[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <aBuiLpqURnxQ1t07@a98shuttle.de>
Date: Wed, 7 May 2025 20:10:54 +0200
From: Michael Klein <michael@...sekall.de>
To: Chen-Yu Tsai <wens@...e.org>
Cc: Rob Herring <robh@...nel.org>, Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>,
Jernej Skrabec <jernej.skrabec@...il.com>,
Samuel Holland <samuel@...lland.org>, devicetree@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org, linux-sunxi@...ts.linux.dev,
linux-kernel@...r.kernel.org
Subject: Re: [PATCH] ARM: dts: bananapi: add support for PHY LEDs
On Thu, May 08, 2025 at 12:45:28AM +0900, Chen-Yu Tsai wrote:
>On Wed, May 7, 2025 at 4:56 AM Michael Klein <michael@...sekall.de> wrote:
>>
>> The Bananapi M1 has three LEDs connected to the RTL8211E ethernet PHY.
>> Add the corresponding nodes to the device tree.
>
>I see from old emails that this was supposed to be updated? And if you
>didn't, then his patch should be marked as a "RESEND", so tooling doesn't
>get confused and ignore it.
Thank you for the reminder. Yes, the commit message was supposed to be
updated. I'll follow up.
Michael
>I'll wait a couple days in case anyone else wants to take a look.
>
>ChenYu
>
>> Signed-off-by: Michael Klein <michael@...sekall.de>
>> ---
>> .../boot/dts/allwinner/sun7i-a20-bananapi.dts | 27 +++++++++++++++++++
>> 1 file changed, 27 insertions(+)
>>
>> diff --git a/arch/arm/boot/dts/allwinner/sun7i-a20-bananapi.dts b/arch/arm/boot/dts/allwinner/sun7i-a20-bananapi.dts
>> index 46ecf9db2324..d8b362c9661a 100644
>> --- a/arch/arm/boot/dts/allwinner/sun7i-a20-bananapi.dts
>> +++ b/arch/arm/boot/dts/allwinner/sun7i-a20-bananapi.dts
>> @@ -48,6 +48,7 @@
>>
>> #include <dt-bindings/gpio/gpio.h>
>> #include <dt-bindings/interrupt-controller/irq.h>
>> +#include <dt-bindings/leds/common.h>
>>
>> / {
>> model = "LeMaker Banana Pi";
>> @@ -169,6 +170,32 @@ &ir0 {
>> &gmac_mdio {
>> phy1: ethernet-phy@1 {
>> reg = <1>;
>> +
>> + leds {
>> + #address-cells = <1>;
>> + #size-cells = <0>;
>> +
>> + led@0 {
>> + reg = <0>;
>> + color = <LED_COLOR_ID_GREEN>;
>> + function = LED_FUNCTION_LAN;
>> + linux,default-trigger = "netdev";
>> + };
>> +
>> + led@1 {
>> + reg = <1>;
>> + color = <LED_COLOR_ID_AMBER>;
>> + function = LED_FUNCTION_LAN;
>> + linux,default-trigger = "netdev";
>> + };
>> +
>> + led@2 {
>> + reg = <2>;
>> + color = <LED_COLOR_ID_BLUE>;
>> + function = LED_FUNCTION_LAN;
>> + linux,default-trigger = "netdev";
>> + };
>> + };
>> };
>> };
>>
>> --
>> 2.39.5
>>
>>
>
--
Powered by blists - more mailing lists