[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <26afac49-2500-470b-a21a-d57e4ff14fa6@linaro.org>
Date: Thu, 22 May 2025 19:52:39 +0200
From: Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>
To: Alexey Klimov <alexey.klimov@...aro.org>,
Srinivas Kandagatla <srini@...nel.org>, Mark Brown <broonie@...nel.org>,
linux-sound@...r.kernel.org
Cc: Liam Girdwood <lgirdwood@...il.com>, Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>, Conor Dooley
<conor+dt@...nel.org>, Bjorn Andersson <andersson@...nel.org>,
Dmitry Baryshkov <lumag@...nel.org>, Konrad Dybcio <konradybcio@...nel.org>,
Konrad Dybcio <konrad.dybcio@....qualcomm.com>,
Jaroslav Kysela <perex@...ex.cz>, Takashi Iwai <tiwai@...e.com>,
linux-arm-msm@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-gpio@...r.kernel.org
Subject: Re: [PATCH v3 07/12] arm64: dts: qcom: sm6115: add LPASS devices
On 22/05/2025 19:40, Alexey Klimov wrote:
> The rxmacro, txmacro, vamacro, soundwire nodes, lpass clock controllers
> are required to support audio playback and audio capture on sm6115 and
> its derivatives.
>
> Cc: Konrad Dybcio <konradybcio@...nel.org>
> Cc: Konrad Dybcio <konrad.dybcio@....qualcomm.com>
Just keep one CC.
> Cc: Srinivas Kandagatla <srini@...nel.org>
> Co-developed-by: Konrad Dybcio <konrad.dybcio@...aro.org>
Missing SoB.
> Signed-off-by: Alexey Klimov <alexey.klimov@...aro.org>
> ---
> arch/arm64/boot/dts/qcom/sm6115.dtsi | 132 +++++++++++++++++++++++++++++++++++
> 1 file changed, 132 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/qcom/sm6115.dtsi b/arch/arm64/boot/dts/qcom/sm6115.dtsi
> index c8865779173eca65f9e94535b5339f590d4b1410..045887ae215b0965ffc098fd31fd18ac1ad90b7b 100644
> --- a/arch/arm64/boot/dts/qcom/sm6115.dtsi
> +++ b/arch/arm64/boot/dts/qcom/sm6115.dtsi
> @@ -2689,6 +2689,138 @@ funnel_apss1_in: endpoint {
> };
> };
...
> + swr0: soundwire@...0000 {
> + compatible = "qcom,soundwire-v1.6.0";
> + reg = <0x0 0x0a740000 0x0 0x2000>;
> + interrupts = <GIC_SPI 296 IRQ_TYPE_LEVEL_HIGH>,
> + <GIC_SPI 79 IRQ_TYPE_LEVEL_HIGH>;
> + clocks = <&txmacro>;
> + clock-names = "iface";
> +
> + resets = <&lpasscc 0>;
> + reset-names = "swr_audio_cgcr";
> +
> + label = "VA_TX";
> + qcom,din-ports = <3>;
> + qcom,dout-ports = <0>;
> +
> + qcom,ports-sinterval-low = /bits/ 8 <0x03 0x03 0x03>;
> + qcom,ports-offset1 = /bits/ 8 <0x01 0x02 0x01>;
> + qcom,ports-offset2 = /bits/ 8 <0x00 0x00 0x00>;
> + qcom,ports-hstart = /bits/ 8 <0xff 0xff 0xff>;
> + qcom,ports-hstop = /bits/ 8 <0xff 0xff 0xff>;
> + qcom,ports-word-length = /bits/ 8 <0xff 0xff 0xff>;
> + qcom,ports-block-pack-mode = /bits/ 8 <0xff 0xff 0xff>;
> + qcom,ports-block-group-count = /bits/ 8 <0xff 0xff 0xff>;
> + qcom,ports-lane-control = /bits/ 8 <0x00 0x00 0x00>;
> +
> + #sound-dai-cells = <1>;
> + #address-cells = <2>;
> + #size-cells = <0>;
Why this not is not disabled? That's a bus. Each bus node makes no sense
on its own without the actual devices, thus it is always disabled in the
SoC file. Just take a look at other DTSI.
> + };
> +
> + lpasscc: clock-controller@...c000 {
> + compatible = "qcom,sm6115-lpasscc";
> + reg = <0x0 0x0a7ec000 0x0 0x1000>;
> + #reset-cells = <1>;
> + };
> +
> remoteproc_adsp: remoteproc@...0000 {
Looks like not ordered by unit address.
> compatible = "qcom,sm6115-adsp-pas";
> reg = <0x0 0x0a400000 0x0 0x4040>;
>
Best regards,
Krzysztof
Powered by blists - more mailing lists