[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID:
<DS7PR19MB8883D5940E9B1AD153C6415A9DDB2@DS7PR19MB8883.namprd19.prod.outlook.com>
Date: Fri, 21 Mar 2025 14:43:05 +0400
From: George Moussalem <george.moussalem@...look.com>
To: "Rob Herring (Arm)" <robh@...nel.org>
Cc: Nitheesh Sekar <quic_nsekar@...cinc.com>,
Bjorn Andersson <andersson@...nel.org>,
Konrad Dybcio <konradybcio@...nel.org>,
20250317100029.881286-2-quic_varada@...cinc.com,
Varadarajan Narayanan <quic_varada@...cinc.com>, devicetree@...r.kernel.org,
linux-pci@...r.kernel.org, Krzysztof Kozlowski <krzk+dt@...nel.org>,
Bjorn Helgaas <bhelgaas@...gle.com>,
Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>,
Lorenzo Pieralisi <lpieralisi@...nel.org>, Conor Dooley
<conor+dt@...nel.org>, linux-phy@...ts.infradead.org,
linux-kernel@...r.kernel.org,
Sricharan Ramabadhran <quic_srichara@...cinc.com>,
Manivannan Sadhasivam <manivannan.sadhasivam@...aro.org>,
Vinod Koul <vkoul@...nel.org>, Kishon Vijay Abraham I <kishon@...nel.org>,
linux-arm-msm@...r.kernel.org, Krzysztof WilczyĆski
<kw@...ux.com>
Subject: Re: [PATCH v5 1/6] dt-bindings: phy: qcom: uniphy-pcie: Add ipq5018
compatible
On 3/21/25 14:35, Rob Herring (Arm) wrote:
>
> On Fri, 21 Mar 2025 13:09:50 +0400, George Moussalem wrote:
>> From: Nitheesh Sekar <quic_nsekar@...cinc.com>
>>
>> The IPQ5018 SoC contains a Gen2 1 and 2-lane PCIe UNIPHY which is the
>> same as the one found in IPQ5332. As such, add IPQ5018 compatible.
>>
>> Acked-by: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
>> Signed-off-by: Nitheesh Sekar <quic_nsekar@...cinc.com>
>> Signed-off-by: Sricharan Ramabadhran <quic_srichara@...cinc.com>
>> Signed-off-by: George Moussalem <george.moussalem@...look.com>
>> ---
>> .../bindings/phy/qcom,ipq5332-uniphy-pcie-phy.yaml | 57 +++++++++++++++++++---
>> 1 file changed, 49 insertions(+), 8 deletions(-)
>>
>
> My bot found errors running 'make dt_binding_check' on your patch:
>
> yamllint warnings/errors:
>
> dtschema/dtc warnings/errors:
> /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/phy/qcom,ipq5332-uniphy-pcie-phy.yaml: allOf:0:then:properties:clocks: {'minItems': 1, 'maxItems': 1, 'items': [{'description': 'pcie pipe clock'}]} should not be valid under {'required': ['maxItems']}
> hint: "maxItems" is not needed with an "items" list
> from schema $id: http://devicetree.org/meta-schemas/items.yaml#
> /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/phy/qcom,ipq5332-uniphy-pcie-phy.yaml: allOf:0:then:properties:clocks: 'oneOf' conditional failed, one must be fixed:
> [{'description': 'pcie pipe clock'}] is too short
> False schema does not allow 1
> hint: "minItems" is only needed if less than the "items" list length
> from schema $id: http://devicetree.org/meta-schemas/items.yaml#
> /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/phy/qcom,ipq5332-uniphy-pcie-phy.yaml: allOf:0:then:properties:resets: {'minItems': 2, 'maxItems': 2, 'items': [{'description': 'phy reset'}, {'description': 'cfg reset'}]} should not be valid under {'required': ['maxItems']}
> hint: "maxItems" is not needed with an "items" list
> from schema $id: http://devicetree.org/meta-schemas/items.yaml#
> /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/phy/qcom,ipq5332-uniphy-pcie-phy.yaml: allOf:0:then:properties:resets: 'oneOf' conditional failed, one must be fixed:
> [{'description': 'phy reset'}, {'description': 'cfg reset'}] is too long
> [{'description': 'phy reset'}, {'description': 'cfg reset'}] is too short
> False schema does not allow 2
> 1 was expected
> hint: "minItems" is only needed if less than the "items" list length
> from schema $id: http://devicetree.org/meta-schemas/items.yaml#
> /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/phy/qcom,ipq5332-uniphy-pcie-phy.yaml: allOf:1:then:properties:clocks: {'minItems': 2, 'maxItems': 2, 'items': [{'description': 'pcie pipe clock'}, {'description': 'pcie ahb clock'}]} should not be valid under {'required': ['maxItems']}
> hint: "maxItems" is not needed with an "items" list
> from schema $id: http://devicetree.org/meta-schemas/items.yaml#
> /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/phy/qcom,ipq5332-uniphy-pcie-phy.yaml: allOf:1:then:properties:clocks: 'oneOf' conditional failed, one must be fixed:
> [{'description': 'pcie pipe clock'}, {'description': 'pcie ahb clock'}] is too long
> [{'description': 'pcie pipe clock'}, {'description': 'pcie ahb clock'}] is too short
> False schema does not allow 2
> 1 was expected
> hint: "minItems" is only needed if less than the "items" list length
> from schema $id: http://devicetree.org/meta-schemas/items.yaml#
> /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/phy/qcom,ipq5332-uniphy-pcie-phy.yaml: allOf:1:then:properties:resets: {'minItems': 3, 'maxItems': 3, 'items': [{'description': 'phy reset'}, {'description': 'ahb reset'}, {'description': 'cfg reset'}]} should not be valid under {'required': ['maxItems']}
> hint: "maxItems" is not needed with an "items" list
> from schema $id: http://devicetree.org/meta-schemas/items.yaml#
> /builds/robherring/dt-review-ci/linux/Documentation/devicetree/bindings/phy/qcom,ipq5332-uniphy-pcie-phy.yaml: allOf:1:then:properties:resets: 'oneOf' conditional failed, one must be fixed:
> [{'description': 'phy reset'}, {'description': 'ahb reset'}, {'description': 'cfg reset'}] is too long
> [{'description': 'phy reset'}, {'description': 'ahb reset'}, {'description': 'cfg reset'}] is too short
> False schema does not allow 3
> 1 was expected
> 3 is greater than the maximum of 2
> hint: "minItems" is only needed if less than the "items" list length
> from schema $id: http://devicetree.org/meta-schemas/items.yaml#
>
> doc reference errors (make refcheckdocs):
>
> See https://patchwork.ozlabs.org/project/devicetree-bindings/patch/20250321-ipq5018-pcie-v5-1-aae2caa1f418@outlook.com
>
> The base for the series is generally the latest rc1. A different dependency
> should be noted in *this* patch.
>
> If you already ran 'make dt_binding_check' and didn't see the above
> error(s), then make sure 'yamllint' is installed and dt-schema is up to
> date:
>
> pip3 install dtschema --upgrade
thanks, did the upgrade and see the errors. Will fix in next version.
much appreciated!
>
> Please check and re-submit after running the above command yourself. Note
> that DT_SCHEMA_FILES can be set to your schema file to speed up checking
> your schema. However, it must be unset to test all examples with your schema.
>
Best regards,
George
Powered by blists - more mailing lists