| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID:
<PAXPR04MB8459139E1C6D04B3FFF1E8D8889CA@PAXPR04MB8459.eurprd04.prod.outlook.com>
Date: Mon, 19 May 2025 13:06:20 +0000
From: Peng Fan <peng.fan@....com>
To: Bough Chen <haibo.chen@....com>, Rob Herring <robh@...nel.org>, Krzysztof
Kozlowski <krzk+dt@...nel.org>, Conor Dooley <conor+dt@...nel.org>, Shawn Guo
<shawnguo@...nel.org>, Sascha Hauer <s.hauer@...gutronix.de>, Pengutronix
Kernel Team <kernel@...gutronix.de>, Fabio Estevam <festevam@...il.com>,
Stefan Agner <stefan@...er.ch>, Linus Walleij <linus.walleij@...aro.org>,
Bartosz Golaszewski <brgl@...ev.pl>
CC: "devicetree@...r.kernel.org" <devicetree@...r.kernel.org>,
"imx@...ts.linux.dev" <imx@...ts.linux.dev>,
"linux-arm-kernel@...ts.infradead.org"
<linux-arm-kernel@...ts.infradead.org>, "linux-kernel@...r.kernel.org"
<linux-kernel@...r.kernel.org>, "linux-gpio@...r.kernel.org"
<linux-gpio@...r.kernel.org>, Bough Chen <haibo.chen@....com>
Subject: RE: [PATCH v2 1/2] ARM: dts: add ngpios for vf610 compatible gpio
controllers
> Subject: [PATCH v2 1/2] ARM: dts: add ngpios for vf610 compatible
> gpio controllers
>
> After commit da5dd31efd24 ("gpio: vf610: Switch to gpio-mmio"),
> vf610 gpio driver no more use the static number 32 for gc->ngpio, user
> has a chance to config it through device tree for each port.
>
> And some gpio controllers did have less pads. So add 'ngpios' here, this
> can save some memory when request bitmap, and also show user
> more accurate information when use gpio tools.
>
> Besides, some gpio controllers have hole in the gpio ranges, so use
> 'gpio-reserved-ranges' to cover that, then the gpioinfo tool show the
> correct result.
>
> Signed-off-by: Haibo Chen <haibo.chen@....com>
> ---
> arch/arm/boot/dts/nxp/imx/imx7ulp.dtsi | 4 ++++
> arch/arm/boot/dts/nxp/vf/vfxxx.dtsi | 5 +++++
> arch/arm64/boot/dts/freescale/imx8ulp.dtsi | 3 +++
> arch/arm64/boot/dts/freescale/imx93.dtsi | 4 ++++
> arch/arm64/boot/dts/freescale/imx94.dtsi | 7 +++++++
> arch/arm64/boot/dts/freescale/imx95.dtsi | 5 +++++
arm64 and arm should be in separated patch.
Regards,
Peng.
> 6 files changed, 28 insertions(+)
>
> diff --git a/arch/arm/boot/dts/nxp/imx/imx7ulp.dtsi
> b/arch/arm/boot/dts/nxp/imx/imx7ulp.dtsi
> index
> 3c6ef7bfba60986b797bb01b843830d364c96d45..880b9a4f32b0846a
> 773dbf9ad30715c84ac2fda6 100644
> --- a/arch/arm/boot/dts/nxp/imx/imx7ulp.dtsi
> +++ b/arch/arm/boot/dts/nxp/imx/imx7ulp.dtsi
> @@ -399,6 +399,7 @@ gpio_ptc: gpio@...e0000 {
> <&pcc3 IMX7ULP_CLK_PCTLC>;
> clock-names = "gpio", "port";
> gpio-ranges = <&iomuxc1 0 0 20>;
> + ngpios = <20>;
> };
>
> gpio_ptd: gpio@...f0000 {
> @@ -413,6 +414,7 @@ gpio_ptd: gpio@...f0000 {
> <&pcc3 IMX7ULP_CLK_PCTLD>;
> clock-names = "gpio", "port";
> gpio-ranges = <&iomuxc1 0 32 12>;
> + ngpios = <12>;
> };
>
> gpio_pte: gpio@...00000 {
> @@ -427,6 +429,7 @@ gpio_pte: gpio@...00000 {
> <&pcc3 IMX7ULP_CLK_PCTLE>;
> clock-names = "gpio", "port";
> gpio-ranges = <&iomuxc1 0 64 16>;
> + ngpios = <16>;
> };
>
> gpio_ptf: gpio@...10000 {
> @@ -441,6 +444,7 @@ gpio_ptf: gpio@...10000 {
> <&pcc3 IMX7ULP_CLK_PCTLF>;
> clock-names = "gpio", "port";
> gpio-ranges = <&iomuxc1 0 96 20>;
> + ngpios = <20>;
> };
> };
>
> diff --git a/arch/arm/boot/dts/nxp/vf/vfxxx.dtsi
> b/arch/arm/boot/dts/nxp/vf/vfxxx.dtsi
> index
> 597f20be82f1ee044e14bfaf3bd05cff37a8ad39..a275821c35d41e97eb
> 2139a081ef5765d07672aa 100644
> --- a/arch/arm/boot/dts/nxp/vf/vfxxx.dtsi
> +++ b/arch/arm/boot/dts/nxp/vf/vfxxx.dtsi
> @@ -318,6 +318,7 @@ gpio0: gpio@...49000 {
> interrupt-controller;
> #interrupt-cells = <2>;
> gpio-ranges = <&iomuxc 0 0 32>;
> + ngpios = <32>;
> };
>
> gpio1: gpio@...4a000 {
> @@ -329,6 +330,7 @@ gpio1: gpio@...4a000 {
> interrupt-controller;
> #interrupt-cells = <2>;
> gpio-ranges = <&iomuxc 0 32 32>;
> + ngpios = <32>;
> };
>
> gpio2: gpio@...4b000 {
> @@ -340,6 +342,7 @@ gpio2: gpio@...4b000 {
> interrupt-controller;
> #interrupt-cells = <2>;
> gpio-ranges = <&iomuxc 0 64 32>;
> + ngpios = <32>;
> };
>
> gpio3: gpio@...4c000 {
> @@ -351,6 +354,7 @@ gpio3: gpio@...4c000 {
> interrupt-controller;
> #interrupt-cells = <2>;
> gpio-ranges = <&iomuxc 0 96 32>;
> + ngpios = <32>;
> };
>
> gpio4: gpio@...4d000 {
> @@ -362,6 +366,7 @@ gpio4: gpio@...4d000 {
> interrupt-controller;
> #interrupt-cells = <2>;
> gpio-ranges = <&iomuxc 0 128 7>;
> + ngpios = <7>;
> };
>
> anatop: anatop@...50000 {
> diff --git a/arch/arm64/boot/dts/freescale/imx8ulp.dtsi
> b/arch/arm64/boot/dts/freescale/imx8ulp.dtsi
> index
> 2562a35286c208869d11d7fb970ac84638f45088..13b01f3aa2a4950c
> 37e72e04f6bfb5995dc19178 100644
> --- a/arch/arm64/boot/dts/freescale/imx8ulp.dtsi
> +++ b/arch/arm64/boot/dts/freescale/imx8ulp.dtsi
> @@ -686,6 +686,7 @@ gpioe: gpio@...00000 {
> <&pcc4
> IMX8ULP_CLK_PCTLE>;
> clock-names = "gpio", "port";
> gpio-ranges = <&iomuxc1 0 32 24>;
> + ngpios = <24>;
> };
>
> gpiof: gpio@...10000 {
> @@ -701,6 +702,7 @@ gpiof: gpio@...10000 {
> <&pcc4
> IMX8ULP_CLK_PCTLF>;
> clock-names = "gpio", "port";
> gpio-ranges = <&iomuxc1 0 64 32>;
> + ngpios = <32>;
> };
>
> per_bridge5: bus@...00000 {
> @@ -855,6 +857,7 @@ gpiod: gpio@...00000 {
> <&pcc5 IMX8ULP_CLK_RGPIOD>;
> clock-names = "gpio", "port";
> gpio-ranges = <&iomuxc1 0 0 24>;
> + ngpios = <24>;
> };
> };
> };
> diff --git a/arch/arm64/boot/dts/freescale/imx93.dtsi
> b/arch/arm64/boot/dts/freescale/imx93.dtsi
> index
> 64cd0776b43d38219fee312baadd4665674a141e..52be83a168d9ee64
> 52a63039c89169d49b63eb60 100644
> --- a/arch/arm64/boot/dts/freescale/imx93.dtsi
> +++ b/arch/arm64/boot/dts/freescale/imx93.dtsi
> @@ -1197,6 +1197,7 @@ gpio2: gpio@...10000 {
> <&clk IMX93_CLK_GPIO2_GATE>;
> clock-names = "gpio", "port";
> gpio-ranges = <&iomuxc 0 4 30>;
> + ngpios = <30>;
> };
>
> gpio3: gpio@...20000 {
> @@ -1213,6 +1214,7 @@ gpio3: gpio@...20000 {
> clock-names = "gpio", "port";
> gpio-ranges = <&iomuxc 0 84 8>, <&iomuxc 8
> 66 18>,
> <&iomuxc 26 34 2>, <&iomuxc 28
> 0 4>;
> + ngpios = <32>;
> };
>
> gpio4: gpio@...30000 {
> @@ -1228,6 +1230,7 @@ gpio4: gpio@...30000 {
> <&clk IMX93_CLK_GPIO4_GATE>;
> clock-names = "gpio", "port";
> gpio-ranges = <&iomuxc 0 38 28>, <&iomuxc
> 28 36 2>;
> + ngpios = <30>;
> };
>
> gpio1: gpio@...00000 {
> @@ -1243,6 +1246,7 @@ gpio1: gpio@...00000 {
> <&clk IMX93_CLK_GPIO1_GATE>;
> clock-names = "gpio", "port";
> gpio-ranges = <&iomuxc 0 92 16>;
> + ngpios = <16>;
> };
>
> ocotp: efuse@...10000 {
> diff --git a/arch/arm64/boot/dts/freescale/imx94.dtsi
> b/arch/arm64/boot/dts/freescale/imx94.dtsi
> index
> 3661ea48d7d2994df7b02084e9681beb303aa133..b8ffc428e95be193
> 8bf5e73316b4163acaa04701 100644
> --- a/arch/arm64/boot/dts/freescale/imx94.dtsi
> +++ b/arch/arm64/boot/dts/freescale/imx94.dtsi
> @@ -785,6 +785,7 @@ gpio2: gpio@...10000 {
> #gpio-cells = <2>;
> gpio-controller;
> gpio-ranges = <&scmi_iomuxc 0 4 32>;
> + ngpios = <32>;
> };
>
> gpio3: gpio@...20000 {
> @@ -797,6 +798,7 @@ gpio3: gpio@...20000 {
> #gpio-cells = <2>;
> gpio-controller;
> gpio-ranges = <&scmi_iomuxc 0 36 26>;
> + ngpios = <26>;
> };
>
> gpio4: gpio@...40000 {
> @@ -810,6 +812,7 @@ gpio4: gpio@...40000 {
> gpio-controller;
> gpio-ranges = <&scmi_iomuxc 0 62 4>,
> <&scmi_iomuxc 4 0 4>,
> <&scmi_iomuxc 8 140 12>,
> <&scmi_iomuxc 20 164 12>;
> + ngpios = <32>;
> };
>
> gpio5: gpio@...50000 {
> @@ -822,6 +825,7 @@ gpio5: gpio@...50000 {
> #gpio-cells = <2>;
> gpio-controller;
> gpio-ranges = <&scmi_iomuxc 0 108 32>;
> + ngpios = <32>;
> };
>
> gpio6: gpio@...60000 {
> @@ -834,6 +838,7 @@ gpio6: gpio@...60000 {
> #gpio-cells = <2>;
> gpio-controller;
> gpio-ranges = <&scmi_iomuxc 0 66 32>;
> + ngpios = <32>;
> };
>
> gpio7: gpio@...70000 {
> @@ -846,6 +851,8 @@ gpio7: gpio@...70000 {
> #gpio-cells = <2>;
> gpio-controller;
> gpio-ranges = <&scmi_iomuxc 0 98 10>,
> <&scmi_iomuxc 16 152 12>;
> + gpio-reserved-ranges = <10 6>;
> + ngpios = <28>;
> };
>
> aips1: bus@...00000 {
> diff --git a/arch/arm64/boot/dts/freescale/imx95.dtsi
> b/arch/arm64/boot/dts/freescale/imx95.dtsi
> index
> 632631a2911224cadc16a943cdb467e091e43384..a2f4fcffcde59849b
> afcedced3ff317ca6c7cf78 100644
> --- a/arch/arm64/boot/dts/freescale/imx95.dtsi
> +++ b/arch/arm64/boot/dts/freescale/imx95.dtsi
> @@ -1152,6 +1152,7 @@ gpio2: gpio@...10000 {
> <&scmi_clk
> IMX95_CLK_BUSWAKEUP>;
> clock-names = "gpio", "port";
> gpio-ranges = <&scmi_iomuxc 0 4 32>;
> + ngpios = <32>;
> };
>
> gpio3: gpio@...20000 {
> @@ -1168,6 +1169,7 @@ gpio3: gpio@...20000 {
> clock-names = "gpio", "port";
> gpio-ranges = <&scmi_iomuxc 0 104 8>,
> <&scmi_iomuxc 8 74 18>,
> <&scmi_iomuxc 26 42 2>,
> <&scmi_iomuxc 28 0 4>;
> + ngpios = <32>;
> };
>
> gpio4: gpio@...40000 {
> @@ -1183,6 +1185,7 @@ gpio4: gpio@...40000 {
> <&scmi_clk
> IMX95_CLK_BUSWAKEUP>;
> clock-names = "gpio", "port";
> gpio-ranges = <&scmi_iomuxc 0 46 28>,
> <&scmi_iomuxc 28 44 2>;
> + ngpios = <30>;
> };
>
> gpio5: gpio@...50000 {
> @@ -1198,6 +1201,7 @@ gpio5: gpio@...50000 {
> <&scmi_clk
> IMX95_CLK_BUSWAKEUP>;
> clock-names = "gpio", "port";
> gpio-ranges = <&scmi_iomuxc 0 92 12>,
> <&scmi_iomuxc 12 36 6>;
> + ngpios = <18>;
> };
>
> aips1: bus@...00000 {
> @@ -1508,6 +1512,7 @@ gpio1: gpio@...00000 {
> <&scmi_clk IMX95_CLK_M33>;
> clock-names = "gpio", "port";
> gpio-ranges = <&scmi_iomuxc 0 112 16>;
> + ngpios = <16>;
> status = "disabled";
> };
>
>
> --
> 2.34.1
>
Powered by blists - more mailing lists