lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite for Android: free password hash cracker in your pocket
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <87v7sk23bg.fsf@BLaptop.bootlin.com>
Date: Fri, 07 Mar 2025 17:49:55 +0100
From: Gregory CLEMENT <gregory.clement@...tlin.com>
To: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>, Andrew Lunn
 <andrew@...n.ch>, Sebastian Hesselbarth <sebastian.hesselbarth@...il.com>,
 Rob Herring <robh@...nel.org>, Krzysztof Kozlowski <krzk+dt@...nel.org>,
 Conor Dooley <conor+dt@...nel.org>, linux-arm-kernel@...ts.infradead.org,
 devicetree@...r.kernel.org, linux-kernel@...r.kernel.org
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
Subject: Re: ***SPAM*** [PATCH 1/2] arm64: dts: marvell: armada-8040: Align
 GPIO hog name with bindings

Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org> writes:

> Bindings expect GPIO hog names to end with 'hog' suffix, so correct it
> to fix dtbs_check warning:
>
>   armada-8040-clearfog-gt-8k.dtb: sata_reset: $nodename:0: 'sata_reset' does not match '^.+-hog(-[0-9]+)?$'
>
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>


Applied on mvebu/dt64

Thanks,

Gregory

> ---
>  .../arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts | 8 ++++----
>  1 file changed, 4 insertions(+), 4 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts b/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts
> index 225a54ab688d..90ae93274a16 100644
> --- a/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts
> +++ b/arch/arm64/boot/dts/marvell/armada-8040-clearfog-gt-8k.dts
> @@ -371,25 +371,25 @@ &cp0_pcie0 {
>  };
>  
>  &cp0_gpio2 {
> -	sata_reset {
> +	sata-reset-hog {
>  		gpio-hog;
>  		gpios = <1 GPIO_ACTIVE_HIGH>;
>  		output-high;
>  	};
>  
> -	lte_reset {
> +	lte-reset-hog {
>  		gpio-hog;
>  		gpios = <2 GPIO_ACTIVE_LOW>;
>  		output-low;
>  	};
>  
> -	wlan_disable {
> +	wlan_disable-hog {
>  		gpio-hog;
>  		gpios = <19 GPIO_ACTIVE_LOW>;
>  		output-low;
>  	};
>  
> -	lte_disable {
> +	lte-disable-hog {
>  		gpio-hog;
>  		gpios = <21 GPIO_ACTIVE_LOW>;
>  		output-low;
> -- 
> 2.43.0
>

-- 
Grégory CLEMENT, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ