[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20250513084322.22354mkqmwxtlpy7@skbuf>
Date: Tue, 13 May 2025 11:43:22 +0300
From: Vladimir Oltean <olteanv@...il.com>
To: Jakob Unterwurzacher <jakobunt@...il.com>
Cc: Woojung Huh <woojung.huh@...rochip.com>, UNGLinuxDriver@...rochip.com,
Andrew Lunn <andrew@...n.ch>,
"David S. Miller" <davem@...emloft.net>,
Eric Dumazet <edumazet@...gle.com>,
Jakub Kicinski <kuba@...nel.org>, Paolo Abeni <pabeni@...hat.com>,
Simon Horman <horms@...nel.org>, Marek Vasut <marex@...x.de>,
Tristram Ha <Tristram.Ha@...rochip.com>,
Florian Fainelli <f.fainelli@...il.com>,
jakob.unterwurzacher@...rry.de, stable@...r.kernel.org,
netdev@...r.kernel.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH net v2] net: dsa: microchip: linearize skb for
tail-tagging switches
On Mon, May 12, 2025 at 04:44:18PM +0200, Jakob Unterwurzacher wrote:
> The pointer arithmentic for accessing the tail tag only works
> for linear skbs.
>
> For nonlinear skbs, it reads uninitialized memory inside the
> skb headroom, essentially randomizing the tag. I have observed
> it gets set to 6 most of the time.
>
> Example where ksz9477_rcv thinks that the packet from port 1 comes from port 6
> (which does not exist for the ksz9896 that's in use), dropping the packet.
> Debug prints added by me (not included in this patch):
>
> [ 256.645337] ksz9477_rcv:323 tag0=6
> [ 256.645349] skb len=47 headroom=78 headlen=0 tailroom=0
> mac=(64,14) mac_len=14 net=(78,0) trans=78
> shinfo(txflags=0 nr_frags=1 gso(size=0 type=0 segs=0))
> csum(0x0 start=0 offset=0 ip_summed=0 complete_sw=0 valid=0 level=0)
> hash(0x0 sw=0 l4=0) proto=0x00f8 pkttype=1 iif=3
> priority=0x0 mark=0x0 alloc_cpu=0 vlan_all=0x0
> encapsulation=0 inner(proto=0x0000, mac=0, net=0, trans=0)
> [ 256.645377] dev name=end1 feat=0x0002e10200114bb3
> [ 256.645386] skb headroom: 00000000: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> [ 256.645395] skb headroom: 00000010: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> [ 256.645403] skb headroom: 00000020: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> [ 256.645411] skb headroom: 00000030: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00 00
> [ 256.645420] skb headroom: 00000040: ff ff ff ff ff ff 00 1c 19 f2 e2 db 08 06
> [ 256.645428] skb frag: 00000000: 00 01 08 00 06 04 00 01 00 1c 19 f2 e2 db 0a 02
> [ 256.645436] skb frag: 00000010: 00 83 00 00 00 00 00 00 0a 02 a0 2f 00 00 00 00
> [ 256.645444] skb frag: 00000020: 00 00 00 00 00 00 00 00 00 00 00 00 00 00 01
> [ 256.645452] ksz_common_rcv:92 dsa_conduit_find_user returned NULL
>
> Call skb_linearize before trying to access the tag.
>
> This patch fixes ksz9477_rcv which is used by the ksz9896 I have at
> hand, and also applies the same fix to ksz8795_rcv which seems to have
> the same problem.
>
> Signed-off-by: Jakob Unterwurzacher <jakob.unterwurzacher@...rry.de>
> Cc: stable@...r.kernel.org
> Fixes: 016e43a26bab ("net: dsa: ksz: Add KSZ8795 tag code")
> Fixes: 8b8010fb7876 ("dsa: add support for Microchip KSZ tail tagging)
> ---
One of the blamed commits appeared in v4.13 and the other in v5.4.
I wondered whether separate patches should have been written, so that the
bug fix for the older commit could be independently backported further.
But then I looked at https://www.kernel.org/ and it seems that the
oldest supported LTS branch is 5.4, so that's irrelevant.
Reviewed-by: Vladimir Oltean <olteanv@...il.com>
Powered by blists - more mailing lists