[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID:
<DS7PR19MB8883D7102C8A7BE2A87B77009DA42@DS7PR19MB8883.namprd19.prod.outlook.com>
Date: Mon, 24 Mar 2025 12:06:29 +0400
From: George Moussalem <george.moussalem@...look.com>
To: Dmitry Baryshkov <dmitry.baryshkov@....qualcomm.com>
Cc: Vinod Koul <vkoul@...nel.org>, Kishon Vijay Abraham I
<kishon@...nel.org>, Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>, Conor Dooley
<conor+dt@...nel.org>, Nitheesh Sekar <quic_nsekar@...cinc.com>,
Varadarajan Narayanan <quic_varada@...cinc.com>,
Bjorn Helgaas <bhelgaas@...gle.com>,
Lorenzo Pieralisi <lpieralisi@...nel.org>,
Krzysztof WilczyĆski <kw@...ux.com>,
Manivannan Sadhasivam <manivannan.sadhasivam@...aro.org>,
Bjorn Andersson <andersson@...nel.org>,
Konrad Dybcio <konradybcio@...nel.org>, linux-arm-msm@...r.kernel.org,
linux-phy@...ts.infradead.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-pci@...r.kernel.org,
20250317100029.881286-2-quic_varada@...cinc.com,
Sricharan Ramabadhran <quic_srichara@...cinc.com>
Subject: Re: [PATCH v6 6/6] arm64: dts: qcom: ipq5018: Enable PCIe
On 3/21/25 18:13, Dmitry Baryshkov wrote:
> On Fri, Mar 21, 2025 at 04:14:44PM +0400, George Moussalem via B4 Relay wrote:
>> From: Nitheesh Sekar <quic_nsekar@...cinc.com>
>>
>> Enable the PCIe controller and PHY nodes for RDP 432-c2.
>>
>> Signed-off-by: Nitheesh Sekar <quic_nsekar@...cinc.com>
>> Signed-off-by: Sricharan Ramabadhran <quic_srichara@...cinc.com>
>> Signed-off-by: George Moussalem <george.moussalem@...look.com>
>> ---
>> arch/arm64/boot/dts/qcom/ipq5018-rdp432-c2.dts | 40 ++++++++++++++++++++++++++
>> 1 file changed, 40 insertions(+)
>
> Reviewed-by: Dmitry Baryshkov <dmitry.baryshkov@....qualcomm.com>
>
> Minor question below.
>
>> +
>> +&pcie0_phy {
>> + status = "okay";
>
> If you have schematics, are you sure that there are no supplies for the
> PCIe PHY / PCIe PLLs on this board?
I don't have the schematics, but none of the boards I've personally
tested (mostly Linksys devices) require any supply. I've also checked
the downstream board files documented on codelinaro for ipq5018, and
none mention a supply.
>
>> +};
>> +
>> &sdhc_1 {
>> pinctrl-0 = <&sdc_default_state>;
>> pinctrl-names = "default";
>
Best regards,
George
Powered by blists - more mailing lists