[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20250620145508.4d483885@donnerap.manchester.arm.com>
Date: Fri, 20 Jun 2025 14:55:08 +0100
From: Andre Przywara <andre.przywara@....com>
To: Chen-Yu Tsai <wens@...nel.org>
Cc: Rob Herring <robh@...nel.org>, Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>, Chen-Yu Tsai <wens@...e.org>, Jernej
Skrabec <jernej@...nel.org>, Samuel Holland <samuel@...lland.org>,
devicetree@...r.kernel.org, linux-sunxi@...ts.linux.dev,
linux-arm-kernel@...ts.infradead.org, linux-kernel@...r.kernel.org
Subject: Re: [PATCH 4/5] arm64: dts: allwinner: a523: Add UART1 pins
On Fri, 20 Jun 2025 01:30:06 +0800
Chen-Yu Tsai <wens@...nel.org> wrote:
> From: Chen-Yu Tsai <wens@...e.org>
>
> UART1 is normally used to connect to the Bluetooth side of a Broadcom
> WiFi+BT combo chip. The connection uses 4 pins.
>
> Add pinmux nodes for UART1, one for the RX/TX pins, and one for the
> RTS/CTS pins.
Interestingly there is only one possible set of pins for UART1, so the
naming is correct. Which would also mean we can insert the pinctrl-0
property in the UART DT node in the .dtsi file already.
Regardless, checked against the manual:
> Signed-off-by: Chen-Yu Tsai <wens@...e.org>
Reviewed-by: Andre Przywara <andre.przywara@....com>
Cheers,
Andre
> ---
> arch/arm64/boot/dts/allwinner/sun55i-a523.dtsi | 14 ++++++++++++++
> 1 file changed, 14 insertions(+)
>
> diff --git a/arch/arm64/boot/dts/allwinner/sun55i-a523.dtsi b/arch/arm64/boot/dts/allwinner/sun55i-a523.dtsi
> index 30613a0b1124..6f62201fd739 100644
> --- a/arch/arm64/boot/dts/allwinner/sun55i-a523.dtsi
> +++ b/arch/arm64/boot/dts/allwinner/sun55i-a523.dtsi
> @@ -168,6 +168,20 @@ uart0_pb_pins: uart0-pb-pins {
> allwinner,pinmux = <2>;
> function = "uart0";
> };
> +
> + /omit-if-no-ref/
> + uart1_pins: uart1-pins {
> + pins = "PG6", "PG7";
> + function = "uart1";
> + allwinner,pinmux = <2>;
> + };
> +
> + /omit-if-no-ref/
> + uart1_rts_cts_pins: uart1-rts-cts-pins {
> + pins = "PG8", "PG9";
> + function = "uart1";
> + allwinner,pinmux = <2>;
> + };
> };
>
> ccu: clock-controller@...1000 {
Powered by blists - more mailing lists