linux-kernel - Re: [PATCH 1/2] dt-bindings: reset: Document RZ/V2H(P) USB2PHY Control bindings

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [day] [month] [year] [list]

Message-ID: <CA+V-a8u4bnoirzHnjCHj=dZ9XbboSF3MfHY+3b24NXYo9c4oTQ@mail.gmail.com>
Date: Tue, 4 Mar 2025 07:33:21 +0000
From: "Lad, Prabhakar" <prabhakar.csengg@...il.com>
To: Krzysztof Kozlowski <krzk@...nel.org>
Cc: Philipp Zabel <p.zabel@...gutronix.de>, Geert Uytterhoeven <geert+renesas@...der.be>, 
	linux-kernel@...r.kernel.org, linux-renesas-soc@...r.kernel.org, 
	Biju Das <biju.das.jz@...renesas.com>, 
	Fabrizio Castro <fabrizio.castro.jz@...esas.com>, 
	Lad Prabhakar <prabhakar.mahadev-lad.rj@...renesas.com>
Subject: Re: [PATCH 1/2] dt-bindings: reset: Document RZ/V2H(P) USB2PHY
 Control bindings

Hi Krzysztof,

On Tue, Mar 4, 2025 at 6:59 AM Krzysztof Kozlowski <krzk@...nel.org> wrote:
>
> On 03/03/2025 21:12, Prabhakar wrote:
> > From: Lad Prabhakar <prabhakar.mahadev-lad.rj@...renesas.com>
> >
> > Add device tree binding document for the Renesas RZ/V2H(P) USB2PHY Control
> > Device. It mainly controls reset and power down of the USB2.0 PHY (for
> > both host and function).
> >
> > Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@...renesas.com>
> > ---
> A nit, subject: drop second/last, redundant "bindings". The
> "dt-bindings" prefix is already stating that these are bindings.
> See also:
> https://elixir.bootlin.com/linux/v6.7-rc8/source/Documentation/devicetree/bindings/submitting-patches.rst#L18
>
OK, I will drop the bindings at the end.

> <form letter>
> Please use scripts/get_maintainers.pl to get a list of necessary people
> and lists to CC. It might happen, that command when run on an older
> kernel, gives you outdated entries. Therefore please be sure you base
> your patches on recent Linux kernel.
>
> Tools like b4 or scripts/get_maintainer.pl provide you proper list of
> people, so fix your workflow. Tools might also fail if you work on some
> ancient tree (don't, instead use mainline) or work on fork of kernel
> (don't, instead use mainline). Just use b4 and everything should be
> fine, although remember about `b4 prep --auto-to-cc` if you added new
> patches to the patchset.
>
> You missed at least devicetree list (maybe more), so this won't be
> tested by automated tooling. Performing review on untested code might be
> a waste of time.
>
Ouch I missed that, as I sent out a fix to one of the reset driver and
re-used the same command. I'll resend the series. Thanks for pointing
it out.

Cheers,
Prabhakar