linux-kernel - [PATCH 1/2] firmware: exynos-acpm: use ktime APIs for timeout detection

lists.openwall.net		lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC
Open Source and information security mailing list archives

Hash Suite: Windows password security audit tool. GUI, reports in PDF.

[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]

Message-Id: <20250321-acpm-atomic-v1-1-fb887bde7e61@linaro.org>
Date: Fri, 21 Mar 2025 16:40:57 +0000
From: André Draszik <andre.draszik@...aro.org>
To: Tudor Ambarus <tudor.ambarus@...aro.org>, 
 Krzysztof Kozlowski <krzk@...nel.org>, 
 Alim Akhtar <alim.akhtar@...sung.com>
Cc: Peter Griffin <peter.griffin@...aro.org>, 
 Will McVicker <willmcvicker@...gle.com>, kernel-team@...roid.com, 
 linux-kernel@...r.kernel.org, linux-samsung-soc@...r.kernel.org, 
 linux-arm-kernel@...ts.infradead.org, 
 André Draszik <andre.draszik@...aro.org>
Subject: [PATCH 1/2] firmware: exynos-acpm: use ktime APIs for timeout
 detection

acpm_dequeue_by_polling() uses a loop counter and assumes that each
iteration of the loop takes 20us. It may take longer, though, because
usleep_range() may sleep a different amount.

Switch to using ktime_get() / ktime_after() to detect the timeout
condition more reliably.

This change also makes the code easier to follow and it allows us to
adjust the sleep without having to adjust the loop counter exit
condition. This will come in useful in a follow-up patch that changes
the delays.

Signed-off-by: André Draszik <andre.draszik@...aro.org>
---
 drivers/firmware/samsung/exynos-acpm.c | 13 ++++++-------
 1 file changed, 6 insertions(+), 7 deletions(-)

diff --git a/drivers/firmware/samsung/exynos-acpm.c b/drivers/firmware/samsung/exynos-acpm.c
index a85b2dbdd9f0d7b1f327f54a0a283e4f32587a98..d7ed6b77a957af5db5beba7deecce13ac7b30fd2 100644
--- a/drivers/firmware/samsung/exynos-acpm.c
+++ b/drivers/firmware/samsung/exynos-acpm.c
@@ -32,8 +32,7 @@
 
 #define ACPM_PROTOCOL_SEQNUM		GENMASK(21, 16)
 
-/* The unit of counter is 20 us. 5000 * 20 = 100 ms */
-#define ACPM_POLL_TIMEOUT		5000
+#define ACPM_POLL_TIMEOUT_US		(100 * USEC_PER_MSEC)
 #define ACPM_TX_TIMEOUT_US		500000
 
 #define ACPM_GS101_INITDATA_BASE	0xa000
@@ -284,12 +283,13 @@ static int acpm_dequeue_by_polling(struct acpm_chan *achan,
 				   const struct acpm_xfer *xfer)
 {
 	struct device *dev = achan->acpm->dev;
-	unsigned int cnt_20us = 0;
+	ktime_t timeout;
 	u32 seqnum;
 	int ret;
 
 	seqnum = FIELD_GET(ACPM_PROTOCOL_SEQNUM, xfer->txd[0]);
 
+	timeout = ktime_add_us(ktime_get(), ACPM_POLL_TIMEOUT_US);
 	do {
 		ret = acpm_get_rx(achan, xfer);
 		if (ret)
@@ -300,11 +300,10 @@ static int acpm_dequeue_by_polling(struct acpm_chan *achan,
 
 		/* Determined experimentally. */
 		usleep_range(20, 30);
-		cnt_20us++;
-	} while (cnt_20us < ACPM_POLL_TIMEOUT);
+	} while (!ktime_after(ktime_get(), timeout));
 
-	dev_err(dev, "Timeout! ch:%u s:%u bitmap:%lx, cnt_20us = %d.\n",
-		achan->id, seqnum, achan->bitmap_seqnum[0], cnt_20us);
+	dev_err(dev, "Timeout! ch:%u s:%u bitmap:%lx.\n",
+		achan->id, seqnum, achan->bitmap_seqnum[0]);
 
 	return -ETIME;
 }

-- 
2.49.0.395.g12beb8f557-goog