[<prev] [next>] [<thread-prev] [day] [month] [year] [list]
Message-ID: <CAMuHMdXKBwL2OOLMajVp35BfbKA7PXLP4tER9OE_LKM=VjPq8A@mail.gmail.com>
Date: Thu, 26 Jun 2025 14:01:16 +0200
From: Geert Uytterhoeven <geert@...ux-m68k.org>
To: Prabhakar <prabhakar.csengg@...il.com>
Cc: Magnus Damm <magnus.damm@...il.com>, Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>, Conor Dooley <conor+dt@...nel.org>,
linux-renesas-soc@...r.kernel.org, devicetree@...r.kernel.org,
linux-kernel@...r.kernel.org, Biju Das <biju.das.jz@...renesas.com>,
Fabrizio Castro <fabrizio.castro.jz@...esas.com>,
Lad Prabhakar <prabhakar.mahadev-lad.rj@...renesas.com>
Subject: Re: [PATCH 3/3] arm64: dts: renesas: Add CN15 eMMC and SD overlays
for RZ/V2H EVK
Hi Prabhakar,
On Fri, 20 Jun 2025 at 14:10, Prabhakar <prabhakar.csengg@...il.com> wrote:
> From: Lad Prabhakar <prabhakar.mahadev-lad.rj@...renesas.com>
>
> Introduce device tree overlays to support the eMMC (RTK0EF0186B02000BJ)
> and microSD (RTK0EF0186B01000BJ) sub-boards via the CN15 connector on the
> RZ/V2H EVK. These overlays make use of shared DTSI fragments
> (`rzv2-evk-cn15-emmc-common.dtsi` and `rzv2-evk-cn15-sd-common.dtsi`)
> that encapsulate common CN15-specific configurations, including pinctrl
> settings, SDHI0 setup, and required regulators.
>
> Additionally, the base board DTS is updated to define an `mmc0` alias
> pointing to `&sdhi0`, and to add a fixed 1.8V regulator node (`reg_1p8v`)
> intended for use by the optional eMMC sub-board and, in the future, the
> ADV7535 HDMI encoder (not yet enabled in the DTS).
>
> Signed-off-by: Lad Prabhakar <prabhakar.mahadev-lad.rj@...renesas.com>
Thanks for your patch!
> --- /dev/null
> +++ b/arch/arm64/boot/dts/renesas/r9a09g057h44-rzv2h-evk-cn15-emmc.dtso
> @@ -0,0 +1,15 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Device Tree overlay for the RZ/V2H EVK with the eMMC sub-board
> + * (RTK0EF0186802000BJ) connected to the CN15 connector.
> + *
> + * Copyright (C) 2025 Renesas Electronics Corp.
> + */
> +
> +/dts-v1/;
> +/plugin/;
> +
> +#define RZV2H_PA 10
> +#define EMMC_GPIO(port, pin) RZG2L_GPIO(RZV2H_P##port, pin)
> +
> +#include "rzv2-evk-cn15-emmc-common.dtsi"
> diff --git a/arch/arm64/boot/dts/renesas/r9a09g057h44-rzv2h-evk-cn15-sd.dtso b/arch/arm64/boot/dts/renesas/r9a09g057h44-rzv2h-evk-cn15-sd.dtso
> new file mode 100644
> index 000000000000..47cb581c1add
> --- /dev/null
> +++ b/arch/arm64/boot/dts/renesas/r9a09g057h44-rzv2h-evk-cn15-sd.dtso
> @@ -0,0 +1,16 @@
> +// SPDX-License-Identifier: GPL-2.0
> +/*
> + * Device Tree overlay for the RZ/V2H EVK with the SD sub-board
> + * (RTK0EF0186B01000BJ) connected to the CN15 connector.
> + *
> + * Copyright (C) 2025 Renesas Electronics Corp.
> + */
> +
> +/dts-v1/;
> +/plugin/;
> +
> +#define RZV2H_PA 10
> +#define SD_GPIO(port, pin) RZG2L_GPIO(RZV2H_P##port, pin)
> +#define SD_PORT_PINMUX(b, p, f) RZG2L_PORT_PINMUX(RZV2H_P##b, p, f)
> +
> +#include "rzv2-evk-cn15-sd-common.dtsi"
These two generate the exact same .dtbo as for RZ/V2N.
> diff --git a/arch/arm64/boot/dts/renesas/r9a09g057h44-rzv2h-evk.dts b/arch/arm64/boot/dts/renesas/r9a09g057h44-rzv2h-evk.dts
> index 01b2e0c7c7db..219347d73753 100644
> --- a/arch/arm64/boot/dts/renesas/r9a09g057h44-rzv2h-evk.dts
> +++ b/arch/arm64/boot/dts/renesas/r9a09g057h44-rzv2h-evk.dts
> @@ -25,6 +25,7 @@ aliases {
> i2c6 = &i2c6;
> i2c7 = &i2c7;
> i2c8 = &i2c8;
> + mmc0 = &sdhi0;
Please move to the (common) .dtso in patch 1.
> mmc1 = &sdhi1;
> serial0 = &scif;
> };
The rest LGTM.
Gr{oetje,eeting}s,
Geert
--
Geert Uytterhoeven -- There's lots of Linux beyond ia32 -- geert@...ux-m68k.org
In personal conversations with technical people, I call myself a hacker. But
when I'm talking to journalists I just say "programmer" or something like that.
-- Linus Torvalds
Powered by blists - more mailing lists