends on PCI
> + depends on RUST
> + depends on RUST_FW_LOADER_ABSTRACTIONS
> + default n
> + help
> + Choose this if you want to build the Nova Core driver for Nvidia
> + GPUs based on the GPU System Processor (GSP). This is true for Turing
> + and later GPUs.
> +
> + This driver is work in progress and may not be functional.
> +
> + If M is selected, the module will be called nova_core.
> diff --git a/drivers/gpu/nova-core/Makefile b/drivers/gpu/nova-core/Makefile
> new file mode 100644
> index 000000000000..2d78c50126e1
> --- /dev/null
> +++ b/drivers/gpu/nova-core/Makefile
> @@ -0,0 +1,3 @@
> +# SPDX-License-Identifier: GPL-2.0
> +
> +obj-$(CONFIG_NOVA_CORE) += nova_core.o
> diff --git a/drivers/gpu/nova-core/driver.rs b/drivers/gpu/nova-core/driver.rs
> new file mode 100644
> index 000000000000..63c19f140fbd
> --- /dev/null
> +++ b/drivers/gpu/nova-core/driver.rs
> @@ -0,0 +1,47 @@
> +// SPDX-License-Identifier: GPL-2.0
> +
> +use kernel::{bindings, c_str, pci, prelude::*};
> +
> +use crate::gpu::Gpu;
> +
> +#[pin_data]
> +pub(crate) struct NovaCore {
> + #[pin]
> + pub(crate) gpu: Gpu,
> +}
> +
> +const BAR0_SIZE: usize = 8;
> +pub(crate) type Bar0 = pci::Bar<BAR0_SIZE>;
> +
> +kernel::pci_device_table!(
> + PCI_TABLE,
> + MODULE_PCI_TABLE,
> + <NovaCore as pci::Driver>::IdInfo,
> + [(
> + pci::DeviceId::from_id(bindings::PCI_VENDOR_ID_NVIDIA, bindings::PCI_ANY_ID as _),
> + ()
> + )]
> +);
> +
> +impl pci::Driver for NovaCore {
> + type IdInfo = ();
> + const ID_TABLE: pci::IdTable<Self::IdInfo> = &PCI_TABLE;
> +
> + fn probe(pdev: &mut pci::Device, _info: &Self::IdInfo) -> Result<Pin<KBox<Self>>> {
> + dev_dbg!(pdev.as_ref(), "Probe Nova Core GPU driver.\n");
> +
> + pdev.enable_device_mem()?;
> + pdev.set_master();
> +
> + let bar = pdev.iomap_region_sized::<BAR0_SIZE>(0, c_str!("nova-core/bar0"))?;
> +
> + let this = KBox::pin_init(
> + try_pin_init!(Self {
> + gpu <- Gpu::new(pdev, bar)?,
> + }),
> + GFP_KERNEL,
> + )?;
> +
> + Ok(this)
> + }
> +}
> diff --git a/drivers/gpu/nova-core/firmware.rs b/drivers/gpu/nova-core/firmware.rs
> new file mode 100644
> index 000000000000..a94caa7cf8d3
> --- /dev/null
> +++ b/drivers/gpu/nova-core/firmware.rs
> @@ -0,0 +1,45 @@
> +// SPDX-License-Identifier: GPL-2.0
> +
> +use crate::gpu;
> +use kernel::firmware;
> +
> +pub(crate) struct ModInfoBuilder<const N: usize>(firmware::ModInfoBuilder<N>);
> +
> +impl<const N: usize> ModInfoBuilder<N> {
> + const fn make_entry_file(self, chipset: &[u8], fw: &[u8]) -> Self {
> + let version = b"535.113.01";
> +
> + ModInfoBuilder(
> + self.0
> + .prepare()
> + .push(b"nvidia/")
> + .push(chipset)
> + .push(b"/gsp/")
> + .push(fw)
> + .push(b"-")
> + .push(version)
> + .push(b".bin"),
> + )
> + }
> +
> + const fn make_entry_chipset(self, chipset: &[u8]) -> Self {
> + self.make_entry_file(chipset, b"booter_load")
> + .make_entry_file(chipset, b"booter_unload")
> + .make_entry_file(chipset, b"bootloader")
> + .make_entry_file(chipset, b"gsp")
> + }
> +
> + pub(crate) const fn create(
> + module_name: &'static kernel::str::CStr,
> + ) -> firmware::ModInfoBuilder<N> {
> + let mut this = Self(firmware::ModInfoBuilder::new(module_name));
> + let mut i = 0;
> +
> + while i < gpu::Chipset::NAMES.len() {
> + this = this.make_entry_chipset(gpu::Chipset::NAMES[i].as_bytes());
> + i += 1;
> + }
> +
> + this.0
> + }
> +}
> diff --git a/drivers/gpu/nova-core/gpu.rs b/drivers/gpu/nova-core/gpu.rs
> new file mode 100644
> index 000000000000..7693a5df0dc1
> --- /dev/null
> +++ b/drivers/gpu/nova-core/gpu.rs
> @@ -0,0 +1,225 @@
> +// SPDX-License-Identifier: GPL-2.0
> +
> +use kernel::{
> + device, devres::Devres, error::code::*, firmware, fmt, pci, prelude::*, str::BStr, str::CString,
> +};
> +
> +use crate::driver::Bar0;
> +use crate::regs;
> +use core::fmt;
> +
> +const fn to_lowercase_bytes<const N: usize>(s: &str) -> [u8; N] {
> + let src = s.as_bytes();
> + let mut dst = [0; N];
> + let mut i = 0;
> +
> + while i < src.len() && i < N {
> + dst[i] = (src[i] as char).to_ascii_lowercase() as u8;
> + i += 1;
> + }
> +
> + dst
> +}
> +
> +macro_rules! define_chipset {
> + ({ $($variant:ident = $value:expr),* $(,)* }) =>
> + {
> + /// Enum representation of the GPU chipset.
> + #[derive(fmt::Debug)]
> + pub(crate) enum Chipset {
> + $($variant = $value),*,
> + }
> +
> + impl Chipset {
> + pub(crate) const ALL: &'static [Chipset] = &[
> + $( Chipset::$variant, )*
> + ];
> +
> + pub(crate) const NAMES: [&BStr; Self::ALL.len()] = [
> + $( BStr::from_bytes(
> + to_lowercase_bytes::<{ stringify!($variant).len() }>(
> + stringify!($variant)
> + ).as_slice()
> + ), )*
> + ];
> + }
> + }
> +}
> +
> +define_chipset!({
> + // Turing
> + TU102 = 0x162,
> + TU104 = 0x164,
> + TU106 = 0x166,
> + TU117 = 0x167,
> + TU116 = 0x168,
> + // Ampere
> + GA102 = 0x172,
> + GA103 = 0x173,
> + GA104 = 0x174,
> + GA106 = 0x176,
> + GA107 = 0x177,
> + // Ada
> + AD102 = 0x192,
> + AD103 = 0x193,
> + AD104 = 0x194,
> + AD106 = 0x196,
> + AD107 = 0x197,
> +});
> +
> +impl Chipset {
> + pub(crate) fn arch(&self) -> Architecture {
> + match self {
> + Self::TU102 | Self::TU104 | Self::TU106 | Self::TU117 | Self::TU116 => {
> + Architecture::Turing
> + }
> + Self::GA102 | Self::GA103 | Self::GA104 | Self::GA106 | Self::GA107 => {
> + Architecture::Ampere
> + }
> + Self::AD102 | Self::AD103 | Self::AD104 | Self::AD106 | Self::AD107 => {
> + Architecture::Ada
> + }
> + }
> + }
> +}
> +
> +// TODO
> +//
> +// The resulting strings are used to generate firmware paths, hence the
> +// generated strings have to be stable.
> +//
> +// Hence, replace with something like strum_macros derive(Display).
> +//
> +// For now, redirect to fmt::Debug for convenience.
> +impl fmt::Display for Chipset {
> + fn fmt(&self, f: &mut fmt::Formatter<'_>) -> fmt::Result {
> + write!(f, "{:?}", self)
> + }
> +}
> +
> +// TODO replace with something like derive(FromPrimitive)
> +impl TryFrom<u32> for Chipset {
> + type Error = kernel::error::Error;
> +
> + fn try_from(value: u32) -> Result<Self, Self::Error> {
> + match value {
> + 0x162 => Ok(Chipset::TU102),
> + 0x164 => Ok(Chipset::TU104),
> + 0x166 => Ok(Chipset::TU106),
> + 0x167 => Ok(Chipset::TU117),
> + 0x168 => Ok(Chipset::TU116),
> + 0x172 => Ok(Chipset::GA102),
> + 0x173 => Ok(Chipset::GA103),
> + 0x174 => Ok(Chipset::GA104),
> + 0x176 => Ok(Chipset::GA106),
> + 0x177 => Ok(Chipset::GA107),
> + 0x192 => Ok(Chipset::AD102),
> + 0x193 => Ok(Chipset::AD103),
> + 0x194 => Ok(Chipset::AD104),
> + 0x196 => Ok(Chipset::AD106),
> + 0x197 => Ok(Chipset::AD107),
> + _ => Err(ENODEV),
> + }
> + }
> +}
I know this is probably temporary anyway, but since there is a macro now you can simplify this implementation by making part of it:
impl TryFrom<u32> for Chipset {
type Error = kernel::error::Error;
fn try_from(value: u32) -> Result<Self, Self::Error> {
match value {
$( $value => Ok(Chipset::$variant), )*
_ => Err(ENODEV),
}
}
}
Powered by blists - more mailing lists