[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <921b4a1e-caed-47a2-b5ed-d78cf67c5757@lunn.ch>
Date: Fri, 25 Apr 2025 23:15:05 +0200
From: Andrew Lunn <andrew@...n.ch>
To: george.moussalem@...look.com
Cc: Vladimir Oltean <olteanv@...il.com>,
"David S. Miller" <davem@...emloft.net>,
Eric Dumazet <edumazet@...gle.com>,
Jakub Kicinski <kuba@...nel.org>, Paolo Abeni <pabeni@...hat.com>,
netdev@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH v2] net: dsa: qca8k: fix led devicename when using
external mdio bus
On Fri, Apr 25, 2025 at 01:19:28PM +0400, George Moussalem via B4 Relay wrote:
> From: George Moussalem <george.moussalem@...look.com>
>
> The qca8k dsa switch can use either an external or internal mdio bus.
> This depends on whether the mdio node is defined under the switch node
> itself and, as such, the internal_mdio_mask is populated with its
> internal phys. Upon registering the internal mdio bus, the slave_mii_bus
> of the dsa switch is assigned to this bus. When an external mdio bus is
> used, it is left unassigned, though its id is used to create the device
> names of the leds.
> This leads to the leds being named '(efault):00:green:lan' and so on as
> the slave_mii_bus is null. So let's fix this by adding a null check and
> use the devicename of the external bus instead when an external bus is
> configured.
>
> Signed-off-by: George Moussalem <george.moussalem@...look.com>
Before merging this, i think we need to finish the discussion here:
https://patchwork.kernel.org/project/netdevbpf/patch/20250425151309.30493-1-kabel@kernel.org/
It might be the whole internal/external bus is going away...
Andrew
---
pw-bot: cr
Powered by blists - more mailing lists