lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <1d93f731-66c1-47b2-a249-9bdb25205525@linaro.org>
Date: Fri, 21 Mar 2025 13:26:44 +0000
From: Srinivas Kandagatla <srinivas.kandagatla@...aro.org>
To: Dmitry Baryshkov <dmitry.baryshkov@....qualcomm.com>
Cc: peda@...ntia.se, broonie@...nel.org, andersson@...nel.org,
 krzk+dt@...nel.org, ivprusov@...utedevices.com, luca.ceresoli@...tlin.com,
 zhoubinbin@...ngson.cn, paulha@...nsource.cirrus.com, lgirdwood@...il.com,
 robh@...nel.org, conor+dt@...nel.org, konradybcio@...nel.org,
 perex@...ex.cz, tiwai@...e.com, linux-sound@...r.kernel.org,
 linux-arm-msm@...r.kernel.org, devicetree@...r.kernel.org,
 linux-kernel@...r.kernel.org, johan+linaro@...nel.org
Subject: Re: [PATCH v2 4/5] ASoC: codecs: wcd938x: add mux control support for
 hp audio mux



On 21/03/2025 13:16, Dmitry Baryshkov wrote:
> On Fri, 21 Mar 2025 at 14:35, Srinivas Kandagatla
> <srinivas.kandagatla@...aro.org> wrote:
>>
>>
>>
>> On 20/03/2025 14:03, Dmitry Baryshkov wrote:
>>> On Thu, Mar 20, 2025 at 11:56:32AM +0000, srinivas.kandagatla@...aro.org wrote:
>>>> From: Srinivas Kandagatla <srinivas.kandagatla@...aro.org>
>>>>
>>>> On some platforms to minimise pop and click during switching between
>>>> CTIA and OMTP headset an additional HiFi mux is used. Most common
>>>> case is that this switch is switched on by default, but on some
>>>> platforms this needs a regulator enable.
>>>>
>>>> move to using mux control to enable both regulator and handle gpios,
>>>> deprecate the usage of gpio.
>>>>
>>>> Signed-off-by: Srinivas Kandagatla <srinivas.kandagatla@...aro.org>
>>>> ---
>>>>    sound/soc/codecs/Kconfig   |  2 ++
>>>>    sound/soc/codecs/wcd938x.c | 38 ++++++++++++++++++++++++++++++--------
>>>>    2 files changed, 32 insertions(+), 8 deletions(-)
>>>>
>>>> diff --git a/sound/soc/codecs/Kconfig b/sound/soc/codecs/Kconfig
>>>> index ee35f3aa5521..b04076282c8b 100644
>>>> --- a/sound/soc/codecs/Kconfig
>>>> +++ b/sound/soc/codecs/Kconfig
>>>> @@ -2226,6 +2226,8 @@ config SND_SOC_WCD938X
>>>>       tristate
>>>>       depends on SOUNDWIRE || !SOUNDWIRE
>>>>       select SND_SOC_WCD_CLASSH
>>>> +    select MULTIPLEXER
>>>> +    imply MUX_GPIO
>>>
>>> Why? This is true for a particular platform, isn't it?
>>
>> We want to move the codec to use gpio mux instead of using gpios directly
>>
>> So this become codec specific, rather than platform.
> 
> Not quite. "select MULTIPLEXER" is correct and is not questionable.
> I'm asking about the MUX_GPIO. The codec itself has nothing to do with
> the board using _GPIO_ to switch 4-pin modes. It is a board-level
> decision. A board can use an I2C-controlled MUX instead. I'd say, that
> at least you should describe rationale for this `imply` clause in the
> commit message.

I agree to you point, but historically in this case us/euro selection is 
only driven by gpio. But I see no harm in moving the MUX_GPIO dependency 
to machine driver KConfigs.

Will fix this in v3.

thanks,
Srini
> 

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ