[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <c020b5d7dffba6238763a3b82e941a8c218e4dad.camel@collabora.com>
Date: Mon, 07 Apr 2025 11:35:05 -0400
From: Nicolas Dufresne <nicolas.dufresne@...labora.com>
To: Jonas Karlman <jonas@...boo.se>, Hans Verkuil <hverkuil@...all.nl>
Cc: Sebastian Fricke <sebastian.fricke@...labora.com>, Mauro Carvalho Chehab
<mchehab@...nel.org>, Ezequiel Garcia <ezequiel@...guardiasur.com.ar>,
Greg Kroah-Hartman <gregkh@...uxfoundation.org>, Boris Brezillon
<boris.brezillon@...labora.com>, linux-media@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-rockchip@...ts.infradead.org,
linux-staging@...ts.linux.dev, Mauro Carvalho Chehab
<mchehab+huawei@...nel.org>, Alex Bee <knaerzche@...il.com>, Benjamin
Gaignard <benjamin.gaignard@...labora.com>, Detlev Casanova
<detlev.casanova@...labora.com>, Dan Carpenter <dan.carpenter@...aro.org>,
Christopher Obbard <christopher.obbard@...aro.org>
Subject: Re: [PATCH v7 09/12] media: rkvdec: Add get_image_fmt ops
Le lundi 07 avril 2025 à 17:07 +0200, Jonas Karlman a écrit :
> On 2025-04-07 16:59, Nicolas Dufresne wrote:
> > Le lundi 07 avril 2025 à 16:17 +0200, Hans Verkuil a écrit :
> > > On 07/04/2025 15:52, Nicolas Dufresne wrote:
> > > > Le lundi 07 avril 2025 à 13:09 +0200, Hans Verkuil a écrit :
> > > > > On 25/02/2025 10:40, Sebastian Fricke wrote:
> > > > > > From: Jonas Karlman <jonas@...boo.se>
> > > > > >
> > > > > > Add support for a get_image_fmt() ops that returns the required image
> > > > > > format.
> > > > > >
> > > > > > The CAPTURE format is reset when the required image format changes and
> > > > > > the buffer queue is not busy.
> > > > > >
> > > > > > Signed-off-by: Jonas Karlman <jonas@...boo.se>
> > > > > > Reviewed-by: Nicolas Dufresne <nicolas.dufresne@...labora.com>
> > > > > > Tested-by: Nicolas Dufresne <nicolas.dufresne@...labora.com>
> > > > > > Tested-by: Christopher Obbard <chris.obbard@...labora.com>
> > > > > > ---
> > > > > > drivers/staging/media/rkvdec/rkvdec.c | 49 +++++++++++++++++++++++++++++++++--
> > > > > > drivers/staging/media/rkvdec/rkvdec.h | 2 ++
> > > > > > 2 files changed, 49 insertions(+), 2 deletions(-)
> > > > > >
> > > > > > diff --git a/drivers/staging/media/rkvdec/rkvdec.c b/drivers/staging/media/rkvdec/rkvdec.c
> > > > > > index 70154948b4e32e2c439f259b0f1e1bbc8b52b063..5394079509305c619f1d0c1f542bfc409317c3b7 100644
> > > > > > --- a/drivers/staging/media/rkvdec/rkvdec.c
> > > > > > +++ b/drivers/staging/media/rkvdec/rkvdec.c
> > > > > > @@ -111,15 +111,60 @@ static int rkvdec_try_ctrl(struct v4l2_ctrl *ctrl)
> > > > > > {
> > > > > > struct rkvdec_ctx *ctx = container_of(ctrl->handler, struct rkvdec_ctx, ctrl_hdl);
> > > > > > const struct rkvdec_coded_fmt_desc *desc = ctx->coded_fmt_desc;
> > > > > > + struct v4l2_pix_format_mplane *pix_mp = &ctx->decoded_fmt.fmt.pix_mp;
> > > > > > + enum rkvdec_image_fmt image_fmt;
> > > > > > + struct vb2_queue *vq;
> > > > > > + int ret;
> > > > > > +
> > > > > > + if (desc->ops->try_ctrl) {
> > > > > > + ret = desc->ops->try_ctrl(ctx, ctrl);
> > > > > > + if (ret)
> > > > > > + return ret;
> > > > > > + }
> > > > > > +
> > > > > > + if (!desc->ops->get_image_fmt)
> > > > > > + return 0;
> > > > > >
> > > > > > - if (desc->ops->try_ctrl)
> > > > > > - return desc->ops->try_ctrl(ctx, ctrl);
> > > > > > + image_fmt = desc->ops->get_image_fmt(ctx, ctrl);
> > > > > > + if (ctx->image_fmt == image_fmt)
> > > > > > + return 0;
> > > > > > +
> > > > > > + if (rkvdec_is_valid_fmt(ctx, pix_mp->pixelformat, image_fmt))
> > > > > > + return 0;
> > > > > > +
> > > > > > + /* format change not allowed when queue is busy */
> > > > > > + vq = v4l2_m2m_get_vq(ctx->fh.m2m_ctx,
> > > > > > + V4L2_BUF_TYPE_VIDEO_CAPTURE_MPLANE);
> > > > > > + if (vb2_is_busy(vq))
> > > > > > + return -EINVAL;
> > >
> > > Looking closer, this code is just wrong. It does these format change
> > > tests for any control, so if more controls are added in the future, then
> > > those will be checked the same way, which makes no sense.
> >
> > "Just wrong" should be kept for code that is semantically incorrect,
> > just a suggestion for choice of wording.
> >
> > >
> > > These tests belong to the actual control that you 'try'. In this case
> > > rkvdec_h264_validate_sps(). This function already checks the width and
> > > height, but it should also check the image format. It is all in the
> > > wrong place.
>
> Keep in mind that rkvdec_try_ctrl and rkvdec_s_ctrl are only used for
> CID_STATELESS_H264_SPS (and in future also CID_STATELESS_HEVC_SPS) not
> any other control, so this is already in the correct place?
>
> Maybe the naming of the functions are too generic, they could be named
> rkvdec_sps_try_ctrl and rkvdec_sps_s_ctrl or similar if that makes more
> sense?
So we are missing that check for VP9? It will be needed for AV1 when
rkvdec2 support gets added.
Nicolas
>
> Regards,
> Jonas
>
> >
> > We can do that too. Though, this was generalized since once you enable
> > the other codecs, you endup with code duplication. I know this series
> > is an extract from a larger one.
> >
> > So let's suggest to make a helper that combines rkvdec_is_valid_fmt()
> > and the busy check. Though on that, please reply to my comment below
> > (which you skipped).
> >
> > >
> > > > >
> > > > > This makes no sense to me. This just tries a control, and that should just
> > > > > work, regardless of vb2_is_busy(). It's a 'try', so you are not actually
> > > > > changing anything.
> > > >
> > > > See comment below, notice that this code is only reached if the control
> > > > introduce parameters that are not compatible with the current capture
> > > > queue fmt. The entire function uses "success" early exit, so the
> > > > further down you get in the function, the less likely your control is
> > > > valid.
> > > >
> > > > >
> > > > > > +
> > > > > > + return 0;
> > > > > > +}
> > > > > > +
> > > > > > +static int rkvdec_s_ctrl(struct v4l2_ctrl *ctrl)
> > > > > > +{
> > >
> > > If there is a try_ctrl op specified, then the control framework
> > > will call that first before calling s_ctrl. So any validation that
> > > try_ctrl did does not need to be done again in s_ctrl.
> > >
> > > The same comment with try_ctrl is valid here as well: if there are
> > > image format checks that need to be done, then those need to be done
> > > per control and not as a generic check. If new controls are added in
> > > the future, then you don't want the same checks to apply to the new
> > > controls as well.
> >
> > I don't think the behaviour of try_ctrl and that being embedded in set
> > calls was being questioned by anyone. Can you reply to the last
> > paragraph below ?
> >
> > >
> > > Regards,
> > >
> > > Hans
> > >
> > > > > > + struct rkvdec_ctx *ctx = container_of(ctrl->handler, struct rkvdec_ctx, ctrl_hdl);
> > > > > > + const struct rkvdec_coded_fmt_desc *desc = ctx->coded_fmt_desc;
> > > > > > + struct v4l2_pix_format_mplane *pix_mp = &ctx->decoded_fmt.fmt.pix_mp;
> > > > > > + enum rkvdec_image_fmt image_fmt;
> > > > > > +
> > > > > > + if (!desc->ops->get_image_fmt)
> > > > > > + return 0;
> > > > > > +
> > > > > > + image_fmt = desc->ops->get_image_fmt(ctx, ctrl);
> > > > > > + if (ctx->image_fmt == image_fmt)
> > > > > > + return 0;
> > > > >
> > > > > If you really can't set a control when the queue is busy, then that should
> > > > > be tested here, not in try_ctrl. And then you return -EBUSY.
> > > > >
> > > > > Am I missing something here?
> > > >
> > > > When I reviewed, I had imagine that s_ctrl on a request would just run
> > > > a try. Now that I read that more careful, I see that it does a true set
> > > > on separate copy. So yes, this can safely be moved here.
> > > >
> > > > Since you seem wondering "If you really can't set a control", let me
> > > > explain what Jonas wants to protect against. RKVdec does not have any
> > > > color conversion code, the header compound control (which header
> > > > depends on the codec), contains details such as sub-sampling and color
> > > > depth. Without color conversion, when the image format is locked (the
> > > > busy queue), you can't request the HW to decode a frame witch does not
> > > > fit. This could otherwise lead to buffer overflow in the HW,
> > > > fortunately protected by the iommu, but you don't really want to depend
> > > > on the mmu.
> > > >
> > > > I've never used try_ctrl in my decade of v4l2, so obviously, now that I
> > > > know that s_ctrl on request is not a try, I'm fine with rejecting this
> > > > PR, sending a new version and making a PR again. But if I was to use
> > > > this API in userspace, my intuitive expectation would be that this
> > > > should fail try(), even if its very rarely valid to check the queue
> > > > state in try control.
> >
> > Here, since we seem to disagree on the behaviour try should have for
> > this specific validation. What you asked on first pass is to make it so
> > that TRY will succeed, and SET will fail. I don't really like that
> > suggestion.
> >
> > Nicolas
> >
> > > >
> > > > Nicolas
> > > >
> > > > >
> > > > > Regards,
> > > > >
> > > > > Hans
> > > > >
> > > > > > +
> > > > > > + ctx->image_fmt = image_fmt;
> > > > > > + if (!rkvdec_is_valid_fmt(ctx, pix_mp->pixelformat, ctx->image_fmt))
> > > > > > + rkvdec_reset_decoded_fmt(ctx);
> > > > > >
> > > > > > return 0;
> > > > > > }
> > > > > >
> > > > > > static const struct v4l2_ctrl_ops rkvdec_ctrl_ops = {
> > > > > > .try_ctrl = rkvdec_try_ctrl,
> > > > > > + .s_ctrl = rkvdec_s_ctrl,
> > > > > > };
> > > > > >
> > > > > > static const struct rkvdec_ctrl_desc rkvdec_h264_ctrl_descs[] = {
> > > > > > diff --git a/drivers/staging/media/rkvdec/rkvdec.h b/drivers/staging/media/rkvdec/rkvdec.h
> > > > > > index 6f8cf50c5d99aad2f52e321f54f3ca17166ddf98..e466a2753ccfc13738e0a672bc578e521af2c3f2 100644
> > > > > > --- a/drivers/staging/media/rkvdec/rkvdec.h
> > > > > > +++ b/drivers/staging/media/rkvdec/rkvdec.h
> > > > > > @@ -73,6 +73,8 @@ struct rkvdec_coded_fmt_ops {
> > > > > > struct vb2_v4l2_buffer *dst_buf,
> > > > > > enum vb2_buffer_state result);
> > > > > > int (*try_ctrl)(struct rkvdec_ctx *ctx, struct v4l2_ctrl *ctrl);
> > > > > > + enum rkvdec_image_fmt (*get_image_fmt)(struct rkvdec_ctx *ctx,
> > > > > > + struct v4l2_ctrl *ctrl);
> > > > > > };
> > > > > >
> > > > > > enum rkvdec_image_fmt {
> > > > > >
> > > >
> >
--
Nicolas Dufresne
Principal Engineer at Collabora
Powered by blists - more mailing lists