[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20250620145448.5e48d9b0@donnerap.manchester.arm.com>
Date: Fri, 20 Jun 2025 14:54:57 +0100
From: Andre Przywara <andre.przywara@....com>
To: Chen-Yu Tsai <wens@...nel.org>
Cc: Rob Herring <robh@...nel.org>, Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>, Chen-Yu Tsai <wens@...e.org>, Jernej
Skrabec <jernej@...nel.org>, Samuel Holland <samuel@...lland.org>,
devicetree@...r.kernel.org, linux-sunxi@...ts.linux.dev,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH 3/5] arm64: dts: allwinner: a523: Move rgmii0 pins to
correct location
On Fri, 20 Jun 2025 01:30:05 +0800
Chen-Yu Tsai <wens@...nel.org> wrote:
> From: Chen-Yu Tsai <wens@...e.org>
>
> Nodes are supposed to be sorted by address, or if no addresses
> apply, by node name. The rgmii0 pins are out of order, possibly
> due to multiple patches adding pin mux settings conflicting.
>
> Move the rgmii0 pins to the correct location.
>
> Signed-off-by: Chen-Yu Tsai <wens@...e.org>
Reviewed-by: Andre Przywara <andre.przywara@....com>
Cheers,
Andre
> ---
> .../arm64/boot/dts/allwinner/sun55i-a523.dtsi | 20 +++++++++----------
> 1 file changed, 10 insertions(+), 10 deletions(-)
>
> diff --git a/arch/arm64/boot/dts/allwinner/sun55i-a523.dtsi b/arch/arm64/boot/dts/allwinner/sun55i-a523.dtsi
> index 458d7ecedacd..30613a0b1124 100644
> --- a/arch/arm64/boot/dts/allwinner/sun55i-a523.dtsi
> +++ b/arch/arm64/boot/dts/allwinner/sun55i-a523.dtsi
> @@ -126,16 +126,6 @@ pio: pinctrl@...0000 {
> interrupt-controller;
> #interrupt-cells = <3>;
>
> - rgmii0_pins: rgmii0-pins {
> - pins = "PH0", "PH1", "PH2", "PH3", "PH4",
> - "PH5", "PH6", "PH7", "PH9", "PH10",
> - "PH14", "PH15", "PH16", "PH17", "PH18";
> - allwinner,pinmux = <5>;
> - function = "emac0";
> - drive-strength = <40>;
> - bias-disable;
> - };
> -
> mmc0_pins: mmc0-pins {
> pins = "PF0" ,"PF1", "PF2", "PF3", "PF4", "PF5";
> allwinner,pinmux = <2>;
> @@ -163,6 +153,16 @@ mmc2_pins: mmc2-pins {
> bias-pull-up;
> };
>
> + rgmii0_pins: rgmii0-pins {
> + pins = "PH0", "PH1", "PH2", "PH3", "PH4",
> + "PH5", "PH6", "PH7", "PH9", "PH10",
> + "PH14", "PH15", "PH16", "PH17", "PH18";
> + allwinner,pinmux = <5>;
> + function = "emac0";
> + drive-strength = <40>;
> + bias-disable;
> + };
> +
> uart0_pb_pins: uart0-pb-pins {
> pins = "PB9", "PB10";
> allwinner,pinmux = <2>;
Powered by blists - more mailing lists