[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID:
<DS7PR19MB88832182FE959CA0D15C3AD09D6BA@DS7PR19MB8883.namprd19.prod.outlook.com>
Date: Mon, 9 Jun 2025 16:38:56 +0400
From: George Moussalem <george.moussalem@...look.com>
To: Andrew Lunn <andrew@...n.ch>
Cc: Heiner Kallweit <hkallweit1@...il.com>,
Russell King <linux@...linux.org.uk>, "David S. Miller"
<davem@...emloft.net>, Eric Dumazet <edumazet@...gle.com>,
Jakub Kicinski <kuba@...nel.org>, Paolo Abeni <pabeni@...hat.com>,
Rob Herring <robh@...nel.org>, Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>, Florian Fainelli <f.fainelli@...il.com>,
Philipp Zabel <p.zabel@...gutronix.de>,
Bjorn Andersson <andersson@...nel.org>,
Konrad Dybcio <konradybcio@...nel.org>,
Michael Turquette <mturquette@...libre.com>, Stephen Boyd
<sboyd@...nel.org>, netdev@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, linux-arm-msm@...r.kernel.org,
linux-clk@...r.kernel.org
Subject: Re: [PATCH v4 2/5] dt-bindings: net: qca,ar803x: Add IPQ5018 Internal
GE PHY support
On 6/9/25 16:30, Andrew Lunn wrote:
> On Mon, Jun 09, 2025 at 04:20:12PM +0400, George Moussalem wrote:
>>
>>
>> On 6/9/25 16:16, Andrew Lunn wrote:
>>>> + - |
>>>> + #include <dt-bindings/reset/qcom,gcc-ipq5018.h>
>>>> +
>>>> + mdio {
>>>> + #address-cells = <1>;
>>>> + #size-cells = <0>;
>>>> +
>>>> + /* add alias to set qcom,dac-preset-short-cable on boards that need it */
>>>> + ge_phy: ethernet-phy@7 {
>>>> + compatible = "ethernet-phy-id004d.d0c0";
>>>> + reg = <7>;
>>>> +
>>>> + resets = <&gcc GCC_GEPHY_MISC_ARES>;
>>>
>>> What do you mean by 'alias' here?
>>
>> I mean node label. Since it was asked whether it's needed, I added a comment
>> to say why, so that boards can reference it to set the
>> qcom,dac-preset-short-cable property in the DTS as needed.
>
> Ah, O.K.
>
> Since this is internal, it is in the SoC .dtsi file. A board would
> need to add the property in its .dts file, and so need a label.
>
> The example itself does not need it, but the real version does. If it
> was one of the DT Maintainers who asked for it, then O.K.
Konrad recommended to drop the label unless it was used/passed
somewhere. So I added this comment to explain for future reference. If
not needed, I'll remove it for v5.
Link:
https://lore.kernel.org/all/f2732e5a-7ba9-4ed3-8d33-bd2b996f9a1d@oss.qualcomm.com/
>
> Andrew
George
Powered by blists - more mailing lists