lists.openwall.net   lists  /  announce  owl-users  owl-dev  john-users  john-dev  passwdqc-users  yescrypt  popa3d-users  /  oss-security  kernel-hardening  musl  sabotage  tlsify  passwords  /  crypt-dev  xvendor  /  Bugtraq  Full-Disclosure  linux-kernel  linux-netdev  linux-ext4  linux-hardening  linux-cve-announce  PHC 
Open Source and information security mailing list archives
 
Hash Suite for Android: free password hash cracker in your pocket
[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <aCW3d7tc27Awj62K@Z926fQmE5jqhFMgp6>
Date: Thu, 15 May 2025 09:44:23 +0000
From: Etienne Buira <etienne.buira@...e.fr>
To: Stefan Wahren <wahrenst@....net>
Cc: Florian Fainelli <florian.fainelli@...adcom.com>,
	bcm-kernel-feedback-list@...adcom.com,
	Greg Kroah-Hartman <gregkh@...uxfoundation.org>,
	Uwe Kleine-König <u.kleine-koenig@...libre.com>,
	Etienne Buira <etienne.buira@...e.fr>,
	linux-rpi-kernel@...ts.infradead.org,
	linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH] firmware/raspberrypi: raise timeout to 3s

Hi Stefan, and thank you for your interest.

On Thu, May 15, 2025 at 09:42:43AM +0200, Stefan Wahren wrote:
> Hi Etienne,
> 
> Am 15.05.25 um 08:41 schrieb Etienne Buira:
> > On Wed, May 14, 2025 at 06:20:32PM +0200, Stefan Wahren wrote:
> >> Hi Etienne,
> >>
> >> Am 12.05.25 um 18:30 schrieb Etienne Buira:
> > ../..
> >> Out of curiosity and because i never saw this issue, could you please
> >> provide more details?
> >> There is nothing connected to HDMI 0 & 1 ?
> >> Which firmware version are you running?
> Please provide the dmesg output, so we can extract the firmware version.

Firmware version is 2025-02-17T20:03:07, i also attach the full gzipped
dmesg, as long as a patch of extra traces used.
I did not specifically test other firmware versions for the timeout
issue (but i did for video output).

> >> Do you use a special configuration?
> In this case, i meant the kernel configuration. Do you use 
> arm64/defconfig or arm/multi_v7_lpae_defconfig or a custom one?

I use a custom one, attached.

> Do you use U-Boot or not?

No, i only use raspberry firmware/loader.

> > Hi Stefan
> >
> > There is nothing very special, hdmi0 is connected to a monitor, there's
> Did you tried to connect a different monitor? Does the timeout still occurs?

Just tried another monitor, and yes, timeout occurs without the patch.
Both monitors showed something when driven by firmware and
simple-framebuffer.

Regards.

> 
> Best regards
> > a (independantly powered) hdd on usb3, keyboard/mouse on usb2 ports, a
> > Gb network wire, UART, and nothing else.
> >
> > The afore-mentioned next failure is also about graphic stack (hdmi
> > signal is lost as soon as VC4 driver loads), i seeked for help here:
> > https://lists.freedesktop.org/archives/dri-devel/2025-May/505475.html
> > (btw, if you have a hint...).
> >
> > Regards.
> >
> 

Download attachment "config.gz" of type "application/gzip" (36657 bytes)

View attachment "extra_traces.patch" of type "text/plain" (2708 bytes)

Download attachment "dmesg.gz" of type "application/gzip" (10383 bytes)

Powered by blists - more mailing lists

Powered by Openwall GNU/*/Linux Powered by OpenVZ