[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-Id: <20250520-pwm-axi-pwmgen-add-external-clock-v1-0-6cd63cc001c8@baylibre.com>
Date: Tue, 20 May 2025 16:00:43 -0500
From: David Lechner <dlechner@...libre.com>
To: Michael Hennerich <michael.hennerich@...log.com>,
Nuno Sá <nuno.sa@...log.com>,
Trevor Gamblin <tgamblin@...libre.com>,
Uwe Kleine-König <ukleinek@...nel.org>,
Rob Herring <robh@...nel.org>, Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>
Cc: linux-pwm@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, David Lechner <dlechner@...libre.com>
Subject: [PATCH 0/3] pwm: axi-pwmgen: add external clock
When we created the driver for the AXI PWMGEN IP block, we overlooked
the fact that it can optionally be configured to use an external clock
in addition to the AXI bus clock. This is easy to miss in testing
because the bus clock is always on because it is driving other
peripherals as well.
Up to now, users were specifying the external clock if there was one and
the AXI bus clock otherwise. But the proper way to do this is to would
be to always specify the bus clock and only specify the external clock
if the IP block has been configured to use it.
To support this, we extend the bindings to allow 1 or 2 clocks and
modify the driver to handle both cases.
---
David Lechner (3):
dt-bindings: pwm: adi,axi-pwmgen: update documentation link
dt-bindings: pwm: adi,axi-pwmgen: add external clock
pwm: axi-pwmgen: add support for external clock
.../devicetree/bindings/pwm/adi,axi-pwmgen.yaml | 28 ++++++++++++++++++----
drivers/pwm/pwm-axi-pwmgen.c | 23 +++++++++++++++---
2 files changed, 43 insertions(+), 8 deletions(-)
---
base-commit: 484803582c77061b470ac64a634f25f89715be3f
change-id: 20250515-pwm-axi-pwmgen-add-external-clock-0364fbdf809b
Best regards,
--
David Lechner <dlechner@...libre.com>
Powered by blists - more mailing lists