[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <CAO9ioeWLRfzUOwjnFsi_yztdJo2Q25bhvjddh6D3naV_K5eShA@mail.gmail.com>
Date: Fri, 21 Mar 2025 15:16:36 +0200
From: Dmitry Baryshkov <dmitry.baryshkov@....qualcomm.com>
To: Srinivas Kandagatla <srinivas.kandagatla@...aro.org>
Cc: peda@...ntia.se, broonie@...nel.org, andersson@...nel.org,
krzk+dt@...nel.org, ivprusov@...utedevices.com,
luca.ceresoli@...tlin.com, zhoubinbin@...ngson.cn,
paulha@...nsource.cirrus.com, lgirdwood@...il.com, robh@...nel.org,
conor+dt@...nel.org, konradybcio@...nel.org, perex@...ex.cz,
tiwai@...e.com, linux-sound@...r.kernel.org,
linux-arm-msm@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, johan+linaro@...nel.org
Subject: Re: [PATCH v2 4/5] ASoC: codecs: wcd938x: add mux control support for
hp audio mux
On Fri, 21 Mar 2025 at 14:35, Srinivas Kandagatla
<srinivas.kandagatla@...aro.org> wrote:
>
>
>
> On 20/03/2025 14:03, Dmitry Baryshkov wrote:
> > On Thu, Mar 20, 2025 at 11:56:32AM +0000, srinivas.kandagatla@...aro.org wrote:
> >> From: Srinivas Kandagatla <srinivas.kandagatla@...aro.org>
> >>
> >> On some platforms to minimise pop and click during switching between
> >> CTIA and OMTP headset an additional HiFi mux is used. Most common
> >> case is that this switch is switched on by default, but on some
> >> platforms this needs a regulator enable.
> >>
> >> move to using mux control to enable both regulator and handle gpios,
> >> deprecate the usage of gpio.
> >>
> >> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@...aro.org>
> >> ---
> >> sound/soc/codecs/Kconfig | 2 ++
> >> sound/soc/codecs/wcd938x.c | 38 ++++++++++++++++++++++++++++++--------
> >> 2 files changed, 32 insertions(+), 8 deletions(-)
> >>
> >> diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig
> >> index ee35f3aa5521..b04076282c8b 100644
> >> --- a/sound/soc/codecs/Kconfig
> >> +++ b/sound/soc/codecs/Kconfig
> >> @@ -2226,6 +2226,8 @@ config SND_SOC_WCD938X
> >> tristate
> >> depends on SOUNDWIRE || !SOUNDWIRE
> >> select SND_SOC_WCD_CLASSH
> >> + select MULTIPLEXER
> >> + imply MUX_GPIO
> >
> > Why? This is true for a particular platform, isn't it?
>
> We want to move the codec to use gpio mux instead of using gpios directly
>
> So this become codec specific, rather than platform.
Not quite. "select MULTIPLEXER" is correct and is not questionable.
I'm asking about the MUX_GPIO. The codec itself has nothing to do with
the board using _GPIO_ to switch 4-pin modes. It is a board-level
decision. A board can use an I2C-controlled MUX instead. I'd say, that
at least you should describe rationale for this `imply` clause in the
commit message.
--
With best wishes
Dmitry
Powered by blists - more mailing lists