| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20250425132727.5160-4-linux.amoon@gmail.com>
Date: Fri, 25 Apr 2025 18:56:23 +0530
From: Anand Moon <linux.amoon@...il.com>
To: Chanwoo Choi <cw00.choi@...sung.com>,
Krzysztof Kozlowski <krzk@...nel.org>,
Michael Turquette <mturquette@...libre.com>,
Stephen Boyd <sboyd@...nel.org>,
Rob Herring <robh@...nel.org>,
Conor Dooley <conor+dt@...nel.org>,
Alim Akhtar <alim.akhtar@...sung.com>,
linux-kernel@...r.kernel.org (open list:MAXIM PMIC AND MUIC DRIVERS FOR EXYNOS BASED BO...),
linux-clk@...r.kernel.org (open list:COMMON CLK FRAMEWORK),
devicetree@...r.kernel.org (open list:OPEN FIRMWARE AND FLATTENED DEVICE TREE BINDINGS),
linux-arm-kernel@...ts.infradead.org (moderated list:ARM/SAMSUNG S3C, S5P AND EXYNOS ARM ARCHITECTURES),
linux-samsung-soc@...r.kernel.org (open list:ARM/SAMSUNG S3C, S5P AND EXYNOS ARM ARCHITECTURES)
Cc: Anand Moon <linux.amoon@...il.com>
Subject: [PATCH v1 03/10] ARM: dts: exynos: Add proper regulator states for suspend-to-mem for Exynos4412 Odroid
MAX77686 PMCI is able to power down and up key core supplies and other
voltage rails via PWRREQ signal to enter / exit (deep) sleep mode.
PWRREQ status is ignored during initial power up and down processes.
All programming must be done before the AP enterns the sleep mode by
pulling PWRREQ low since the AP does not have programming capability
in (deep) sleep mode.
Add suspend-to-mem node to regulator core to be enabled or disabled
during system suspend and also support changing the regulator operating
mode during runtime and when the system enter sleep mode (stand by mode).
Regulators which can be turned off during system suspend:
-LDOn : 2, 6-8, 10-12, 14-16,
-BUCKn : 1-4.
Use standard regulator bindings for it ('regulator-off-in-suspend').
Signed-off-by: Anand Moon <linux.amoon@...il.com>
---
.../dts/samsung/exynos4412-odroid-common.dtsi | 56 +++++++++++++++++++
1 file changed, 56 insertions(+)
diff --git a/arch/arm/boot/dts/samsung/exynos4412-odroid-common.dtsi b/arch/arm/boot/dts/samsung/exynos4412-odroid-common.dtsi
index 03943c666d11..3837e038c266 100644
--- a/arch/arm/boot/dts/samsung/exynos4412-odroid-common.dtsi
+++ b/arch/arm/boot/dts/samsung/exynos4412-odroid-common.dtsi
@@ -309,6 +309,10 @@ ldo2_reg: LDO2 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
};
ldo3_reg: LDO3 {
@@ -338,6 +342,10 @@ ldo6_reg: LDO6 {
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
regulator-always-on;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
};
ldo7_reg: LDO7 {
@@ -345,18 +353,30 @@ ldo7_reg: LDO7 {
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
regulator-always-on;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
};
ldo8_reg: LDO8 {
regulator-name = "VDD10_HDMI_1.0V";
regulator-min-microvolt = <1000000>;
regulator-max-microvolt = <1000000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
};
ldo10_reg: LDO10 {
regulator-name = "VDDQ_MIPIHSI_1.8V";
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
};
ldo11_reg: LDO11 {
@@ -364,6 +384,10 @@ ldo11_reg: LDO11 {
regulator-min-microvolt = <1800000>;
regulator-max-microvolt = <1800000>;
regulator-always-on;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
};
ldo12_reg: LDO12 {
@@ -372,6 +396,10 @@ ldo12_reg: LDO12 {
regulator-max-microvolt = <3300000>;
regulator-always-on;
regulator-boot-on;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
};
ldo13_reg: LDO13 {
@@ -388,6 +416,10 @@ ldo14_reg: LDO14 {
regulator-max-microvolt = <1800000>;
regulator-always-on;
regulator-boot-on;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
};
ldo15_reg: LDO15 {
@@ -396,6 +428,10 @@ ldo15_reg: LDO15 {
regulator-max-microvolt = <1000000>;
regulator-always-on;
regulator-boot-on;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
};
ldo16_reg: LDO16 {
@@ -404,6 +440,10 @@ ldo16_reg: LDO16 {
regulator-max-microvolt = <1800000>;
regulator-always-on;
regulator-boot-on;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
};
ldo20_reg: LDO20 {
@@ -442,6 +482,10 @@ buck1_reg: BUCK1 {
regulator-max-microvolt = <1100000>;
regulator-always-on;
regulator-boot-on;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
};
buck2_reg: BUCK2 {
@@ -450,6 +494,10 @@ buck2_reg: BUCK2 {
regulator-max-microvolt = <1350000>;
regulator-always-on;
regulator-boot-on;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
};
buck3_reg: BUCK3 {
@@ -458,6 +506,10 @@ buck3_reg: BUCK3 {
regulator-max-microvolt = <1050000>;
regulator-always-on;
regulator-boot-on;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
};
buck4_reg: BUCK4 {
@@ -465,6 +517,10 @@ buck4_reg: BUCK4 {
regulator-min-microvolt = <900000>;
regulator-max-microvolt = <1100000>;
regulator-microvolt-offset = <50000>;
+
+ regulator-state-mem {
+ regulator-off-in-suspend;
+ };
};
buck5_reg: BUCK5 {
--
2.49.0
Powered by blists - more mailing lists