lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite for Android: free password hash cracker in your pocket
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <c5dcf1c5b8cbf5f18a578446f18c34e7049d18d9.camel@mediatek.com>
Date: Mon, 7 Apr 2025 07:21:29 +0000
From: Kyrie Wu (吴晗) <Kyrie.Wu@...iatek.com>
To: "matthias.bgg@...il.com" <matthias.bgg@...il.com>, "mchehab@...nel.org"
	<mchehab@...nel.org>, AngeloGioacchino Del Regno
	<angelogioacchino.delregno@...labora.com>, "robh+dt@...nel.org"
	<robh+dt@...nel.org>, "hverkuil-cisco@...all.nl" <hverkuil-cisco@...all.nl>,
	"tzungbi@...omium.org" <tzungbi@...omium.org>
CC: "linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
	"linux-mediatek@...ts.infradead.org" <linux-mediatek@...ts.infradead.org>,
	"linux-media@...r.kernel.org" <linux-media@...r.kernel.org>,
	"devicetree@...r.kernel.org" <devicetree@...r.kernel.org>,
	"kyrie.wu@...iatek.corp-partner.google.com"
	<kyrie.wu@...iatek.corp-partner.google.com>,
	Bin Liu (刘彬) <bin.liu@...iatek.com>,
	"conor+dt@...nel.org" <conor+dt@...nel.org>, "robh@...nel.org"
	<robh@...nel.org>, "linux-arm-kernel@...ts.infradead.org"
	<linux-arm-kernel@...ts.infradead.org>, "krzk+dt@...nel.org"
	<krzk+dt@...nel.org>
Subject: Re: [V1,04/12] media: mediatek: jpeg: add jpeg smmu sid setting

On Fri, 2025-01-10 at 10:39 +0100, AngeloGioacchino Del Regno wrote:
> External email : Please do not click links or open attachments until
> you have verified the sender or the content.
> 
> 
> Il 09/01/25 14:35, kyrie.wu ha scritto:
> > Add a configuration to set jpeg dec & enc smmu sid
> > 
> > Signed-off-by: kyrie.wu <kyrie.wu@...iatek.com>
> > ---
> >   .../platform/mediatek/jpeg/mtk_jpeg_core.c    |  6 ++++
> >   .../platform/mediatek/jpeg/mtk_jpeg_core.h    | 11 +++++++
> >   .../platform/mediatek/jpeg/mtk_jpeg_dec_hw.c  | 30
> > +++++++++++++++++--
> >   .../platform/mediatek/jpeg/mtk_jpeg_dec_hw.h  |  4 +++
> >   .../platform/mediatek/jpeg/mtk_jpeg_enc_hw.c  | 26
> > ++++++++++++++++
> >   .../platform/mediatek/jpeg/mtk_jpeg_enc_hw.h  |  4 +++
> >   6 files changed, 78 insertions(+), 3 deletions(-)
> > 
> > diff --git a/drivers/media/platform/mediatek/jpeg/mtk_jpeg_core.c
> > b/drivers/media/platform/mediatek/jpeg/mtk_jpeg_core.c
> > index c3ccc525d9fd..77b3bd6c4d3f 100644
> > --- a/drivers/media/platform/mediatek/jpeg/mtk_jpeg_core.c
> > +++ b/drivers/media/platform/mediatek/jpeg/mtk_jpeg_core.c
> > @@ -1655,6 +1655,9 @@ static void mtk_jpegenc_worker(struct
> > work_struct *work)
> >       jpeg_dst_buf->frame_num = ctx->total_frame_num;
> >       ctx->total_frame_num++;
> >       mtk_jpeg_enc_reset(comp_jpeg[hw_id]->reg_base);
> > +#if IS_ENABLED(CONFIG_ARM_SMMU_V3)
> > +     mtk_jpeg_enc_set_smmu_sid(hw_id);
> > +#endif
> >       mtk_jpeg_set_enc_dst(ctx,
> >                            comp_jpeg[hw_id]->reg_base,
> >                            &dst_buf->vb2_buf);
> > @@ -1771,6 +1774,9 @@ static void mtk_jpegdec_worker(struct
> > work_struct *work)
> >       spin_lock_irqsave(&comp_jpeg[hw_id]->hw_lock, flags);
> >       ctx->total_frame_num++;
> >       mtk_jpeg_dec_reset(comp_jpeg[hw_id]->reg_base);
> > +#if IS_ENABLED(CONFIG_ARM_SMMU_V3)
> 
> You can avoid using preprocessor conditionals - and then, this
> doesn't look like an
> ARM SMMUv3 configuration, but rather a JPEG dec/enc HW config, so in
> that case the
> enclosing of this in the proposed config option would even be wrong.
> 
> Use platform data for that.
> 
> > +     mtk_jpeg_dec_set_smmu_sid(hw_id);
> > +#endif
> >       mtk_jpeg_dec_set_config(comp_jpeg[hw_id]->reg_base,
> >                               jpeg->variant->support_34bit,
> >                               &jpeg_src_buf->dec_param,
> > diff --git a/drivers/media/platform/mediatek/jpeg/mtk_jpeg_core.h
> > b/drivers/media/platform/mediatek/jpeg/mtk_jpeg_core.h
> > index 8fddc133c46c..d3aba1e6cae8 100644
> > --- a/drivers/media/platform/mediatek/jpeg/mtk_jpeg_core.h
> > +++ b/drivers/media/platform/mediatek/jpeg/mtk_jpeg_core.h
> > @@ -36,6 +36,17 @@
> > 
> >   #define MTK_JPEG_ADDR_MASK GENMASK(1, 0)
> > 
> > +#if IS_ENABLED(CONFIG_ARM_SMMU_V3)
> > +#define JPG_REG_CORE0_GUSER_ID                          0x380d0000
> > +#define JPG_REG_CORE1_GUSER_ID                          0x388d0000
> 
> At least these two definitions shall go in the devicetree reg node.
> 
> > +#define JPG_REG_GUSER_ID_MASK                           0x7
> > +#define JPG_REG_GUSER_ID_DEC_SID                        0x4
> > +#define JPG_REG_GUSER_ID_ENC_SID                        0x5
> > +#define JPG_REG_DEC_GUSER_ID_SHIFT                      8
> > +#define JPG_REG_ENC_GUSER_ID_SHIFT                      4
> 
> If this is setting an IOMMU SID, then you can just use the "iommus"
> property
> to pass a handle to the IOMMU that this device is using plus the
> streamid,
> which you can retrieve and write to the guser_id_{dec,enc}_sid
> register.
> 
> There's no reason to hardcode that in this header, and actually
> hardcoding
> will give you a number of issues (example: unpowered/unclocked access
> to the
> IOMMU, and many others).
> 
> > +#define GUSER_ID_MAPRANGE                               4
> > +#endif
> > +
> >   /**
> >    * enum mtk_jpeg_ctx_state - states of the context state machine
> >    * @MTK_JPEG_INIT:          current state is initialized
> > diff --git a/drivers/media/platform/mediatek/jpeg/mtk_jpeg_dec_hw.c
> > b/drivers/media/platform/mediatek/jpeg/mtk_jpeg_dec_hw.c
> > index d868e46aaf37..fadfc4b5e366 100644
> > --- a/drivers/media/platform/mediatek/jpeg/mtk_jpeg_dec_hw.c
> > +++ b/drivers/media/platform/mediatek/jpeg/mtk_jpeg_dec_hw.c
> > @@ -274,6 +274,32 @@ void mtk_jpeg_dec_reset(void __iomem *base)
> >   }
> >   EXPORT_SYMBOL_GPL(mtk_jpeg_dec_reset);
> > 
> > +#if IS_ENABLED(CONFIG_ARM_SMMU_V3)
> > +void mtk_jpeg_dec_set_smmu_sid(int hwid)
> > +{
> > +     void __iomem *dec_reg_base;
> > +     u32 val, mask;
> > +
> > +     if (hwid)
> > +             dec_reg_base = ioremap(JPG_REG_CORE1_GUSER_ID,
> > GUSER_ID_MAPRANGE);
> > +     else
> > +             dec_reg_base = ioremap(JPG_REG_CORE0_GUSER_ID,
> > GUSER_ID_MAPRANGE);
> > +     if (!dec_reg_base) {
> > +             dev_err(jpeg->dev, "Failed to map jpgdec
> > JPG_REG_GUSER_ID\n");
> > +             return;
> > +     }
> > +
> > +     val = ioread32(dec_reg_base);
> > +     mask = ~(JPG_REG_GUSER_ID_MASK <<
> > JPG_REG_DEC_GUSER_ID_SHIFT);
> > +     val &= mask;
> > +     val |= (JPG_REG_GUSER_ID_DEC_SID <<
> > JPG_REG_DEC_GUSER_ID_SHIFT);
> > +
> > +     iowrite32(val, dec_reg_base);
> > +     iounmap(dec_reg_base);
> > +}
> > +EXPORT_SYMBOL_GPL(mtk_jpeg_dec_set_smmu_sid);
> > +#endif
> > +
> >   static void mtk_jpeg_dec_set_brz_factor(void __iomem *base, u8
> > yscale_w,
> >                               u8 yscale_h, u8 uvscale_w, u8
> > uvscale_h)
> >   {
> > @@ -552,7 +578,6 @@ static irqreturn_t
> > mtk_jpegdec_hw_irq_handler(int irq, void *priv)
> >       struct vb2_v4l2_buffer *src_buf, *dst_buf;
> >       struct mtk_jpeg_src_buf *jpeg_src_buf;
> >       enum vb2_buffer_state buf_state;
> > -     struct mtk_jpeg_ctx *ctx;
> >       u32 dec_irq_ret;
> >       u32 irq_status;
> >       int i;
> > @@ -562,7 +587,6 @@ static irqreturn_t
> > mtk_jpegdec_hw_irq_handler(int irq, void *priv)
> > 
> >       cancel_delayed_work(&jpeg->job_timeout_work);
> > 
> > -     ctx = jpeg->hw_param.curr_ctx;
> >       src_buf = jpeg->hw_param.src_buffer;
> >       dst_buf = jpeg->hw_param.dst_buffer;
> >       v4l2_m2m_buf_copy_metadata(src_buf, dst_buf, true);
> > @@ -585,7 +609,7 @@ static irqreturn_t
> > mtk_jpegdec_hw_irq_handler(int irq, void *priv)
> >       buf_state = VB2_BUF_STATE_DONE;
> >       v4l2_m2m_buf_done(src_buf, buf_state);
> >       mtk_jpegdec_put_buf(jpeg);
> > -     pm_runtime_put(ctx->jpeg->dev);
> > +     pm_runtime_put(jpeg->dev);
> 
> You're doing more than what you're describing in the commit title and
> description.
> 
> If this change was intentional, please move it to a diffrent commit.
> 
> Regards,
> Angelo

Dear Angelo,

Thanks for your comments, let's have a summary for them:
1. add smmu config enalbing flag in platform data.
2. move the hw smmu setting to devicetree and get it in probe func.
3. refine the patch.

I will fix ithem.

Thanks.

Regards,
Kyrie.

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ