lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20250402122058.1517393-3-andriy.shevchenko@linux.intel.com>
Date: Wed,  2 Apr 2025 15:20:01 +0300
From: Andy Shevchenko <andriy.shevchenko@...ux.intel.com>
To: Andy Shevchenko <andriy.shevchenko@...ux.intel.com>,
	linux-gpio@...r.kernel.org,
	linux-kernel@...r.kernel.org
Cc: Linus Walleij <linus.walleij@...aro.org>,
	Bartosz Golaszewski <brgl@...ev.pl>
Subject: [PATCH v1 2/2] gpiolib: of: Move Atmel HSMCI quirk up out of the regulator comment

The regulator comment in of_gpio_set_polarity_by_property()
made on top of a couple of the cases, while Atmel HSMCI quirk
is not related to that. Make it clear by moving Atmel HSMCI
quirk up out of the scope of the regulator comment.

Signed-off-by: Andy Shevchenko <andriy.shevchenko@...ux.intel.com>
---
 drivers/gpio/gpiolib-of.c | 6 +++---
 1 file changed, 3 insertions(+), 3 deletions(-)

diff --git a/drivers/gpio/gpiolib-of.c b/drivers/gpio/gpiolib-of.c
index 8fff6fdfb4a1..65f6a7177b78 100644
--- a/drivers/gpio/gpiolib-of.c
+++ b/drivers/gpio/gpiolib-of.c
@@ -268,6 +268,9 @@ static void of_gpio_set_polarity_by_property(const struct device_node *np,
 		{ "fsl,imx8qm-fec",  "phy-reset-gpios", "phy-reset-active-high" },
 		{ "fsl,s32v234-fec", "phy-reset-gpios", "phy-reset-active-high" },
 #endif
+#if IS_ENABLED(CONFIG_MMC_ATMELMCI)
+		{ "atmel,hsmci",       "cd-gpios",     "cd-inverted" },
+#endif
 #if IS_ENABLED(CONFIG_PCI_IMX6)
 		{ "fsl,imx6q-pcie",  "reset-gpio", "reset-gpio-active-high" },
 		{ "fsl,imx6sx-pcie", "reset-gpio", "reset-gpio-active-high" },
@@ -293,9 +296,6 @@ static void of_gpio_set_polarity_by_property(const struct device_node *np,
 #if IS_ENABLED(CONFIG_REGULATOR_GPIO)
 		{ "regulator-gpio",    "enable-gpio",  "enable-active-high" },
 		{ "regulator-gpio",    "enable-gpios", "enable-active-high" },
-#endif
-#if IS_ENABLED(CONFIG_MMC_ATMELMCI)
-		{ "atmel,hsmci",       "cd-gpios",     "cd-inverted" },
 #endif
 	};
 	unsigned int i;
-- 
2.47.2


Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ