lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20250304150838.23ca5qbhm4yrpa3h@thinkpad>
Date: Tue, 4 Mar 2025 20:38:38 +0530
From: Manivannan Sadhasivam <manivannan.sadhasivam@...aro.org>
To: Jim Quinlan <james.quinlan@...adcom.com>
Cc: linux-pci@...r.kernel.org, Nicolas Saenz Julienne <nsaenz@...nel.org>,
	Bjorn Helgaas <bhelgaas@...gle.com>,
	Lorenzo Pieralisi <lorenzo.pieralisi@....com>,
	Cyril Brulebois <kibi@...ian.org>,
	Stanimir Varbanov <svarbanov@...e.de>,
	bcm-kernel-feedback-list@...adcom.com, jim2101024@...il.com,
	Florian Fainelli <florian.fainelli@...adcom.com>,
	Lorenzo Pieralisi <lpieralisi@...nel.org>,
	Krzysztof Wilczyński <kw@...ux.com>,
	Rob Herring <robh@...nel.org>,
	"moderated list:BROADCOM BCM2711/BCM2835 ARM ARCHITECTURE" <linux-rpi-kernel@...ts.infradead.org>,
	"moderated list:BROADCOM BCM2711/BCM2835 ARM ARCHITECTURE" <linux-arm-kernel@...ts.infradead.org>,
	open list <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH v2 6/8] PCI: brcmstb: Use same constant table for config
 space access

On Fri, Feb 14, 2025 at 12:39:34PM -0500, Jim Quinlan wrote:
> The constants EXT_CFG_DATA and EXT_CFG_INDEX vary by SOC. One of the
> map_bus methods used these constants, the other used different constants.
> Fortunately there was no problem because the SoCs that used the latter
> map_bus method all had the same register constants.
> 
> Remove the redundant constants and adjust the code to use them.  In
> addition, update EXT_CFG_DATA to use the 4k-page based config space access
> system, which is what the second map_bus method was already using.
> 

What is the effect of this change? Why is it required? Sounds like it got
sneaked in.

> Signed-off-by: Jim Quinlan <james.quinlan@...adcom.com>
> ---
>  drivers/pci/controller/pcie-brcmstb.c | 14 ++++++--------
>  1 file changed, 6 insertions(+), 8 deletions(-)
> 
> diff --git a/drivers/pci/controller/pcie-brcmstb.c b/drivers/pci/controller/pcie-brcmstb.c
> index e1059e3365bd..923ac1a03f85 100644
> --- a/drivers/pci/controller/pcie-brcmstb.c
> +++ b/drivers/pci/controller/pcie-brcmstb.c
> @@ -150,9 +150,6 @@
>  #define  MSI_INT_MASK_SET		0x10
>  #define  MSI_INT_MASK_CLR		0x14
>  
> -#define PCIE_EXT_CFG_DATA				0x8000
> -#define PCIE_EXT_CFG_INDEX				0x9000
> -
>  #define  PCIE_RGR1_SW_INIT_1_PERST_MASK			0x1
>  #define  PCIE_RGR1_SW_INIT_1_PERST_SHIFT		0x0
>  
> @@ -727,8 +724,8 @@ static void __iomem *brcm_pcie_map_bus(struct pci_bus *bus,
>  
>  	/* For devices, write to the config space index register */
>  	idx = PCIE_ECAM_OFFSET(bus->number, devfn, 0);
> -	writel(idx, pcie->base + PCIE_EXT_CFG_INDEX);
> -	return base + PCIE_EXT_CFG_DATA + PCIE_ECAM_REG(where);
> +	writel(idx, base + IDX_ADDR(pcie));
> +	return base + DATA_ADDR(pcie) + PCIE_ECAM_REG(where);
>  }
>  
>  static void __iomem *brcm7425_pcie_map_bus(struct pci_bus *bus,
> @@ -1711,7 +1708,7 @@ static void brcm_pcie_remove(struct platform_device *pdev)
>  static const int pcie_offsets[] = {
>  	[RGR1_SW_INIT_1]	= 0x9210,
>  	[EXT_CFG_INDEX]		= 0x9000,
> -	[EXT_CFG_DATA]		= 0x9004,
> +	[EXT_CFG_DATA]		= 0x8000,
>  	[PCIE_HARD_DEBUG]	= 0x4204,
>  	[PCIE_INTR2_CPU_BASE]	= 0x4300,
>  };
> @@ -1719,7 +1716,7 @@ static const int pcie_offsets[] = {
>  static const int pcie_offsets_bcm7278[] = {
>  	[RGR1_SW_INIT_1]	= 0xc010,
>  	[EXT_CFG_INDEX]		= 0x9000,
> -	[EXT_CFG_DATA]		= 0x9004,
> +	[EXT_CFG_DATA]		= 0x8000,
>  	[PCIE_HARD_DEBUG]	= 0x4204,
>  	[PCIE_INTR2_CPU_BASE]	= 0x4300,
>  };
> @@ -1733,8 +1730,9 @@ static const int pcie_offsets_bcm7425[] = {
>  };
>  
>  static const int pcie_offsets_bcm7712[] = {
> +	[RGR1_SW_INIT_1]	= 0x9210,
>  	[EXT_CFG_INDEX]		= 0x9000,
> -	[EXT_CFG_DATA]		= 0x9004,
> +	[EXT_CFG_DATA]		= 0x8000,
>  	[PCIE_HARD_DEBUG]	= 0x4304,
>  	[PCIE_INTR2_CPU_BASE]	= 0x4400,
>  };
> -- 
> 2.43.0
> 

-- 
மணிவண்ணன் சதாசிவம்

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ