[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-Id: <01D5D2D8-392B-4926-884E-1A4FB87C03CF@gmail.com>
Date: Thu, 12 Jun 2025 12:22:19 +0200
From: Piotr Oniszczuk <piotr.oniszczuk@...il.com>
To: Cristian Ciocaltea <cristian.ciocaltea@...labora.com>
Cc: Sandy Huang <hjc@...k-chips.com>,
Heiko Stübner <heiko@...ech.de>,
Andy Yan <andy.yan@...k-chips.com>,
Maarten Lankhorst <maarten.lankhorst@...ux.intel.com>,
Maxime Ripard <mripard@...nel.org>,
Thomas Zimmermann <tzimmermann@...e.de>,
David Airlie <airlied@...il.com>,
Simona Vetter <simona@...ll.ch>,
Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>,
kernel@...labora.com,
Andy Yan <andyshrk@....com>,
Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>,
dri-devel@...ts.freedesktop.org,
devicetree@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org,
linux-rockchip@...ts.infradead.org,
linux-kernel@...r.kernel.org,
stable@...r.kernel.org
Subject: Re: [PATCH 3/3] arm64: dts: rockchip: Add HDMI PHY PLL clock source
to VOP2 on rk3576
> Wiadomość napisana przez Cristian Ciocaltea <cristian.ciocaltea@...labora.com> w dniu 11 cze 2025, o godz. 23:47:
>
> Since commit c871a311edf0 ("phy: rockchip: samsung-hdptx: Setup TMDS
> char rate via phy_configure_opts_hdmi"), the workaround of passing the
> rate from DW HDMI QP bridge driver via phy_set_bus_width() became
> partially broken, as it cannot reliably handle mode switches anymore.
>
> Attempting to fix this up at PHY level would not only introduce
> additional hacks, but it would also fail to adequately resolve the
> display issues that are a consequence of the system CRU limitations.
>
> Instead, proceed with the solution already implemented for RK3588: make
> use of the HDMI PHY PLL as a better suited DCLK source for VOP2. This
> will not only address the aforementioned problem, but it should also
> facilitate the proper operation of display modes up to 4K@...z.
>
> It's worth noting that anything above 4K@...z still requires high TMDS
> clock ratio and scrambling support, which hasn't been mainlined yet.
>
> Fixes: d74b842cab08 ("arm64: dts: rockchip: Add vop for rk3576")
> Cc: stable@...r.kernel.org
> Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@...labora.com>
> ---
> arch/arm64/boot/dts/rockchip/rk3576.dtsi | 6 ++++--
> 1 file changed, 4 insertions(+), 2 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/rockchip/rk3576.dtsi b/arch/arm64/boot/dts/rockchip/rk3576.dtsi
> index 6a13fe0c3513fb2ff7cd535aa70e3386c37696e4..b1ac23035dd789f0478bf10c78c74ef167d94904 100644
> --- a/arch/arm64/boot/dts/rockchip/rk3576.dtsi
> +++ b/arch/arm64/boot/dts/rockchip/rk3576.dtsi
> @@ -1155,12 +1155,14 @@ vop: vop@...00000 {
> <&cru HCLK_VOP>,
> <&cru DCLK_VP0>,
> <&cru DCLK_VP1>,
> - <&cru DCLK_VP2>;
> + <&cru DCLK_VP2>,
> + <&hdptxphy>;
> clock-names = "aclk",
> "hclk",
> "dclk_vp0",
> "dclk_vp1",
> - "dclk_vp2";
> + "dclk_vp2",
> + "pll_hdmiphy0";
> iommus = <&vop_mmu>;
> power-domains = <&power RK3576_PD_VOP>;
> rockchip,grf = <&sys_grf>;
>
> --
> 2.49.0
>
>
> _______________________________________________
> Linux-rockchip mailing list
> Linux-rockchip@...ts.infradead.org
> http://lists.infradead.org/mailman/listinfo/linux-rockchip
Cristian,
It fixes fractional hd modes for me on rk3576.
Thx for this fix!
Powered by blists - more mailing lists