lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <20250502103101.957016-1-e@freeshell.de>
Date: Fri,  2 May 2025 03:30:40 -0700
From: E Shattow <e@...eshell.de>
To: Paul Walmsley <paul.walmsley@...ive.com>,
	Palmer Dabbelt <palmer@...belt.com>,
	Albert Ou <aou@...s.berkeley.edu>,
	Alexandre Ghiti <alex@...ti.fr>
Cc: linux-kernel@...r.kernel.org,
	devicetree@...r.kernel.org,
	linux-riscv@...ts.infradead.org,
	E Shattow <e@...eshell.de>
Subject: [PATCH v3 0/4] riscv: dts: starfive: jh7110-common: Sync downstream U-Boot changes

U-Boot boot loader has adopted using the Linux dt-rebasing tree for dts
with StarFive VisionFive2 board target (and related JH7110 common boards).
Sync the minimum changes from jh7110-common.dtsi needed for boot so these
can be dropped from U-Boot.

Changes since v2:

- 1/5 -> 1/4: Do not replace assigned CPU core or PLL0 clock when adding new
  assignments. Adjust patch name and commit message accordingly.
- 2/5 -> 2/4: Detail reason for qspi setting changes in commit message
- 3/5 -> Drop uart0 clock-frequency patch
- 4/5 -> 3/4: Add reviewed by tag (no change)
- 5/5 -> 4/4: Follow dts coding style sort order. Add bootph-pre-ram hint
  for mmc interfaces

Note: mmc boot source modes of JH7110 loader on mask ROM are deprecated as
of StarFive JH7110 User Guide 1.2 revision. The loader expects data within
range of LBA 0 and LBA 1 in conflict with GUID Partition Table.

SD Card and eMMC boot media are prepared as follows:

# GPT partition SD Card or eMMC as
# 1: Secondary Program Loader @ 0x200000
# 2: Main payload area for use by SPL
# 3: EFI System Partition
sgdisk --clear \
  --new=1:2M:+2M --typecode=1:2E54B353-1271-4842-806F-E436D6AF6985 \
  --new=2:4M:+4M --typecode=2:5B193300-FC78-40CD-8002-E86C45580B47 \
  --new=3:8M:+100M --typecode=3:EF00 /dev/sdX

# Write offset value in bytes of loader 'backup section' SPL as part1 @ 2M
python3 <<-EOF
with open("/dev/sdX", "r+b") as f:
  f.seek(0x0004)
  f.write((0x200000).to_bytes(4, "little"))
EOF

# Write invalid CRC to trigger 'Main section boot fail,use backup section'
python3 <<-EOF
with open("/dev/sdX", "r+b") as f:
  f.seek(0x0290)
  f.write((0x5A5A5A5A).to_bytes(4, "little"))
EOF

E Shattow (4):
  riscv: dts: starfive: jh7110-common: add CPU BUS PERH QSPI clocks to
    syscrg
  riscv: dts: starfive: jh7110-common: qspi flash setting read-delay 2
    cycles max 100MHz
  riscv: dts: starfive: jh7110-common: add eeprom node to i2c5
  riscv: dts: starfive: jh7110-common: bootph-pre-ram hinting needed by
    boot loader

 .../boot/dts/starfive/jh7110-common.dtsi      | 31 ++++++++++++++++---
 1 file changed, 27 insertions(+), 4 deletions(-)


base-commit: ebd297a2affadb6f6f4d2e5d975c1eda18ac762d
-- 
2.49.0


Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ