lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite: Windows password security audit tool. GUI, reports in PDF.
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <aCWMrJcldfrsNTQq@Z926fQmE5jqhFMgp6>
Date: Thu, 15 May 2025 06:41:48 +0000
From: Etienne Buira <etienne.buira@...e.fr>
To: Stefan Wahren <wahrenst@....net>
Cc: Florian Fainelli <florian.fainelli@...adcom.com>,
	bcm-kernel-feedback-list@...adcom.com,
	Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
	Uwe Kleine-König <u.kleine-koenig@...libre.com>,
	Etienne Buira <etienne.buira@...e.fr>,
	linux-rpi-kernel@...ts.infradead.org,
	linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH] firmware/raspberrypi: raise timeout to 3s

On Wed, May 14, 2025 at 06:20:32PM +0200, Stefan Wahren wrote:
> Hi Etienne,
> 
> Am 12.05.25 um 18:30 schrieb Etienne Buira:
../..
> Out of curiosity and because i never saw this issue, could you please 
> provide more details?
> There is nothing connected to HDMI 0 & 1 ?
> Which firmware version are you running?
> Do you use a special configuration?

Hi Stefan

There is nothing very special, hdmi0 is connected to a monitor, there's
a (independantly powered) hdd on usb3, keyboard/mouse on usb2 ports, a
Gb network wire, UART, and nothing else.

The afore-mentioned next failure is also about graphic stack (hdmi
signal is lost as soon as VC4 driver loads), i seeked for help here:
https://lists.freedesktop.org/archives/dri-devel/2025-May/505475.html
(btw, if you have a hint...).

Regards.


Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ