[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <905d367f-ff06-4a3b-b410-1e3c65e31f54@lunn.ch>
Date: Fri, 21 Mar 2025 22:16:54 +0100
From: Andrew Lunn <andrew@...n.ch>
To: Théo Lebrun <theo.lebrun@...tlin.com>
Cc: Andrew Lunn <andrew+netdev@...n.ch>,
"David S. Miller" <davem@...emloft.net>,
Eric Dumazet <edumazet@...gle.com>,
Jakub Kicinski <kuba@...nel.org>, Paolo Abeni <pabeni@...hat.com>,
Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>,
Nicolas Ferre <nicolas.ferre@...rochip.com>,
Claudiu Beznea <claudiu.beznea@...on.dev>,
Paul Walmsley <paul.walmsley@...ive.com>,
Palmer Dabbelt <palmer@...belt.com>,
Albert Ou <aou@...s.berkeley.edu>, Alexandre Ghiti <alex@...ti.fr>,
Samuel Holland <samuel.holland@...ive.com>,
Richard Cochran <richardcochran@...il.com>,
Russell King <linux@...linux.org.uk>,
Thomas Bogendoerfer <tsbogend@...ha.franken.de>,
Vladimir Kondratiev <vladimir.kondratiev@...ileye.com>,
Gregory CLEMENT <gregory.clement@...tlin.com>,
netdev@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-riscv@...ts.infradead.org,
linux-mips@...r.kernel.org,
Thomas Petazzoni <thomas.petazzoni@...tlin.com>,
Tawfik Bayouk <tawfik.bayouk@...ileye.com>
Subject: Re: [PATCH net-next 13/13] MIPS: mobileye: eyeq5-epm: add two
Cadence GEM Ethernet PHYs
On Fri, Mar 21, 2025 at 08:09:44PM +0100, Théo Lebrun wrote:
> The Mobileye EyeQ5 eval board (EPM) embeds two MDIO PHYs.
>
> Signed-off-by: Théo Lebrun <theo.lebrun@...tlin.com>
> ---
> arch/mips/boot/dts/mobileye/eyeq5-epm5.dts | 26 ++++++++++++++++++++++++++
> 1 file changed, 26 insertions(+)
>
> diff --git a/arch/mips/boot/dts/mobileye/eyeq5-epm5.dts b/arch/mips/boot/dts/mobileye/eyeq5-epm5.dts
> index 6898b2d8267dfadeea511a84d1df3f70744f17bb..20dfc85681bb03330981ca0f11b2edfff3fa57bc 100644
> --- a/arch/mips/boot/dts/mobileye/eyeq5-epm5.dts
> +++ b/arch/mips/boot/dts/mobileye/eyeq5-epm5.dts
> @@ -21,3 +21,29 @@ memory@0 {
> <0x8 0x02000000 0x0 0x7E000000>;
> };
> };
> +
> +&macb0 {
> + phy-mode = "sgmii";
> + phy-handle = <&macb0_phy>;
> +
> + mdio {
> + #address-cells = <1>;
> + #size-cells = <0>;
> + macb0_phy: ethernet-phy@e {
> + reg = <0xE>;
The DT coding style might say this should be lower case?
> + };
> + };
> +};
> +
> +&macb1 {
> + phy-mode = "rgmii-id";
Hurrah. A correct rgmii phy-mode.
Reviewed-by: Andrew Lunn <andrew@...n.ch>
Andrew
Powered by blists - more mailing lists