| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <ae3245aa713f76000dbd20b4ad6f66d30611d3b8.1742204502.git.cy_huang@richtek.com>
Date: Mon, 17 Mar 2025 18:06:21 +0800
From: <cy_huang@...htek.com>
To: Mark Brown <broonie@...nel.org>, Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>
CC: Liam Girdwood <lgirdwood@...il.com>, Rob Herring <robh@...nel.org>,
ChiYuan Huang <cy_huang@...htek.com>, <linux-kernel@...r.kernel.org>,
<devicetree@...r.kernel.org>
Subject: [PATCH 1/3] regulator: rtq2208: Fix incorrect buck converter phase mapping
From: ChiYuan Huang <cy_huang@...htek.com>
Use the hidden bank RG to get the correct buck converter phase mapping.
Fixes: 85a11f55621a ("regulator: rtq2208: Add Richtek RTQ2208 SubPMIC")
Signed-off-by: ChiYuan Huang <cy_huang@...htek.com>
---
drivers/regulator/rtq2208-regulator.c | 89 +++++++++++++++++++++------
1 file changed, 71 insertions(+), 18 deletions(-)
diff --git a/drivers/regulator/rtq2208-regulator.c b/drivers/regulator/rtq2208-regulator.c
index 5925fa7a9a06..2a2f6a54de11 100644
--- a/drivers/regulator/rtq2208-regulator.c
+++ b/drivers/regulator/rtq2208-regulator.c
@@ -27,6 +27,9 @@
#define RTQ2208_REG_LDO1_CFG 0xB1
#define RTQ2208_REG_LDO2_CFG 0xC1
#define RTQ2208_REG_LDO_DVS_CTRL 0xD0
+#define RTQ2208_REG_HIDDEN_BUCKPH 0x55
+#define RTQ2208_REG_HIDDEN0 0xFE
+#define RTQ2208_REG_HIDDEN1 0xFF
/* Mask */
#define RTQ2208_BUCK_NR_MTP_SEL_MASK GENMASK(7, 0)
@@ -45,6 +48,8 @@
#define RTQ2208_LDO1_VOSEL_SD_MASK BIT(5)
#define RTQ2208_LDO2_DISCHG_EN_MASK BIT(6)
#define RTQ2208_LDO2_VOSEL_SD_MASK BIT(7)
+#define RTQ2208_MASK_BUCKPH_GROUP1 GENMASK(6, 4)
+#define RTQ2208_MASK_BUCKPH_GROUP2 GENMASK(2, 0)
/* Size */
#define RTQ2208_VOUT_MAXNUM 256
@@ -524,27 +529,75 @@ static int rtq2208_parse_regulator_dt_data(int n_regulator, const unsigned int *
}
-/** different slave address corresponds different used bucks
- * slave address 0x10: BUCK[BCA FGE]
- * slave address 0x20: BUCK[BC FGHE]
- * slave address 0x40: BUCK[C G]
- */
-static int rtq2208_regulator_check(int slave_addr, int *num,
+static int rtq2208_regulator_check(struct device *dev, int *num,
int *regulator_idx_table, unsigned int *buck_masks)
{
- static bool rtq2208_used_table[3][RTQ2208_LDO_MAX] = {
- /* BUCK[BCA FGE], LDO[12] */
- {1, 1, 0, 1, 1, 1, 0, 1, 1, 1},
- /* BUCK[BC FGHE], LDO[12]*/
- {1, 1, 0, 0, 1, 1, 1, 1, 1, 1},
- /* BUCK[C G], LDO[12] */
- {0, 1, 0, 0, 0, 1, 0, 0, 1, 1},
- };
- int i, idx = ffs(slave_addr >> 4) - 1;
+ struct regmap *regmap = dev_get_regmap(dev, NULL);
+ bool rtq2208_used_table[RTQ2208_LDO_MAX] = {0};
+ u8 entry_key[] = { 0x69, 0x01 };
+ unsigned int buck_phase;
+ int i, ret;
u8 mask;
+ ret = regmap_raw_write(regmap, RTQ2208_REG_HIDDEN0, entry_key, ARRAY_SIZE(entry_key));
+ if (ret)
+ return dev_err_probe(dev, ret, "Failed to enter hidden page\n");
+
+ ret = regmap_read(regmap, RTQ2208_REG_HIDDEN_BUCKPH, &buck_phase);
+ if (ret)
+ return dev_err_probe(dev, ret, "Failed to read buck phase configuration\n");
+
+ ret = regmap_write(regmap, RTQ2208_REG_HIDDEN1, 0x00);
+ if (ret)
+ return dev_err_probe(dev, ret, "Failed to exit hidden page\n");
+
+ dev_info(dev, "BUCK Phase 0x%x\n", buck_phase);
+ /*
+ * Use buck phase configuration to assign used table mask
+ * GROUP1 GROUP2
+ * 0 -> 2P + 2P BC FG
+ * 1 -> 2P + 1P + 1P BCA FGE
+ * 2 -> 1P + 1P + 1P + 1P BCDA FGHE
+ * 3 -> 3P + 1P BC FG
+ * others -> 4P C G
+ */
+ switch (FIELD_GET(RTQ2208_MASK_BUCKPH_GROUP1, buck_phase)) {
+ case 2:
+ rtq2208_used_table[RTQ2208_BUCK_D] = true;
+ fallthrough;
+ case 1:
+ rtq2208_used_table[RTQ2208_BUCK_A] = true;
+ fallthrough;
+ case 0:
+ case 3:
+ rtq2208_used_table[RTQ2208_BUCK_B] = true;
+ fallthrough;
+ default:
+ rtq2208_used_table[RTQ2208_BUCK_C] = true;
+ break;
+ }
+
+ switch (FIELD_GET(RTQ2208_MASK_BUCKPH_GROUP2, buck_phase)) {
+ case 2:
+ rtq2208_used_table[RTQ2208_BUCK_F] = true;
+ fallthrough;
+ case 1:
+ rtq2208_used_table[RTQ2208_BUCK_E] = true;
+ fallthrough;
+ case 0:
+ case 3:
+ rtq2208_used_table[RTQ2208_BUCK_H] = true;
+ fallthrough;
+ default:
+ rtq2208_used_table[RTQ2208_BUCK_G] = true;
+ break;
+ }
+
+ /* By default, LDO1 & LDO2 are always used */
+ rtq2208_used_table[RTQ2208_LDO1] = rtq2208_used_table[RTQ2208_LDO2] = true;
+
for (i = 0; i < RTQ2208_LDO_MAX; i++) {
- if (!rtq2208_used_table[idx][i])
+ if (!rtq2208_used_table[i])
continue;
regulator_idx_table[(*num)++] = i;
@@ -559,7 +612,7 @@ static int rtq2208_regulator_check(int slave_addr, int *num,
static const struct regmap_config rtq2208_regmap_config = {
.reg_bits = 8,
.val_bits = 8,
- .max_register = 0xEF,
+ .max_register = 0xFF,
};
static int rtq2208_probe(struct i2c_client *i2c)
@@ -583,7 +636,7 @@ static int rtq2208_probe(struct i2c_client *i2c)
return dev_err_probe(dev, PTR_ERR(regmap), "Failed to allocate regmap\n");
/* get needed regulator */
- ret = rtq2208_regulator_check(i2c->addr, &n_regulator, regulator_idx_table, buck_masks);
+ ret = rtq2208_regulator_check(dev, &n_regulator, regulator_idx_table, buck_masks);
if (ret)
return dev_err_probe(dev, ret, "Failed to check used regulators\n");
--
2.34.1
Powered by blists - more mailing lists