[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <174255332861.2810991.11878697286839237760.robh@kernel.org>
Date: Fri, 21 Mar 2025 05:35:28 -0500
From: "Rob Herring (Arm)" <robh@...nel.org>
To: George Moussalem <george.moussalem@...look.com>
Cc: Nitheesh Sekar <quic_nsekar@...cinc.com>,
Bjorn Andersson <andersson@...nel.org>,
Konrad Dybcio <konradybcio@...nel.org>,
20250317100029.881286-2-quic_varada@...cinc.com,
Varadarajan Narayanan <quic_varada@...cinc.com>, devicetree@...r.kernel.org,
linux-pci@...r.kernel.org, Krzysztof Kozlowski <krzk+dt@...nel.org>,
Bjorn Helgaas <bhelgaas@...gle.com>,
Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>,
Lorenzo Pieralisi <lpieralisi@...nel.org>,
Conor Dooley <conor+dt@...nel.org>, linux-phy@...ts.infradead.org,
linux-kernel@...r.kernel.org,
Sricharan Ramabadhran <quic_srichara@...cinc.com>,
Manivannan Sadhasivam <manivannan.sadhasivam@...aro.org>,
Vinod Koul <vkoul@...nel.org>, Kishon Vijay Abraham I <kishon@...nel.org>,
linux-arm-msm@...r.kernel.org,
Krzysztof WilczyĆski <kw@...ux.com>
Subject: Re: [PATCH v5 1/6] dt-bindings: phy: qcom: uniphy-pcie: Add
ipq5018 compatible
On Fri, 21 Mar 2025 13:09:50 +0400, George Moussalem wrote:
> From: Nitheesh Sekar <quic_nsekar@...cinc.com>
>
> The IPQ5018 SoC contains a Gen2 1 and 2-lane PCIe UNIPHY which is the
> same as the one found in IPQ5332. As such, add IPQ5018 compatible.
>
> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
> Signed-off-by: Nitheesh Sekar <quic_nsekar@...cinc.com>
> Signed-off-by: Sricharan Ramabadhran <quic_srichara@...cinc.com>
> Signed-off-by: George Moussalem <george.moussalem@...look.com>
> ---
> .../bindings/phy/qcom,ipq5332-uniphy-pcie-phy.yaml | 57 +++++++++++++++++++---
> 1 file changed, 49 insertions(+), 8 deletions(-)
>
My bot found errors running 'make dt_binding_check' on your patch:
yamllint warnings/errors:
dtschema/dtc warnings/errors:
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/phy/qcom,ipq5332-uniphy-pcie-phy.yaml: allOf:0:then:properties:clocks: {'minItems': 1, 'maxItems': 1, 'items': [{'description': 'pcie pipe clock'}]} should not be valid under {'required': ['maxItems']}
hint: "maxItems" is not needed with an "items" list
from schema $id: http://devicetree.org/meta-schemas/items.yaml#
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/phy/qcom,ipq5332-uniphy-pcie-phy.yaml: allOf:0:then:properties:clocks: 'oneOf' conditional failed, one must be fixed:
[{'description': 'pcie pipe clock'}] is too short
False schema does not allow 1
hint: "minItems" is only needed if less than the "items" list length
from schema $id: http://devicetree.org/meta-schemas/items.yaml#
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/phy/qcom,ipq5332-uniphy-pcie-phy.yaml: allOf:0:then:properties:resets: {'minItems': 2, 'maxItems': 2, 'items': [{'description': 'phy reset'}, {'description': 'cfg reset'}]} should not be valid under {'required': ['maxItems']}
hint: "maxItems" is not needed with an "items" list
from schema $id: http://devicetree.org/meta-schemas/items.yaml#
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/phy/qcom,ipq5332-uniphy-pcie-phy.yaml: allOf:0:then:properties:resets: 'oneOf' conditional failed, one must be fixed:
[{'description': 'phy reset'}, {'description': 'cfg reset'}] is too long
[{'description': 'phy reset'}, {'description': 'cfg reset'}] is too short
False schema does not allow 2
1 was expected
hint: "minItems" is only needed if less than the "items" list length
from schema $id: http://devicetree.org/meta-schemas/items.yaml#
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/phy/qcom,ipq5332-uniphy-pcie-phy.yaml: allOf:1:then:properties:clocks: {'minItems': 2, 'maxItems': 2, 'items': [{'description': 'pcie pipe clock'}, {'description': 'pcie ahb clock'}]} should not be valid under {'required': ['maxItems']}
hint: "maxItems" is not needed with an "items" list
from schema $id: http://devicetree.org/meta-schemas/items.yaml#
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/phy/qcom,ipq5332-uniphy-pcie-phy.yaml: allOf:1:then:properties:clocks: 'oneOf' conditional failed, one must be fixed:
[{'description': 'pcie pipe clock'}, {'description': 'pcie ahb clock'}] is too long
[{'description': 'pcie pipe clock'}, {'description': 'pcie ahb clock'}] is too short
False schema does not allow 2
1 was expected
hint: "minItems" is only needed if less than the "items" list length
from schema $id: http://devicetree.org/meta-schemas/items.yaml#
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/phy/qcom,ipq5332-uniphy-pcie-phy.yaml: allOf:1:then:properties:resets: {'minItems': 3, 'maxItems': 3, 'items': [{'description': 'phy reset'}, {'description': 'ahb reset'}, {'description': 'cfg reset'}]} should not be valid under {'required': ['maxItems']}
hint: "maxItems" is not needed with an "items" list
from schema $id: http://devicetree.org/meta-schemas/items.yaml#
/builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/phy/qcom,ipq5332-uniphy-pcie-phy.yaml: allOf:1:then:properties:resets: 'oneOf' conditional failed, one must be fixed:
[{'description': 'phy reset'}, {'description': 'ahb reset'}, {'description': 'cfg reset'}] is too long
[{'description': 'phy reset'}, {'description': 'ahb reset'}, {'description': 'cfg reset'}] is too short
False schema does not allow 3
1 was expected
3 is greater than the maximum of 2
hint: "minItems" is only needed if less than the "items" list length
from schema $id: http://devicetree.org/meta-schemas/items.yaml#
doc reference errors (make refcheckdocs):
See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20250321-ipq5018-pcie-v5-1-aae2caa1f418@outlook.com
The base for the series is generally the latest rc1. A different dependency
should be noted in *this* patch.
If you already ran 'make dt_binding_check' and didn't see the above
error(s), then make sure 'yamllint' is installed and dt-schema is up to
date:
pip3 install dtschema --upgrade
Please check and re-submit after running the above command yourself. Note
that DT_SCHEMA_FILES can be set to your schema file to speed up checking
your schema. However, it must be unset to test all examples with your schema.
Powered by blists - more mailing lists