[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20250424032417-GYA47799@gentoo>
Date: Thu, 24 Apr 2025 03:24:17 +0000
From: Yixun Lan <dlan@...too.org>
To: Andre Przywara <andre.przywara@....com>
Cc: Rob Herring <robh@...nel.org>, Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>, Chen-Yu Tsai <wens@...e.org>,
Jernej Skrabec <jernej.skrabec@...il.com>,
Samuel Holland <samuel@...lland.org>,
Maxime Ripard <mripard@...nel.org>,
Andrew Lunn <andrew+netdev@...n.ch>,
"David S. Miller" <davem@...emloft.net>,
Eric Dumazet <edumazet@...gle.com>,
Jakub Kicinski <kuba@...nel.org>, Paolo Abeni <pabeni@...hat.com>,
devicetree@...r.kernel.org, linux-arm-kernel@...ts.infradead.org,
linux-sunxi@...ts.linux.dev, linux-kernel@...r.kernel.org,
netdev@...r.kernel.org
Subject: Re: [PATCH 4/5] arm64: dts: allwinner: a527: add EMAC0 to Radxa A5E
board
Hi Andre,
On 01:43 Thu 24 Apr , Andre Przywara wrote:
> On Wed, 23 Apr 2025 22:03:25 +0800
> Yixun Lan <dlan@...too.org> wrote:
>
> Hi Yixun,
>
> > On Radxa A5E board, the EMAC0 connect to an external YT8531C PHY,
> > which features a 25MHz crystal, and using PH8 pin as PHY reset.
> >
> > Tested on A5E board with schematic V1.20.
>
> Can you please add a name to the /aliases node, to make U-Boot add a
> MAC address?
> ethernet0 = &emac0;
>
> >
> > Signed-off-by: Yixun Lan <dlan@...too.org>
> > ---
> > arch/arm64/boot/dts/allwinner/sun55i-a527-radxa-a5e.dts | 17 +++++++++++++++++
> > 1 file changed, 17 insertions(+)
> >
> > diff --git a/arch/arm64/boot/dts/allwinner/sun55i-a527-radxa-a5e.dts b/arch/arm64/boot/dts/allwinner/sun55i-a527-radxa-a5e.dts
> > index 912e1bda974ce5f64c425e371357b1a78b7c13dd..b3399a28badb5172801e47b8a45d5b753fc56ef1 100644
> > --- a/arch/arm64/boot/dts/allwinner/sun55i-a527-radxa-a5e.dts
> > +++ b/arch/arm64/boot/dts/allwinner/sun55i-a527-radxa-a5e.dts
> > @@ -54,6 +54,23 @@ &ehci1 {
> > status = "okay";
> > };
> >
> > +&emac0 {
> > + phy-mode = "rgmii";
> > + phy-handle = <&ext_rgmii_phy>;
>
> Can you please add the phy-supply here, which should be CLDO3? It's
> referenced by other nodes, so would be enabled already,but each node
> should be self-contained.
right, I was about to check and then forgot.. will add it back next version
--
Yixun Lan (dlan)
Powered by blists - more mailing lists