[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <535a4e1c-33d3-4941-8315-df20d4dec799@collabora.com>
Date: Thu, 12 Jun 2025 14:04:09 +0300
From: Cristian Ciocaltea <cristian.ciocaltea@...labora.com>
To: Piotr Oniszczuk <piotr.oniszczuk@...il.com>
Cc: Sandy Huang <hjc@...k-chips.com>, Heiko Stübner
<heiko@...ech.de>, Andy Yan <andy.yan@...k-chips.com>,
Maarten Lankhorst <maarten.lankhorst@...ux.intel.com>,
Maxime Ripard <mripard@...nel.org>, Thomas Zimmermann <tzimmermann@...e.de>,
David Airlie <airlied@...il.com>, Simona Vetter <simona@...ll.ch>,
Rob Herring <robh@...nel.org>, Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>, kernel@...labora.com,
Andy Yan <andyshrk@....com>,
Krzysztof Kozlowski <krzysztof.kozlowski@...aro.org>,
dri-devel@...ts.freedesktop.org, devicetree@...r.kernel.org,
linux-arm-kernel@...ts.infradead.org, linux-rockchip@...ts.infradead.org,
linux-kernel@...r.kernel.org, stable@...r.kernel.org
Subject: Re: [PATCH 3/3] arm64: dts: rockchip: Add HDMI PHY PLL clock source
to VOP2 on rk3576
On 6/12/25 1:22 PM, Piotr Oniszczuk wrote:
>
>
>> Wiadomość napisana przez Cristian Ciocaltea <cristian.ciocaltea@...labora.com> w dniu 11 cze 2025, o godz. 23:47:
>>
>> Since commit c871a311edf0 ("phy: rockchip: samsung-hdptx: Setup TMDS
>> char rate via phy_configure_opts_hdmi"), the workaround of passing the
>> rate from DW HDMI QP bridge driver via phy_set_bus_width() became
>> partially broken, as it cannot reliably handle mode switches anymore.
>>
>> Attempting to fix this up at PHY level would not only introduce
>> additional hacks, but it would also fail to adequately resolve the
>> display issues that are a consequence of the system CRU limitations.
>>
>> Instead, proceed with the solution already implemented for RK3588: make
>> use of the HDMI PHY PLL as a better suited DCLK source for VOP2. This
>> will not only address the aforementioned problem, but it should also
>> facilitate the proper operation of display modes up to 4K@...z.
>>
>> It's worth noting that anything above 4K@...z still requires high TMDS
>> clock ratio and scrambling support, which hasn't been mainlined yet.
>>
>> Fixes: d74b842cab08 ("arm64: dts: rockchip: Add vop for rk3576")
>> Cc: stable@...r.kernel.org
>> Signed-off-by: Cristian Ciocaltea <cristian.ciocaltea@...labora.com>
>> ---
>> arch/arm64/boot/dts/rockchip/rk3576.dtsi | 6 ++++--
>> 1 file changed, 4 insertions(+), 2 deletions(-)
>>
>> diff --git a/arch/arm64/boot/dts/rockchip/rk3576.dtsi b/arch/arm64/boot/dts/rockchip/rk3576.dtsi
>> index 6a13fe0c3513fb2ff7cd535aa70e3386c37696e4..b1ac23035dd789f0478bf10c78c74ef167d94904 100644
>> --- a/arch/arm64/boot/dts/rockchip/rk3576.dtsi
>> +++ b/arch/arm64/boot/dts/rockchip/rk3576.dtsi
>> @@ -1155,12 +1155,14 @@ vop: vop@...00000 {
>> <&cru HCLK_VOP>,
>> <&cru DCLK_VP0>,
>> <&cru DCLK_VP1>,
>> - <&cru DCLK_VP2>;
>> + <&cru DCLK_VP2>,
>> + <&hdptxphy>;
>> clock-names = "aclk",
>> "hclk",
>> "dclk_vp0",
>> "dclk_vp1",
>> - "dclk_vp2";
>> + "dclk_vp2",
>> + "pll_hdmiphy0";
>> iommus = <&vop_mmu>;
>> power-domains = <&power RK3576_PD_VOP>;
>> rockchip,grf = <&sys_grf>;
>>
>> --
>> 2.49.0
>>
>>
>> _______________________________________________
>> Linux-rockchip mailing list
>> Linux-rockchip@...ts.infradead.org
>> http://lists.infradead.org/mailman/listinfo/linux-rockchip
>
> Cristian,
> It fixes fractional hd modes for me on rk3576.
> Thx for this fix!
Thanks for testing! :)
Powered by blists - more mailing lists