lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite for Android: free password hash cracker in your pocket
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <ffeb860f-5522-4130-ae47-45a6068b17ea@gmx.net>
Date: Thu, 15 May 2025 09:42:43 +0200
From: Stefan Wahren <wahrenst@....net>
To: Florian Fainelli <florian.fainelli@...adcom.com>,
 bcm-kernel-feedback-list@...adcom.com,
 Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
 Uwe Kleine-König <u.kleine-koenig@...libre.com>,
 Etienne Buira <etienne.buira@...e.fr>, linux-rpi-kernel@...ts.infradead.org,
 linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH] firmware/raspberrypi: raise timeout to 3s

Hi Etienne,

Am 15.05.25 um 08:41 schrieb Etienne Buira:
> On Wed, May 14, 2025 at 06:20:32PM +0200, Stefan Wahren wrote:
>> Hi Etienne,
>>
>> Am 12.05.25 um 18:30 schrieb Etienne Buira:
> ../..
>> Out of curiosity and because i never saw this issue, could you please
>> provide more details?
>> There is nothing connected to HDMI 0 & 1 ?
>> Which firmware version are you running?
Please provide the dmesg output, so we can extract the firmware version.
>> Do you use a special configuration?
In this case, i meant the kernel configuration. Do you use 
arm64/defconfig or arm/multi_v7_lpae_defconfig or a custom one?

Do you use U-Boot or not?
> Hi Stefan
>
> There is nothing very special, hdmi0 is connected to a monitor, there's
Did you tried to connect a different monitor? Does the timeout still occurs?

Best regards
> a (independantly powered) hdd on usb3, keyboard/mouse on usb2 ports, a
> Gb network wire, UART, and nothing else.
>
> The afore-mentioned next failure is also about graphic stack (hdmi
> signal is lost as soon as VC4 driver loads), i seeked for help here:
> https://lists.freedesktop.org/archives/dri-devel/2025-May/505475.html
> (btw, if you have a hint...).
>
> Regards.
>


Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ