[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20250423162523.2060405-1-arnd@kernel.org>
Date: Wed, 23 Apr 2025 18:25:16 +0200
From: Arnd Bergmann <arnd@...nel.org>
To: Lorenzo Pieralisi <lpieralisi@...nel.org>,
Krzysztof Wilczyński <kw@...ux.com>,
Manivannan Sadhasivam <manivannan.sadhasivam@...aro.org>,
Bjorn Helgaas <bhelgaas@...gle.com>,
Vignesh Raghavendra <vigneshr@...com>
Cc: Arnd Bergmann <arnd@...db.de>,
Rob Herring <robh@...nel.org>,
Siddharth Vadapalli <s-vadapalli@...com>,
Kishon Vijay Abraham I <kishon@...nel.org>,
Thomas Richard <thomas.richard@...tlin.com>,
Théo Lebrun <theo.lebrun@...tlin.com>,
Sergio Paracuellos <sergio.paracuellos@...il.com>,
linux-pci@...r.kernel.org,
linux-kernel@...r.kernel.org,
linux-omap@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org
Subject: [PATCH] pci: j721e: fix host/endpoint dependencies
From: Arnd Bergmann <arnd@...db.de>
The j721e driver has a single platform driver that can be built-in or
a loadable module, but it calls two separate backend drivers depending
on whether it is a host or endpoint.
If the two modes are not the same, we can end up with a situation where
the built-in pci-j721e driver tries to call the modular host or endpoint
driver, which causes a link failure:
ld.lld-21: error: undefined symbol: cdns_pcie_ep_setup
>>> referenced by pci-j721e.c
>>> drivers/pci/controller/cadence/pci-j721e.o:(j721e_pcie_probe) in archive vmlinux.a
ld.lld-21: error: undefined symbol: cdns_pcie_host_setup
>>> referenced by pci-j721e.c
>>> drivers/pci/controller/cadence/pci-j721e.o:(j721e_pcie_probe) in archive vmlinux.a
Rework the dependencies so that the 'select' is done by the common
Kconfig symbol, based on which of the two are enabled. Effectively
this means that having one built-in makes the other either built-in
or disabled, but all configurations will now build.
Signed-off-by: Arnd Bergmann <arnd@...db.de>
---
drivers/pci/controller/cadence/Kconfig | 4 ++--
drivers/pci/controller/cadence/pci-j721e.c | 4 ++--
2 files changed, 4 insertions(+), 4 deletions(-)
diff --git a/drivers/pci/controller/cadence/Kconfig b/drivers/pci/controller/cadence/Kconfig
index 72d7d264d6c3..666e16b6367f 100644
--- a/drivers/pci/controller/cadence/Kconfig
+++ b/drivers/pci/controller/cadence/Kconfig
@@ -44,12 +44,13 @@ config PCIE_CADENCE_PLAT_EP
config PCI_J721E
tristate
+ select PCIE_CADENCE_HOST if PCI_J721E_HOST != n
+ select PCIE_CADENCE_EP if PCI_J721E_EP != n
config PCI_J721E_HOST
tristate "TI J721E PCIe controller (host mode)"
depends on ARCH_K3 || COMPILE_TEST
depends on OF
- select PCIE_CADENCE_HOST
select PCI_J721E
help
Say Y here if you want to support the TI J721E PCIe platform
@@ -61,7 +62,6 @@ config PCI_J721E_EP
depends on ARCH_K3 || COMPILE_TEST
depends on OF
depends on PCI_ENDPOINT
- select PCIE_CADENCE_EP
select PCI_J721E
help
Say Y here if you want to support the TI J721E PCIe platform
diff --git a/drivers/pci/controller/cadence/pci-j721e.c b/drivers/pci/controller/cadence/pci-j721e.c
index b87bc26bbf06..f0051805f9e9 100644
--- a/drivers/pci/controller/cadence/pci-j721e.c
+++ b/drivers/pci/controller/cadence/pci-j721e.c
@@ -475,7 +475,7 @@ static int j721e_pcie_probe(struct platform_device *pdev)
switch (mode) {
case PCI_MODE_RC:
- if (!IS_ENABLED(CONFIG_PCIE_CADENCE_HOST))
+ if (!IS_ENABLED(CONFIG_PCI_J721E_HOST))
return -ENODEV;
bridge = devm_pci_alloc_host_bridge(dev, sizeof(*rc));
@@ -494,7 +494,7 @@ static int j721e_pcie_probe(struct platform_device *pdev)
pcie->cdns_pcie = cdns_pcie;
break;
case PCI_MODE_EP:
- if (!IS_ENABLED(CONFIG_PCIE_CADENCE_EP))
+ if (!IS_ENABLED(CONFIG_PCI_J721E_EP))
return -ENODEV;
ep = devm_kzalloc(dev, sizeof(*ep), GFP_KERNEL);
--
2.39.5
Powered by blists - more mailing lists