[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <aa3b2d08-f2aa-4349-9d22-905bbe12f673@kernel.org>
Date: Mon, 26 May 2025 06:17:30 +0200
From: Krzysztof Kozlowski <krzk@...nel.org>
To: george.moussalem@...look.com, Andrew Lunn <andrew@...n.ch>,
Heiner Kallweit <hkallweit1@...il.com>, Russell King
<linux@...linux.org.uk>, "David S. Miller" <davem@...emloft.net>,
Eric Dumazet <edumazet@...gle.com>, Jakub Kicinski <kuba@...nel.org>,
Paolo Abeni <pabeni@...hat.com>, Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>, Conor Dooley
<conor+dt@...nel.org>, Florian Fainelli <f.fainelli@...il.com>,
Philipp Zabel <p.zabel@...gutronix.de>,
Bjorn Andersson <andersson@...nel.org>,
Konrad Dybcio <konradybcio@...nel.org>,
Michael Turquette <mturquette@...libre.com>, Stephen Boyd <sboyd@...nel.org>
Cc: netdev@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-arm-msm@...r.kernel.org,
linux-clk@...r.kernel.org
Subject: Re: [PATCH 1/5] dt-bindings: net: qca,ar803x: Add IPQ5018 Internal GE
PHY support
On 25/05/2025 19:56, George Moussalem via B4 Relay wrote:
> diff --git a/Documentation/devicetree/bindings/net/qca,ar803x.yaml b/Documentation/devicetree/bindings/net/qca,ar803x.yaml
> index 3acd09f0da863137f8a05e435a1fd28a536c2acd..a9e94666ff0af107db4f358b144bf8644c6597e8 100644
> --- a/Documentation/devicetree/bindings/net/qca,ar803x.yaml
> +++ b/Documentation/devicetree/bindings/net/qca,ar803x.yaml
> @@ -60,6 +60,29 @@ properties:
> minimum: 1
> maximum: 255
>
> + qca,dac:
> + description:
> + Values for MDAC and EDAC to adjust amplitude, bias current settings,
> + and error detection and correction algorithm. Only set in a PHY to PHY
> + link architecture to accommodate for short cable length.
> + $ref: /schemas/types.yaml#/definitions/uint32-array
> + items:
> + - items:
> + - description: value for MDAC. Expected 0x10, if set
> + - description: value for EDAC. Expected 0x10, if set
If this is fixed to 0x10, then this is fully deducible from compatible.
Drop entire property.
> + - maxItems: 1
> +
> + qca,eth-ldo-enable:
qcom,tcsr-syscon to match property already used.
> + description:
> + Register in TCSR to enable the LDO controller to supply
> + low voltages to the common ethernet block (CMN BLK).
> + $ref: /schemas/types.yaml#/definitions/phandle-array
> + items:
> + - items:
> + - description: phandle of TCSR syscon
> + - description: offset of TCSR register to enable the LDO controller
> + - maxItems: 1
You listed two items, but second is just one item? Drop.
Best regards,
Krzysztof
Powered by blists - more mailing lists