[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20250503152917.138648-3-didi.debian@cknow.org>
Date: Sat, 3 May 2025 17:22:19 +0200
From: Diederik de Haas <didi.debian@...ow.org>
To: Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>,
Heiko Stuebner <heiko@...ech.de>
Cc: devicetree@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org,
linux-rockchip@...ts.infradead.org,
linux-kernel@...r.kernel.org,
Dragan Simic <dsimic@...jaro.org>,
Vasily Khoruzhick <anarsoul@...il.com>,
Tianling Shen <cnsztl@...il.com>,
Diederik de Haas <didi.debian@...ow.org>
Subject: [PATCH 2/2] arm64: dts: rockchip: Add vcc-supply to SPI flash on rk3566-quartz64-b
The Quartz64 Model B has a Winbound 25Q64DWZPIG SPI flash chip,
identified as 'U13' on the component placement schematic.
In the Quartz 64 Model-B Schematic from 20220124 on page 17, we can see
that the VCC connector is connected to VCCIO_FLASH and page 4 shows that
that in turn is connected to the VCCIO2 domain.
That domain uses vcc_1v8 as its power source.
This fixes the following warning:
spi-nor spi4.0: supply vcc not found, using dummy regulator
Signed-off-by: Diederik de Haas <didi.debian@...ow.org>
---
arch/arm64/boot/dts/rockchip/rk3566-quartz64-b.dts | 1 +
1 file changed, 1 insertion(+)
diff --git a/arch/arm64/boot/dts/rockchip/rk3566-quartz64-b.dts b/arch/arm64/boot/dts/rockchip/rk3566-quartz64-b.dts
index 5707321a1144..f8cf03380636 100644
--- a/arch/arm64/boot/dts/rockchip/rk3566-quartz64-b.dts
+++ b/arch/arm64/boot/dts/rockchip/rk3566-quartz64-b.dts
@@ -648,6 +648,7 @@ flash@0 {
spi-max-frequency = <24000000>;
spi-rx-bus-width = <4>;
spi-tx-bus-width = <1>;
+ vcc-supply = <&vcc_1v8>;
};
};
--
2.49.0
Powered by blists - more mailing lists