linux-kernel - Re: [PATCH 2/2] ARM: dts: marvell: kirkwood-openrd: Align GPIO hog name with bindings

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [day] [month] [year] [list]

Message-ID: <87seno23b5.fsf@BLaptop.bootlin.com>
Date: Fri, 07 Mar 2025 17:50:06 +0100
From: Gregory CLEMENT <gregory.clement@...tlin.com>
To: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>, Andrew Lunn
 <andrew@...n.ch>, Sebastian Hesselbarth <sebastian.hesselbarth@...il.com>,
 Rob Herring <robh@...nel.org>, Krzysztof Kozlowski <krzk+dt@...nel.org>,
 Conor Dooley <conor+dt@...nel.org>, linux-arm-kernel@...ts.infradead.org,
 devicetree@...r.kernel.org, linux-kernel@...r.kernel.org
Cc: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
Subject: Re: [PATCH 2/2] ARM: dts: marvell: kirkwood-openrd: Align GPIO hog
 name with bindings

Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org> writes:

> Bindings expect GPIO hog names to end with 'hog' suffix, so correct it
> to fix dtbs_check warning:
>
>   kirkwood-openrd-ultimate.dtb: p28: $nodename:0: 'p28' does not match '^.+-hog(-[0-9]+)?$'
>
> Signed-off-by: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>

Applied on mvebu/dt64

Thanks,

Gregory

> ---
>  arch/arm/boot/dts/marvell/kirkwood-openrd.dtsi | 4 ++--
>  1 file changed, 2 insertions(+), 2 deletions(-)
>
> diff --git a/arch/arm/boot/dts/marvell/kirkwood-openrd.dtsi b/arch/arm/boot/dts/marvell/kirkwood-openrd.dtsi
> index 47f03c69c55a..9d7cff4feada 100644
> --- a/arch/arm/boot/dts/marvell/kirkwood-openrd.dtsi
> +++ b/arch/arm/boot/dts/marvell/kirkwood-openrd.dtsi
> @@ -53,7 +53,7 @@ mvsdio@...00 {
>  			cd-gpios = <&gpio0 29 9>;
>  		};
>  		gpio@...00 {
> -			p28 {
> +			p28-hog {
>  				gpio-hog;
>  				gpios = <28 GPIO_ACTIVE_HIGH>;
>  				/*
> @@ -71,7 +71,7 @@ p28 {
>  			};
>  		};
>  		gpio@...40 {
> -			p2 {
> +			p2-hog {
>  				gpio-hog;
>  				gpios = <2 GPIO_ACTIVE_HIGH>;
>  				/*
> -- 
> 2.43.0
>

-- 
Grégory CLEMENT, Bootlin
Embedded Linux and Kernel engineering
https://bootlin.com