[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <87d38b3d-607d-45c3-8f29-70f6c01187db@ti.com>
Date: Fri, 2 May 2025 16:43:37 +0530
From: "Donadkar, Rishikesh" <r-donadkar@...com>
To: Devarsh Thakkar <devarsht@...com>, <nm@...com>, <vigneshr@...com>
CC: <kristo@...nel.org>, <robh@...nel.org>, <krzk+dt@...nel.org>,
<conor+dt@...nel.org>, <vaishnav.a@...com>, <y-abhilashchandra@...com>,
<s-jain1@...com>, <jai.luthra@...ux.dev>,
<jai.luthra@...asonboard.com>, <linux-arm-kernel@...ts.infradead.org>,
<devicetree@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
<imx@...ts.linux.dev>
Subject: Re: [PATCH v1 4/4] arm64: dts: ti: k3-am62x: Add required voltage
supplies for TEVI-OV5640
On 02-05-2025 14:37, Devarsh Thakkar wrote:
>
> On 29/04/25 21:11, Rishikesh Donadkar wrote:
>> The device tree overlay for TEVI-OV5640 requires following voltage
>> supplies:
>>
>> AVDD-supply: Analog voltage supply, 2.8 volts
>> DOVDD-supply: Digital I/O voltage supply, 1.8 volts
>> DVDD-supply: Digital core voltage supply, 1.5 volts
>>
> I think this contradicts the voltage mentioned in TEVI-OV56540 doc [1]
> which mention digital voltage as 3.3 volts ?
Thank you for pointing out, I will fix it.
>
>> Add them in the DT overlay.
>>
> [1]:
> https://www.technexion.com/wp-content/uploads/2023/09/product-brief_tevi-ov5640.pdf
>
> Regards
> Devarsh
>> Signed-off-by: Rishikesh Donadkar <r-donadkar@...com>
>> ---
>> .../dts/ti/k3-am62x-sk-csi2-tevi-ov5640.dtso | 32 +++++++++++++++++++
>> 1 file changed, 32 insertions(+)
>>
>> diff --git a/arch/arm64/boot/dts/ti/k3-am62x-sk-csi2-tevi-ov5640.dtso b/arch/arm64/boot/dts/ti/k3-am62x-sk-csi2-tevi-ov5640.dtso
>> index b6bfdfbbdd984..123ab0e5e8dfa 100644
>> --- a/arch/arm64/boot/dts/ti/k3-am62x-sk-csi2-tevi-ov5640.dtso
>> +++ b/arch/arm64/boot/dts/ti/k3-am62x-sk-csi2-tevi-ov5640.dtso
>> @@ -15,6 +15,33 @@ clk_ov5640_fixed: ov5640-xclk {
>> #clock-cells = <0>;
>> clock-frequency = <24000000>;
>> };
>> +
>> + reg_2p8v: regulator-2p8v {
>> + compatible = "regulator-fixed";
>> + regulator-name = "2P8V";
>> + regulator-min-microvolt = <2800000>;
>> + regulator-max-microvolt = <2800000>;
>> + vin-supply = <&vcc_3v3_sys>;
>> + regulator-always-on;
>> + };
>> +
>> + reg_1p8v: regulator-1p8v {
>> + compatible = "regulator-fixed";
>> + regulator-name = "1P8V";
>> + regulator-min-microvolt = <1800000>;
>> + regulator-max-microvolt = <1800000>;
>> + vin-supply = <&vcc_3v3_sys>;
>> + regulator-always-on;
>> + };
>> +
>> + reg_1p5v: regulator-1p5v {
>> + compatible = "regulator-fixed";
>> + regulator-name = "1P5V";
>> + regulator-min-microvolt = <1500000>;
>> + regulator-max-microvolt = <1500000>;
>> + vin-supply = <&vcc_3v3_sys>;
>> + regulator-always-on;
>> + };
>> };
>>
>> &main_i2c2 {
>> @@ -40,6 +67,11 @@ ov5640: camera@3c {
>>
>> clocks = <&clk_ov5640_fixed>;
>> clock-names = "xclk";
>> +
>> + AVDD-supply = <®_2p8v>;
>> + DOVDD-supply = <®_1p8v>;
>> + DVDD-supply = <®_1p5v>;
>> +
>> powerdown-gpios = <&exp1 13 GPIO_ACTIVE_LOW>;
>>
>> port {
Powered by blists - more mailing lists