[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20250416095402.90543-8-linux@fw-web.de>
Date: Wed, 16 Apr 2025 11:53:59 +0200
From: Frank Wunderlich <linux@...web.de>
To: Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>,
Lee Jones <lee@...nel.org>,
Chunfeng Yun <chunfeng.yun@...iatek.com>,
Vinod Koul <vkoul@...nel.org>,
Kishon Vijay Abraham I <kishon@...nel.org>,
Matthias Brugger <matthias.bgg@...il.com>,
AngeloGioacchino Del Regno <angelogioacchino.delregno@...labora.com>
Cc: Frank Wunderlich <frank-w@...lic-files.de>,
Rafał Miłecki <rafal@...ecki.pl>,
Daniel Golle <daniel@...rotopia.org>,
Sean Wang <sean.wang@...iatek.com>,
devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org,
linux-mediatek@...ts.infradead.org,
linux-phy@...ts.infradead.org
Subject: [PATCH v3 7/8] arm64: dts: mediatek: mt7988: Add xsphy for ssusb0/pcie2
From: Frank Wunderlich <frank-w@...lic-files.de>
First usb and third pcie controller on mt7988 need a xs-phy to work
properly.
Signed-off-by: Frank Wunderlich <frank-w@...lic-files.de>
---
v3:
- drop unneeded properties and compatibles from topmisc
- xsphy unit name not changed because binding requires this name (not only phy)
- also not changed port names to be clear abour which phy is used (mt7988 also have tphy)
- change offset to have clean syscon (without power controller)
---
arch/arm64/boot/dts/mediatek/mt7988a.dtsi | 36 +++++++++++++++++++++++
1 file changed, 36 insertions(+)
diff --git a/arch/arm64/boot/dts/mediatek/mt7988a.dtsi b/arch/arm64/boot/dts/mediatek/mt7988a.dtsi
index 88b56a24efca..72792f4ccde3 100644
--- a/arch/arm64/boot/dts/mediatek/mt7988a.dtsi
+++ b/arch/arm64/boot/dts/mediatek/mt7988a.dtsi
@@ -334,6 +334,8 @@ usb@...90000 {
<&infracfg CLK_INFRA_133M_USB_HCK>,
<&infracfg CLK_INFRA_USB_XHCI>;
clock-names = "sys_ck", "ref_ck", "mcu_ck", "dma_ck", "xhci_ck";
+ phys = <&xphyu2port0 PHY_TYPE_USB2>,
+ <&xphyu3port0 PHY_TYPE_USB3>;
status = "disabled";
};
@@ -398,6 +400,9 @@ pcie2: pcie@...80000 {
pinctrl-0 = <&pcie2_pins>;
status = "disabled";
+ phys = <&xphyu3port0 PHY_TYPE_PCIE>;
+ phy-names = "pcie-phy";
+
#interrupt-cells = <1>;
interrupt-map-mask = <0 0 0 0x7>;
interrupt-map = <0 0 0 1 &pcie_intc2 0>,
@@ -548,6 +553,37 @@ tphyu3port0: usb-phy@...50700 {
};
};
+
+ topmisc: system-controller@...10000 {
+ compatible = "mediatek,mt7988-topmisc",
+ "syscon";
+ reg = <0 0x11d10084 0 0xff80>;
+ };
+
+ xs-phy@...10000 {
+ compatible = "mediatek,mt7988-xsphy",
+ "mediatek,xsphy";
+ #address-cells = <2>;
+ #size-cells = <2>;
+ ranges;
+ status = "disabled";
+
+ xphyu2port0: usb-phy@...10000 {
+ reg = <0 0x11e10000 0 0x400>;
+ clocks = <&infracfg CLK_INFRA_USB_UTMI>;
+ clock-names = "ref";
+ #phy-cells = <1>;
+ };
+
+ xphyu3port0: usb-phy@...13000 {
+ reg = <0 0x11e13400 0 0x500>;
+ clocks = <&infracfg CLK_INFRA_USB_PIPE>;
+ clock-names = "ref";
+ #phy-cells = <1>;
+ mediatek,syscon-type = <&topmisc 0x194 0>;
+ };
+ };
+
clock-controller@...40000 {
compatible = "mediatek,mt7988-xfi-pll";
reg = <0 0x11f40000 0 0x1000>;
--
2.43.0
Powered by blists - more mailing lists