| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20250703153823.806073-3-Jianping.Shen@de.bosch.com>
Date: Thu, 3 Jul 2025 17:38:23 +0200
From: <Jianping.Shen@...bosch.com>
To: <jic23@...nel.org>, <lars@...afoo.de>, <robh@...nel.org>,
<krzk+dt@...nel.org>, <conor+dt@...nel.org>, <dima.fedrau@...il.com>,
<marcelo.schmitt1@...il.com>, <linux-iio@...r.kernel.org>,
<devicetree@...r.kernel.org>, <linux-kernel@...r.kernel.org>,
<Jianping.Shen@...bosch.com>, <Christian.Lorenz3@...bosch.com>,
<Ulrike.Frauendorf@...bosch.com>, <Kai.Dolde@...bosch.com>
Subject: [PATCH v3 2/2] iio: imu: smi330: Add driver
From: Jianping Shen <Jianping.Shen@...bosch.com>
Add the iio driver for bosch imu smi330. The smi330 is a combined
three axis angular rate and three axis acceleration sensor.
Signed-off-by: Jianping Shen <Jianping.Shen@...bosch.com>
---
drivers/iio/imu/Kconfig | 1 +
drivers/iio/imu/Makefile | 1 +
drivers/iio/imu/smi330/Kconfig | 39 ++
drivers/iio/imu/smi330/Makefile | 7 +
drivers/iio/imu/smi330/smi330.h | 240 +++++++++
drivers/iio/imu/smi330/smi330_core.c | 779 +++++++++++++++++++++++++++
drivers/iio/imu/smi330/smi330_i2c.c | 136 +++++
drivers/iio/imu/smi330/smi330_spi.c | 91 ++++
8 files changed, 1294 insertions(+)
create mode 100644 drivers/iio/imu/smi330/Kconfig
create mode 100644 drivers/iio/imu/smi330/Makefile
create mode 100644 drivers/iio/imu/smi330/smi330.h
create mode 100644 drivers/iio/imu/smi330/smi330_core.c
create mode 100644 drivers/iio/imu/smi330/smi330_i2c.c
create mode 100644 drivers/iio/imu/smi330/smi330_spi.c
diff --git a/drivers/iio/imu/Kconfig b/drivers/iio/imu/Kconfig
index 15612f0f189..01d21e4034c 100644
--- a/drivers/iio/imu/Kconfig
+++ b/drivers/iio/imu/Kconfig
@@ -124,6 +124,7 @@ config SMI240
This driver can also be built as a module. If so, the module will be
called smi240.
+source "drivers/iio/imu/smi330/Kconfig"
source "drivers/iio/imu/st_lsm6dsx/Kconfig"
source "drivers/iio/imu/st_lsm9ds0/Kconfig"
diff --git a/drivers/iio/imu/Makefile b/drivers/iio/imu/Makefile
index e901aea498d..25948247df9 100644
--- a/drivers/iio/imu/Makefile
+++ b/drivers/iio/imu/Makefile
@@ -31,5 +31,6 @@ obj-$(CONFIG_KMX61) += kmx61.o
obj-$(CONFIG_SMI240) += smi240.o
+obj-y += smi330/
obj-y += st_lsm6dsx/
obj-y += st_lsm9ds0/
diff --git a/drivers/iio/imu/smi330/Kconfig b/drivers/iio/imu/smi330/Kconfig
new file mode 100644
index 00000000000..95b06f2317e
--- /dev/null
+++ b/drivers/iio/imu/smi330/Kconfig
@@ -0,0 +1,39 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# SMI330 IMU driver
+#
+
+config SMI330
+ tristate "Bosch Sensor SMI330 Inertial Measurement Unit"
+ select IIO_BUFFER
+ select IIO_TRIGGERED_BUFFER
+ help
+ Enable support for the Bosch SMI330 IMU.
+
+ The driver supports different operation modes like polling,
+ data ready or fifo mode and advanced features like no-motion,
+ no-motion, any-motion or tilt detection.
+
+config SMI330_I2C
+ tristate "Bosch SMI330 I2C driver"
+ depends on I2C
+ select SMI330
+ select REGMAP_I2C
+ help
+ Enable support for the Bosch SMI330 6-Axis IMU connected to I2C
+ interface.
+
+ This driver can also be built as a module. If so, the module will be
+ called smi330_i2c.
+
+config SMI330_SPI
+ tristate "Bosch SMI330 SPI driver"
+ depends on SPI
+ select SMI330
+ select REGMAP_SPI
+ help
+ Enable support for the Bosch SMI330 6-Axis IMU connected to SPI
+ interface.
+
+ This driver can also be built as a module. If so, the module will be
+ called smi330_spi.
diff --git a/drivers/iio/imu/smi330/Makefile b/drivers/iio/imu/smi330/Makefile
new file mode 100644
index 00000000000..c663dcb5a9f
--- /dev/null
+++ b/drivers/iio/imu/smi330/Makefile
@@ -0,0 +1,7 @@
+# SPDX-License-Identifier: GPL-2.0
+#
+# Makefile for Bosch SMI330 IMU
+#
+obj-$(CONFIG_SMI330) += smi330_core.o
+obj-$(CONFIG_SMI330_I2C) += smi330_i2c.o
+obj-$(CONFIG_SMI330_SPI) += smi330_spi.o
diff --git a/drivers/iio/imu/smi330/smi330.h b/drivers/iio/imu/smi330/smi330.h
new file mode 100644
index 00000000000..bd896e86977
--- /dev/null
+++ b/drivers/iio/imu/smi330/smi330.h
@@ -0,0 +1,240 @@
+/* SPDX-License-Identifier: BSD-3-Clause OR GPL-2.0 */
+/*
+ * Copyright (c) 2025 Robert Bosch GmbH.
+ */
+#ifndef _SMI330_H
+#define _SMI330_H
+
+#include <linux/bits.h>
+#include <linux/device.h>
+#include <linux/kernel.h>
+#include <linux/regmap.h>
+#include <linux/types.h>
+
+#include <linux/iio/iio.h>
+#include <linux/iio/trigger.h>
+
+#define SMI330_NO_ERROR_MASK (BIT(2) | BIT(0))
+#define SMI330_ST_SUCCESS_MASK GENMASK(6, 0)
+
+#define SMI330_ALL_CHAN_MSK GENMASK(6, 0)
+
+#define SMI330_CHIP_ID 0x42
+
+#define SMI330_SPI_WR_MASK GENMASK(6, 0)
+#define SMI330_SPI_RD_MASK BIT(7)
+
+#define SMI330_SOFT_RESET_DELAY 2000
+
+/* Register map */
+#define SMI330_CHIP_ID_REG 0x00
+#define SMI330_ERR_REG 0x01
+#define SMI330_STATUS_REG 0x02
+#define SMI330_ACCEL_X_REG 0x03
+#define SMI330_GYRO_X_REG 0x06
+#define SMI330_TEMP_REG 0x09
+#define SMI330_INT1_STATUS_REG 0x0D
+#define SMI330_FEATURE_IO0_REG 0x10
+#define SMI330_FEATURE_IO1_REG 0x11
+#define SMI330_FEATURE_IO2_REG 0x12
+#define SMI330_FEATURE_IO_STATUS_REG 0x14
+#define SMI330_FIFO_FILL_LEVEL_REG 0x15
+#define SMI330_FIFO_DATA_REG 0x16
+#define SMI330_ACCEL_CFG_REG 0x20
+#define SMI330_GYRO_CFG_REG 0x21
+#define SMI330_ALT_ACCEL_CFG_REG 0x28
+#define SMI330_ALT_GYRO_CFG_REG 0x29
+#define SMI330_ALT_CONF_REG 0x2A
+#define SMI330_ALT_STATUS_REG 0x2B
+#define SMI330_FIFO_WATERMARK_REG 0x35
+#define SMI330_FIFO_CONF_REG 0x36
+#define SMI330_FIFO_CTRL_REG 0x37
+#define SMI330_IO_INT_CTRL_REG 0x38
+#define SMI330_INT_CONF_REG 0x39
+#define SMI330_INT_MAP1_REG 0x3A
+#define SMI330_INT_MAP2_REG 0x3B
+#define SMI330_FEATURE_CTRL_REG 0x40
+#define SMI330_FEATURE_DATA_ADDR_REG 0x41
+#define SMI330_FEATURE_DATA_TX_REG 0x42
+#define SMI330_FEATURE_DATA_STATUS_REG 0x43
+#define SMI330_CMD_REG 0x7E
+#define SMI330_RES_CFG_REG 0x7F
+
+/* Register mask */
+#define SMI330_ERR_FATAL_MASK BIT(0)
+#define SMI330_ERR_ACC_CONF_MASK BIT(5)
+#define SMI330_ERR_GYR_CONF_MASK BIT(6)
+#define SMI330_STATUS_POR_MASK BIT(0)
+#define SMI330_INT_STATUS_NOMO_MASK BIT(0)
+#define SMI330_INT_STATUS_ANYMO_MASK BIT(1)
+#define SMI330_INT_STATUS_TILT_MASK BIT(7)
+#define SMI330_INT_STATUS_ACC_GYR_DRDY_MASK GENMASK(13, 12)
+#define SMI330_INT_STATUS_FWM_MASK BIT(14)
+#define SMI330_INT_STATUS_FFULL_MASK BIT(15)
+#define SMI330_FEATURE_IO0_NOMO_X_EN_MASK BIT(0)
+#define SMI330_FEATURE_IO0_NOMO_Y_EN_MASK BIT(1)
+#define SMI330_FEATURE_IO0_NOMO_Z_EN_MASK BIT(2)
+#define SMI330_FEATURE_IO0_ANYMO_X_EN_MASK BIT(3)
+#define SMI330_FEATURE_IO0_ANYMO_Y_EN_MASK BIT(4)
+#define SMI330_FEATURE_IO0_ANYMO_Z_EN_MASK BIT(5)
+#define SMI330_FEATURE_IO0_TILT_EN_MASK BIT(11)
+#define SMI330_FEATURE_IO1_ERROR_MASK GENMASK(3, 0)
+#define SMI330_FEATURE_IO1_SC_COMPLETE_MASK BIT(4)
+#define SMI330_FEATURE_IO1_ST_RESULT_MASK BIT(6)
+#define SMI330_FEATURE_IO1_STATE_MASK GENMASK(12, 11)
+#define SMI330_FEATURE_IO_STATUS_MASK BIT(0)
+#define SMI330_FIFO_FILL_LEVEL_MASK GENMASK(10, 0)
+#define SMI330_CFG_MASK GENMASK(15, 0)
+#define SMI330_CFG_ODR_MASK GENMASK(3, 0)
+#define SMI330_CFG_RANGE_MASK GENMASK(6, 4)
+#define SMI330_CFG_BW_MASK BIT(7)
+#define SMI330_CFG_AVG_NUM_MASK GENMASK(10, 8)
+#define SMI330_CFG_MODE_MASK GENMASK(14, 12)
+#define SMI330_ALT_CONF_ACC_EN_MASK BIT(0)
+#define SMI330_ALT_CONF_GYR_EN_MASK BIT(4)
+#define SMI330_ALT_CONF_EN_MASK \
+ (SMI330_ALT_CONF_ACC_EN_MASK | SMI330_ALT_CONF_GYR_EN_MASK)
+#define SMI330_ALT_CONF_RST_CONF_EN_MASK BIT(8)
+#define SMI330_FIFO_WATERMARK_MASK GENMASK(9, 0)
+#define SMI330_FIFO_CONF_MASK GENMASK(11, 9)
+#define SMI330_FIFO_CONF_TEMP_MASK BIT(11)
+#define SMI330_FIFO_CONF_GYR_MASK BIT(10)
+#define SMI330_FIFO_CONF_ACC_MASK BIT(9)
+#define SMI330_FIFO_CTRL_FLUSH_MASK BIT(0)
+#define SMI330_IO_INT_CTRL_INT1_MASK GENMASK(2, 0)
+#define SMI330_IO_INT_CTRL_INT2_MASK GENMASK(10, 8)
+#define SMI330_INT_CONF_LATCH_MASK BIT(0)
+#define SMI330_INT_MAP1_TILT_MASK GENMASK(15, 14)
+#define SMI330_INT_MAP1_ANYMO_MASK GENMASK(3, 2)
+#define SMI330_INT_MAP1_NOMO_MASK GENMASK(1, 0)
+#define SMI330_INT_MAP2_FIFO_FULL_MASK GENMASK(15, 14)
+#define SMI330_INT_MAP2_FIFO_WM_MASK GENMASK(13, 12)
+#define SMI330_INT_MAP2_ACC_DRDY_MASK GENMASK(11, 10)
+#define SMI330_INT_MAP2_GYR_DRDY_MASK GENMASK(9, 8)
+#define SMI330_INT_MAP2_FIFO_MASK \
+ (SMI330_INT_MAP2_FIFO_FULL_MASK | SMI330_INT_MAP2_FIFO_WM_MASK)
+#define SMI330_INT_MAP2_DRDY_MASK \
+ (SMI330_INT_MAP2_ACC_DRDY_MASK | SMI330_INT_MAP2_GYR_DRDY_MASK)
+#define SMI330_FEATURE_DATA_STATUS_TX_READY_MASK BIT(1)
+
+/* Register values */
+#define SMI330_FEATURE_IO2_STARTUP_CONFIG 0x012C
+#define SMI330_IO_INT_CTRL_LVL BIT(0)
+#define SMI330_IO_INT_CTRL_OD BIT(1)
+#define SMI330_IO_INT_CTRL_EN BIT(2)
+#define SMI330_FEATURE_CTRL_ENABLE BIT(0)
+#define SMI330_CMD_SELF_CALIBRATION (BIT(0) | BIT(8))
+#define SMI330_CMD_SELF_TEST BIT(8)
+#define SMI330_CMD_SOFT_RESET 0xDEAF
+
+/* T°C = (temp / 512) + 23 */
+#define SMI330_TEMP_OFFSET 11776 /* 23 * 512 */
+#define SMI330_TEMP_SCALE 1953125 /* (1 / 512) * 1e9 */
+
+enum {
+ SMI330_SCAN_ACCEL_X,
+ SMI330_SCAN_ACCEL_Y,
+ SMI330_SCAN_ACCEL_Z,
+ SMI330_SCAN_GYRO_X,
+ SMI330_SCAN_GYRO_Y,
+ SMI330_SCAN_GYRO_Z,
+ SMI330_SCAN_TEMPERATURE,
+ SMI330_SCAN_TIMESTAMP,
+ SMI330_SCAN_LEN,
+};
+
+enum smi330_accel_range {
+ SMI330_ACCEL_RANGE_2G = 0x00,
+ SMI330_ACCEL_RANGE_4G = 0x01,
+ SMI330_ACCEL_RANGE_8G = 0x02,
+ SMI330_ACCEL_RANGE_16G = 0x03
+};
+
+enum smi330_gyro_range {
+ SMI330_GYRO_RANGE_125 = 0x0,
+ SMI330_GYRO_RANGE_250 = 0x01,
+ SMI330_GYRO_RANGE_500 = 0x02
+};
+
+enum smi330_odr {
+ SMI330_ODR_12_5_HZ = 0x05,
+ SMI330_ODR_25_HZ = 0x06,
+ SMI330_ODR_50_HZ = 0x07,
+ SMI330_ODR_100_HZ = 0x08,
+ SMI330_ODR_200_HZ = 0x09,
+ SMI330_ODR_400_HZ = 0x0A,
+ SMI330_ODR_800_HZ = 0x0B,
+ SMI330_ODR_1600_HZ = 0x0C,
+ SMI330_ODR_3200_HZ = 0x0D,
+ SMI330_ODR_6400_HZ = 0x0E
+};
+
+enum smi330_avg_num {
+ SMI330_AVG_NUM_1 = 0x00,
+ SMI330_AVG_NUM_2 = 0x01,
+ SMI330_AVG_NUM_4 = 0x02,
+ SMI330_AVG_NUM_8 = 0x03,
+ SMI330_AVG_NUM_16 = 0x04,
+ SMI330_AVG_NUM_32 = 0x05,
+ SMI330_AVG_NUM_64 = 0x06
+};
+
+enum smi330_mode {
+ SMI330_MODE_SUSPEND = 0x00,
+ SMI330_MODE_GYRO_DRIVE = 0x01,
+ SMI330_MODE_LOW_POWER = 0x03,
+ SMI330_MODE_NORMAL = 0x04,
+ SMI330_MODE_HIGH_PERF = 0x07
+};
+
+enum smi330_bw {
+ SMI330_BW_2 = 0x00, /* ODR/2 */
+ SMI330_BW_4 = 0x01 /* ODR/4 */
+};
+
+enum smi330_operation_mode {
+ SMI330_POLLING,
+ SMI330_DATA_READY,
+};
+
+enum smi330_sensor {
+ SMI330_ACCEL,
+ SMI330_GYRO,
+};
+
+enum smi330_sensor_conf_select {
+ SMI330_ODR,
+ SMI330_RANGE,
+ SMI330_BW,
+ SMI330_AVG_NUM,
+};
+
+enum smi330_int_out {
+ SMI330_INT_DISABLED,
+ SMI330_INT_1,
+ SMI330_INT_2,
+};
+
+struct smi330_attributes {
+ int *reg_vals;
+ int *vals;
+ int len;
+ int type;
+ int mask;
+};
+
+struct smi330_cfg {
+ enum smi330_operation_mode op_mode;
+ enum smi330_int_out data_irq;
+};
+
+struct smi330_data {
+ struct regmap *regmap;
+ struct smi330_cfg cfg;
+ struct iio_trigger *trig;
+ IIO_DECLARE_BUFFER_WITH_TS(s16, buf, SMI330_SCAN_LEN);
+};
+
+int smi330_core_probe(struct device *dev, struct regmap *regmap);
+
+#endif /* _SMI330_H */
diff --git a/drivers/iio/imu/smi330/smi330_core.c b/drivers/iio/imu/smi330/smi330_core.c
new file mode 100644
index 00000000000..23e65c1ed64
--- /dev/null
+++ b/drivers/iio/imu/smi330/smi330_core.c
@@ -0,0 +1,779 @@
+// SPDX-License-Identifier: BSD-3-Clause OR GPL-2.0
+/*
+ * Copyright (c) 2025 Robert Bosch GmbH.
+ */
+#include <linux/bitfield.h>
+#include <linux/delay.h>
+#include <linux/interrupt.h>
+#include <linux/irq.h>
+#include <linux/module.h>
+#include <linux/property.h>
+#include <linux/regmap.h>
+#include <linux/string.h>
+#include <linux/units.h>
+
+#include <linux/iio/buffer.h>
+#include <linux/iio/iio.h>
+#include <linux/iio/trigger.h>
+#include <linux/iio/trigger_consumer.h>
+#include <linux/iio/triggered_buffer.h>
+
+#include "smi330.h"
+
+#define SMI330_ACCEL_CHANNEL(_type, _axis, _index) { \
+ .type = _type, \
+ .modified = 1, \
+ .channel2 = IIO_MOD_##_axis, \
+ .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
+ .info_mask_shared_by_type = \
+ BIT(IIO_CHAN_INFO_SCALE) | \
+ BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO) | \
+ BIT(IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY), \
+ .info_mask_shared_by_type_available = \
+ BIT(IIO_CHAN_INFO_SCALE) | \
+ BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO) | \
+ BIT(IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY), \
+ .info_mask_shared_by_dir = \
+ BIT(IIO_CHAN_INFO_SAMP_FREQ), \
+ .info_mask_shared_by_dir_available = \
+ BIT(IIO_CHAN_INFO_SAMP_FREQ), \
+ .scan_index = _index, \
+ .scan_type = { \
+ .sign = 's', \
+ .realbits = 16, \
+ .storagebits = 16, \
+ .endianness = IIO_LE, \
+ }, \
+}
+
+#define SMI330_GYRO_CHANNEL(_type, _axis, _index) { \
+ .type = _type, \
+ .modified = 1, \
+ .channel2 = IIO_MOD_##_axis, \
+ .info_mask_separate = BIT(IIO_CHAN_INFO_RAW), \
+ .info_mask_shared_by_type = \
+ BIT(IIO_CHAN_INFO_SCALE) | \
+ BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO) | \
+ BIT(IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY), \
+ .info_mask_shared_by_type_available = \
+ BIT(IIO_CHAN_INFO_SCALE) | \
+ BIT(IIO_CHAN_INFO_OVERSAMPLING_RATIO) | \
+ BIT(IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY), \
+ .info_mask_shared_by_dir = \
+ BIT(IIO_CHAN_INFO_SAMP_FREQ), \
+ .info_mask_shared_by_dir_available = \
+ BIT(IIO_CHAN_INFO_SAMP_FREQ), \
+ .scan_index = _index, \
+ .scan_type = { \
+ .sign = 's', \
+ .realbits = 16, \
+ .storagebits = 16, \
+ .endianness = IIO_LE, \
+ }, \
+}
+
+#define SMI330_TEMP_CHANNEL(_index) { \
+ .type = IIO_TEMP, \
+ .info_mask_separate = BIT(IIO_CHAN_INFO_RAW) | \
+ BIT(IIO_CHAN_INFO_OFFSET) | \
+ BIT(IIO_CHAN_INFO_SCALE), \
+ .scan_index = _index, \
+ .scan_type = { \
+ .sign = 's', \
+ .realbits = 16, \
+ .storagebits = 16, \
+ .endianness = IIO_LE, \
+ }, \
+}
+
+static const struct iio_chan_spec smi330_channels[] = {
+ SMI330_ACCEL_CHANNEL(IIO_ACCEL, X, SMI330_SCAN_ACCEL_X),
+ SMI330_ACCEL_CHANNEL(IIO_ACCEL, Y, SMI330_SCAN_ACCEL_Y),
+ SMI330_ACCEL_CHANNEL(IIO_ACCEL, Z, SMI330_SCAN_ACCEL_Z),
+ SMI330_GYRO_CHANNEL(IIO_ANGL_VEL, X, SMI330_SCAN_GYRO_X),
+ SMI330_GYRO_CHANNEL(IIO_ANGL_VEL, Y, SMI330_SCAN_GYRO_Y),
+ SMI330_GYRO_CHANNEL(IIO_ANGL_VEL, Z, SMI330_SCAN_GYRO_Z),
+ SMI330_TEMP_CHANNEL(SMI330_SCAN_TEMPERATURE),
+ IIO_CHAN_SOFT_TIMESTAMP(SMI330_SCAN_TIMESTAMP),
+};
+
+static const struct smi330_attributes smi330_accel_scale_attr = {
+ .reg_vals = (int[]){ SMI330_ACCEL_RANGE_2G, SMI330_ACCEL_RANGE_4G,
+ SMI330_ACCEL_RANGE_8G, SMI330_ACCEL_RANGE_16G },
+ .vals = (int[]){ 0, 61035, 0, 122070, 0, 244140, 0, 488281 },
+ .len = 8,
+ .type = IIO_VAL_INT_PLUS_NANO,
+ .mask = SMI330_CFG_RANGE_MASK
+};
+
+static const struct smi330_attributes smi330_gyro_scale_attr = {
+ .reg_vals = (int[]){ SMI330_GYRO_RANGE_125, SMI330_GYRO_RANGE_250,
+ SMI330_GYRO_RANGE_500 },
+ .vals = (int[]){ 0, 3814697, 0, 7629395, 0, 15258789 },
+ .len = 6,
+ .type = IIO_VAL_INT_PLUS_NANO,
+ .mask = SMI330_CFG_RANGE_MASK
+};
+
+static const struct smi330_attributes smi330_average_attr = {
+ .reg_vals = (int[]){ SMI330_AVG_NUM_1, SMI330_AVG_NUM_2,
+ SMI330_AVG_NUM_4, SMI330_AVG_NUM_8,
+ SMI330_AVG_NUM_16, SMI330_AVG_NUM_32,
+ SMI330_AVG_NUM_64 },
+ .vals = (int[]){ 1, 2, 4, 8, 16, 32, 64 },
+ .len = 7,
+ .type = IIO_VAL_INT,
+ .mask = SMI330_CFG_AVG_NUM_MASK
+};
+
+static const struct smi330_attributes smi330_bandwidth_attr = {
+ .reg_vals = (int[]){ SMI330_BW_2, SMI330_BW_4 },
+ .vals = (int[]){ 2, 4 },
+ .len = 2,
+ .type = IIO_VAL_INT,
+ .mask = SMI330_CFG_BW_MASK
+};
+
+static const struct smi330_attributes smi330_odr_attr = {
+ .reg_vals = (int[]){ SMI330_ODR_12_5_HZ, SMI330_ODR_25_HZ,
+ SMI330_ODR_50_HZ, SMI330_ODR_100_HZ,
+ SMI330_ODR_200_HZ, SMI330_ODR_400_HZ,
+ SMI330_ODR_800_HZ, SMI330_ODR_1600_HZ,
+ SMI330_ODR_3200_HZ, SMI330_ODR_6400_HZ },
+ .vals = (int[]){ 12, 25, 50, 100, 200, 400, 800, 1600, 3200, 6400 },
+ .len = 10,
+ .type = IIO_VAL_INT,
+ .mask = SMI330_CFG_ODR_MASK
+};
+
+static int smi330_get_attributes(enum smi330_sensor_conf_select config,
+ enum smi330_sensor sensor,
+ const struct smi330_attributes **attr)
+{
+ switch (config) {
+ case SMI330_ODR:
+ *attr = &smi330_odr_attr;
+ return 0;
+ case SMI330_RANGE:
+ if (sensor == SMI330_ACCEL)
+ *attr = &smi330_accel_scale_attr;
+ else
+ *attr = &smi330_gyro_scale_attr;
+ return 0;
+ case SMI330_BW:
+ *attr = &smi330_bandwidth_attr;
+ return 0;
+ case SMI330_AVG_NUM:
+ *attr = &smi330_average_attr;
+ return 0;
+ default:
+ return -EINVAL;
+ }
+}
+
+static int smi330_get_config_reg(enum smi330_sensor sensor, int *reg)
+{
+ switch (sensor) {
+ case SMI330_ACCEL:
+ *reg = SMI330_ACCEL_CFG_REG;
+ return 0;
+ case SMI330_GYRO:
+ *reg = SMI330_GYRO_CFG_REG;
+ return 0;
+ default:
+ return -EINVAL;
+ }
+}
+
+static int smi330_get_sensor_config(struct smi330_data *data,
+ enum smi330_sensor sensor,
+ enum smi330_sensor_conf_select config,
+ int *value)
+
+{
+ int ret, reg, reg_val, i;
+ const struct smi330_attributes *attr;
+
+ ret = smi330_get_config_reg(sensor, ®);
+ if (ret)
+ return ret;
+
+ ret = regmap_read(data->regmap, reg, ®_val);
+ if (ret)
+ return ret;
+
+ ret = smi330_get_attributes(config, sensor, &attr);
+ if (ret)
+ return ret;
+
+ /* FIELD_GET is not possible with non-const mask */
+ reg_val = (reg_val & attr->mask) >> (__builtin_ffs(attr->mask) - 1);
+
+ if (attr->type == IIO_VAL_INT) {
+ for (i = 0; i < attr->len; i++) {
+ if (attr->reg_vals[i] == reg_val) {
+ *value = attr->vals[i];
+ return 0;
+ }
+ }
+ } else {
+ for (i = 0; i < attr->len / 2; i++) {
+ if (attr->reg_vals[i] == reg_val) {
+ *value = attr->vals[2 * i + 1];
+ return 0;
+ }
+ }
+ }
+
+ return -EINVAL;
+}
+
+static int smi330_set_sensor_config(struct smi330_data *data,
+ enum smi330_sensor sensor,
+ enum smi330_sensor_conf_select config,
+ int value)
+{
+ int ret, i, reg, reg_val, error;
+ const struct smi330_attributes *attr;
+
+ ret = smi330_get_attributes(config, sensor, &attr);
+ if (ret)
+ return ret;
+
+ for (i = 0; i < attr->len; i++) {
+ if (attr->vals[i] == value) {
+ if (attr->type == IIO_VAL_INT)
+ reg_val = attr->reg_vals[i];
+ else
+ reg_val = attr->reg_vals[i / 2];
+ break;
+ }
+ }
+ if (i == attr->len)
+ return -EINVAL;
+
+ ret = smi330_get_config_reg(sensor, ®);
+ if (ret)
+ return ret;
+
+ /* FIELD_PREP is not possible with non-const mask */
+ reg_val = ((reg_val << (__builtin_ffs(attr->mask) - 1)) & attr->mask);
+
+ ret = regmap_update_bits(data->regmap, reg, attr->mask, reg_val);
+ if (ret)
+ return ret;
+
+ ret = regmap_read(data->regmap, SMI330_ERR_REG, &error);
+ if (ret)
+ return ret;
+
+ if (FIELD_GET(SMI330_ERR_ACC_CONF_MASK, error) ||
+ FIELD_GET(SMI330_ERR_GYR_CONF_MASK, error))
+ return -EIO;
+
+ return 0;
+}
+
+static int smi330_get_data(struct smi330_data *data, int chan_type, int axis,
+ int *val)
+{
+ u8 reg;
+ int ret, sample;
+
+ switch (chan_type) {
+ case IIO_ACCEL:
+ reg = SMI330_ACCEL_X_REG + (axis - IIO_MOD_X);
+ break;
+ case IIO_ANGL_VEL:
+ reg = SMI330_GYRO_X_REG + (axis - IIO_MOD_X);
+ break;
+ case IIO_TEMP:
+ reg = SMI330_TEMP_REG;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ ret = regmap_read(data->regmap, reg, &sample);
+ if (ret)
+ return ret;
+
+ *val = sign_extend32(sample, 15);
+
+ return 0;
+}
+
+static int smi330_read_avail(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan, const int **vals,
+ int *type, int *length, long mask)
+{
+ switch (mask) {
+ case IIO_CHAN_INFO_SCALE:
+ if (chan->type == IIO_ACCEL) {
+ *vals = smi330_accel_scale_attr.vals;
+ *length = smi330_accel_scale_attr.len;
+ *type = smi330_accel_scale_attr.type;
+ } else {
+ *vals = smi330_gyro_scale_attr.vals;
+ *length = smi330_gyro_scale_attr.len;
+ *type = smi330_gyro_scale_attr.type;
+ }
+ return IIO_AVAIL_LIST;
+ case IIO_CHAN_INFO_OVERSAMPLING_RATIO:
+ *vals = smi330_average_attr.vals;
+ *length = smi330_average_attr.len;
+ *type = smi330_average_attr.type;
+ *type = IIO_VAL_INT;
+ return IIO_AVAIL_LIST;
+ case IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY:
+ *vals = smi330_bandwidth_attr.vals;
+ *length = smi330_bandwidth_attr.len;
+ *type = smi330_bandwidth_attr.type;
+ return IIO_AVAIL_LIST;
+ case IIO_CHAN_INFO_SAMP_FREQ:
+ *vals = smi330_odr_attr.vals;
+ *length = smi330_odr_attr.len;
+ *type = smi330_odr_attr.type;
+ return IIO_AVAIL_LIST;
+ default:
+ return -EINVAL;
+ }
+
+ return -EINVAL;
+}
+
+static int smi330_read_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan, int *val,
+ int *val2, long mask)
+{
+ int ret;
+ struct smi330_data *data = iio_priv(indio_dev);
+ enum smi330_sensor sensor;
+
+ /* valid for all channel types */
+ switch (mask) {
+ case IIO_CHAN_INFO_RAW:
+ if (!iio_device_claim_direct(indio_dev))
+ return -EBUSY;
+ ret = smi330_get_data(data, chan->type, chan->channel2, val);
+ iio_device_release_direct(indio_dev);
+ return ret ? ret : IIO_VAL_INT;
+ default:
+ break;
+ }
+
+ switch (chan->type) {
+ case IIO_ACCEL:
+ sensor = SMI330_ACCEL;
+ break;
+ case IIO_ANGL_VEL:
+ sensor = SMI330_GYRO;
+ break;
+ case IIO_TEMP:
+ switch (mask) {
+ case IIO_CHAN_INFO_SCALE:
+ *val = SMI330_TEMP_SCALE / GIGA;
+ *val2 = SMI330_TEMP_SCALE % GIGA;
+ return IIO_VAL_INT_PLUS_NANO;
+ case IIO_CHAN_INFO_OFFSET:
+ *val = SMI330_TEMP_OFFSET;
+ return IIO_VAL_INT;
+ default:
+ return -EINVAL;
+ }
+ default:
+ return -EINVAL;
+ }
+
+ /* valid for acc and gyro channels */
+ switch (mask) {
+ case IIO_CHAN_INFO_OVERSAMPLING_RATIO:
+ ret = smi330_get_sensor_config(data, sensor, SMI330_AVG_NUM,
+ val);
+ return ret ? ret : IIO_VAL_INT;
+
+ case IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY:
+ ret = smi330_get_sensor_config(data, sensor, SMI330_BW, val);
+ return ret ? ret : IIO_VAL_INT;
+
+ case IIO_CHAN_INFO_SAMP_FREQ:
+ ret = smi330_get_sensor_config(data, sensor, SMI330_ODR, val);
+ return ret ? ret : IIO_VAL_INT;
+
+ case IIO_CHAN_INFO_SCALE:
+ *val = 0;
+ ret = smi330_get_sensor_config(data, sensor, SMI330_RANGE,
+ val2);
+ return ret ? ret : IIO_VAL_INT_PLUS_NANO;
+
+ default:
+ return -EINVAL;
+ }
+}
+
+static int smi330_write_raw(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan, int val, int val2,
+ long mask)
+{
+ int ret;
+ struct smi330_data *data = iio_priv(indio_dev);
+ enum smi330_sensor sensor;
+
+ switch (chan->type) {
+ case IIO_ACCEL:
+ sensor = SMI330_ACCEL;
+ break;
+ case IIO_ANGL_VEL:
+ sensor = SMI330_GYRO;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ switch (mask) {
+ case IIO_CHAN_INFO_SCALE:
+ return smi330_set_sensor_config(data, sensor, SMI330_RANGE,
+ val2);
+ case IIO_CHAN_INFO_OVERSAMPLING_RATIO:
+ return smi330_set_sensor_config(data, sensor, SMI330_AVG_NUM,
+ val);
+ case IIO_CHAN_INFO_LOW_PASS_FILTER_3DB_FREQUENCY:
+ return smi330_set_sensor_config(data, sensor, SMI330_BW, val);
+ case IIO_CHAN_INFO_SAMP_FREQ:
+ ret = smi330_set_sensor_config(data, SMI330_ACCEL, SMI330_ODR,
+ val);
+ if (ret)
+ return ret;
+
+ return smi330_set_sensor_config(data, SMI330_GYRO, SMI330_ODR,
+ val);
+ default:
+ return -EINVAL;
+ }
+}
+
+static int smi330_write_raw_get_fmt(struct iio_dev *indio_dev,
+ struct iio_chan_spec const *chan, long info)
+{
+ switch (info) {
+ case IIO_CHAN_INFO_SCALE:
+ return IIO_VAL_INT_PLUS_NANO;
+ default:
+ return IIO_VAL_INT_PLUS_MICRO;
+ }
+}
+
+static int smi330_soft_reset(struct smi330_data *data)
+{
+ int ret, dummy_byte;
+
+ ret = regmap_write(data->regmap, SMI330_CMD_REG, SMI330_CMD_SOFT_RESET);
+ if (ret)
+ return ret;
+ fsleep(SMI330_SOFT_RESET_DELAY);
+
+ /* Performing a dummy read after a soft-reset */
+ regmap_read(data->regmap, SMI330_CHIP_ID_REG, &dummy_byte);
+
+ return 0;
+}
+
+static irqreturn_t smi330_trigger_handler(int irq, void *p)
+{
+ struct iio_poll_func *pf = p;
+ struct iio_dev *indio_dev = pf->indio_dev;
+ struct smi330_data *data = iio_priv(indio_dev);
+ int ret, chan;
+ int i = 0;
+
+ ret = regmap_bulk_read(data->regmap, SMI330_ACCEL_X_REG, data->buf,
+ ARRAY_SIZE(smi330_channels));
+ if (ret)
+ goto out;
+
+ if (*indio_dev->active_scan_mask != SMI330_ALL_CHAN_MSK) {
+ iio_for_each_active_channel(indio_dev, chan)
+ data->buf[i++] = data->buf[chan];
+ }
+
+ iio_push_to_buffers_with_timestamp(indio_dev, data->buf, pf->timestamp);
+
+out:
+ iio_trigger_notify_done(indio_dev->trig);
+
+ return IRQ_HANDLED;
+}
+
+static irqreturn_t smi330_irq_thread_handler(int irq, void *indio_dev_)
+{
+ int ret, int_stat;
+ s16 int_status[2] = { 0 };
+ struct iio_dev *indio_dev = indio_dev_;
+ struct smi330_data *data = iio_priv(indio_dev);
+
+ ret = regmap_bulk_read(data->regmap, SMI330_INT1_STATUS_REG, int_status, 2);
+ if (ret)
+ return IRQ_NONE;
+
+ int_stat = int_status[0] | int_status[1];
+
+ if (FIELD_GET(SMI330_INT_STATUS_ACC_GYR_DRDY_MASK, int_stat)) {
+ indio_dev->pollfunc->timestamp = iio_get_time_ns(indio_dev);
+ iio_trigger_poll_nested(data->trig);
+ }
+
+ return IRQ_HANDLED;
+}
+
+static int smi330_set_int_pin_config(struct smi330_data *data,
+ enum smi330_int_out irq_num,
+ bool active_high, bool open_drain,
+ bool latch)
+{
+ int ret, val;
+
+ val = active_high ? SMI330_IO_INT_CTRL_LVL : 0;
+ val |= open_drain ? SMI330_IO_INT_CTRL_OD : 0;
+ val |= SMI330_IO_INT_CTRL_EN;
+
+ switch (irq_num) {
+ case SMI330_INT_1:
+ val = FIELD_PREP(SMI330_IO_INT_CTRL_INT1_MASK, val);
+ ret = regmap_update_bits(data->regmap, SMI330_IO_INT_CTRL_REG,
+ SMI330_IO_INT_CTRL_INT1_MASK, val);
+ if (ret)
+ return ret;
+ break;
+ case SMI330_INT_2:
+ val = FIELD_PREP(SMI330_IO_INT_CTRL_INT2_MASK, val);
+ ret = regmap_update_bits(data->regmap, SMI330_IO_INT_CTRL_REG,
+ SMI330_IO_INT_CTRL_INT2_MASK, val);
+ if (ret)
+ return ret;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ return regmap_update_bits(data->regmap, SMI330_INT_CONF_REG,
+ SMI330_INT_CONF_LATCH_MASK,
+ FIELD_PREP(SMI330_INT_CONF_LATCH_MASK,
+ latch));
+}
+
+static int smi330_setup_irq(struct device *dev, struct iio_dev *indio_dev,
+ int irq, enum smi330_int_out irq_num)
+{
+ int ret, irq_type;
+ bool open_drain, active_high, latch;
+ struct smi330_data *data = iio_priv(indio_dev);
+ struct irq_data *desc;
+
+ desc = irq_get_irq_data(irq);
+ if (!desc)
+ return -EINVAL;
+
+ irq_type = irqd_get_trigger_type(desc);
+ switch (irq_type) {
+ case IRQF_TRIGGER_RISING:
+ latch = false;
+ active_high = true;
+ break;
+ case IRQF_TRIGGER_HIGH:
+ latch = true;
+ active_high = true;
+ break;
+ case IRQF_TRIGGER_FALLING:
+ latch = false;
+ active_high = false;
+ break;
+ case IRQF_TRIGGER_LOW:
+ latch = true;
+ active_high = false;
+ break;
+ default:
+ return -EINVAL;
+ }
+
+ open_drain = device_property_read_bool(dev, "drive-open-drain");
+
+ ret = smi330_set_int_pin_config(data, irq_num, active_high, open_drain,
+ latch);
+ if (ret)
+ return ret;
+
+ return devm_request_threaded_irq(dev, irq, NULL,
+ smi330_irq_thread_handler,
+ irq_type | IRQF_ONESHOT,
+ indio_dev->name, indio_dev);
+}
+
+static int smi330_register_irq(struct device *dev, struct iio_dev *indio_dev)
+{
+ int ret, irq;
+ struct smi330_data *data = iio_priv(indio_dev);
+ struct fwnode_handle *fwnode;
+
+ fwnode = dev_fwnode(dev);
+ if (!fwnode)
+ return -ENODEV;
+
+ data->cfg.data_irq = SMI330_INT_DISABLED;
+
+ irq = fwnode_irq_get_byname(fwnode, "INT1");
+ if (irq > 0) {
+ ret = smi330_setup_irq(dev, indio_dev, irq, SMI330_INT_1);
+ if (ret)
+ return ret;
+ data->cfg.data_irq = SMI330_INT_1;
+ } else {
+ irq = fwnode_irq_get_byname(fwnode, "INT2");
+ if (irq > 0) {
+ ret = smi330_setup_irq(dev, indio_dev, irq,
+ SMI330_INT_2);
+ if (ret)
+ return ret;
+ data->cfg.data_irq = SMI330_INT_2;
+ }
+ }
+
+ return 0;
+}
+
+static int smi330_set_drdy_trigger_state(struct iio_trigger *trig, bool enable)
+{
+ int val;
+ struct smi330_data *data = iio_trigger_get_drvdata(trig);
+
+ if (enable)
+ data->cfg.op_mode = SMI330_DATA_READY;
+ else
+ data->cfg.op_mode = SMI330_POLLING;
+
+ val = FIELD_PREP(SMI330_INT_MAP2_ACC_DRDY_MASK,
+ enable ? data->cfg.data_irq : 0);
+ val |= FIELD_PREP(SMI330_INT_MAP2_GYR_DRDY_MASK,
+ enable ? data->cfg.data_irq : 0);
+ return regmap_update_bits(data->regmap, SMI330_INT_MAP2_REG,
+ SMI330_INT_MAP2_DRDY_MASK, val);
+}
+
+static const struct iio_trigger_ops smi330_trigger_ops = {
+ .set_trigger_state = &smi330_set_drdy_trigger_state,
+};
+
+static struct iio_info smi330_info = {
+ .read_avail = smi330_read_avail,
+ .read_raw = smi330_read_raw,
+ .write_raw = smi330_write_raw,
+ .write_raw_get_fmt = smi330_write_raw_get_fmt,
+};
+
+static int smi330_dev_init(struct smi330_data *data)
+{
+ int ret, chip_id, val, mode;
+ struct device *dev = regmap_get_device(data->regmap);
+
+ ret = regmap_read(data->regmap, SMI330_CHIP_ID_REG, &chip_id);
+ if (ret)
+ return ret;
+
+ chip_id &= 0x00FF;
+
+ if (chip_id != SMI330_CHIP_ID)
+ dev_info(dev, "Unknown chip id: 0x%04x\n", chip_id);
+
+ ret = regmap_read(data->regmap, SMI330_ERR_REG, &val);
+ if (ret)
+ return ret;
+ if (FIELD_GET(SMI330_ERR_FATAL_MASK, val))
+ return -ENODEV;
+
+ ret = regmap_read(data->regmap, SMI330_STATUS_REG, &val);
+ if (ret)
+ return ret;
+ if (FIELD_GET(SMI330_STATUS_POR_MASK, val) == 0)
+ return -ENODEV;
+
+ mode = FIELD_PREP(SMI330_CFG_MODE_MASK, SMI330_MODE_NORMAL);
+
+ ret = regmap_update_bits(data->regmap, SMI330_ACCEL_CFG_REG,
+ SMI330_CFG_MODE_MASK, mode);
+ if (ret)
+ return ret;
+
+ return regmap_update_bits(data->regmap, SMI330_GYRO_CFG_REG,
+ SMI330_CFG_MODE_MASK, mode);
+}
+
+int smi330_core_probe(struct device *dev, struct regmap *regmap)
+{
+ int ret;
+ struct iio_dev *indio_dev;
+ struct smi330_data *data;
+
+ indio_dev = devm_iio_device_alloc(dev, sizeof(*data));
+ if (!indio_dev)
+ return -ENOMEM;
+
+ data = iio_priv(indio_dev);
+ data->regmap = regmap;
+
+ ret = smi330_soft_reset(data);
+ if (ret)
+ return dev_err_probe(dev, ret, "Soft reset failed\n");
+
+ indio_dev->channels = smi330_channels;
+ indio_dev->num_channels = ARRAY_SIZE(smi330_channels);
+ indio_dev->name = "smi330";
+ indio_dev->modes = INDIO_DIRECT_MODE;
+ indio_dev->info = &smi330_info;
+
+ data->cfg.op_mode = SMI330_POLLING;
+
+ ret = smi330_dev_init(data);
+ if (ret)
+ return dev_err_probe(dev, ret, "Init failed\n");
+
+ ret = smi330_register_irq(dev, indio_dev);
+ if (ret)
+ return dev_err_probe(dev, ret, "Register IRQ failed\n");
+
+ if (data->cfg.data_irq != SMI330_INT_DISABLED) {
+ data->trig = devm_iio_trigger_alloc(dev, "%s-drdy-trigger",
+ indio_dev->name);
+ if (!data->trig)
+ return -ENOMEM;
+
+ data->trig->ops = &smi330_trigger_ops;
+ iio_trigger_set_drvdata(data->trig, data);
+
+ ret = devm_iio_trigger_register(dev, data->trig);
+ if (ret)
+ return dev_err_probe(dev, ret,
+ "IIO register trigger failed\n");
+
+ /* Set default operation mode to data ready. */
+ indio_dev->trig = iio_trigger_get(data->trig);
+ }
+
+ ret = devm_iio_triggered_buffer_setup(dev, indio_dev,
+ iio_pollfunc_store_time,
+ smi330_trigger_handler, NULL);
+ if (ret)
+ return dev_err_probe(dev, ret, "IIO buffer setup failed\n");
+
+ ret = devm_iio_device_register(dev, indio_dev);
+ if (ret)
+ return dev_err_probe(dev, ret, "Register IIO device failed\n");
+
+ return 0;
+}
+EXPORT_SYMBOL_NS_GPL(smi330_core_probe, "IIO_SMI330");
+
+MODULE_AUTHOR("Stefan Gutmann <stefan.gutmann@...bosch.com>");
+MODULE_AUTHOR("Roman Huber <roman.huber@...bosch.com>");
+MODULE_AUTHOR("Filip Andrei <Andrei.Filip@...bosch.com>");
+MODULE_AUTHOR("Drimbarean Avram Andrei <Avram-Andrei.Drimbarean@...bosch.com>");
+MODULE_DESCRIPTION("Bosch SMI330 IMU driver");
+MODULE_LICENSE("Dual BSD/GPL");
diff --git a/drivers/iio/imu/smi330/smi330_i2c.c b/drivers/iio/imu/smi330/smi330_i2c.c
new file mode 100644
index 00000000000..76b88bbd7d2
--- /dev/null
+++ b/drivers/iio/imu/smi330/smi330_i2c.c
@@ -0,0 +1,136 @@
+// SPDX-License-Identifier: BSD-3-Clause OR GPL-2.0
+/*
+ * Copyright (c) 2025 Robert Bosch GmbH.
+ */
+#include <linux/i2c.h>
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/regmap.h>
+
+#include "smi330.h"
+
+#define SMI330_NUM_DUMMY_BYTES 2
+#define SMI330_I2C_MAX_RX_BUFFER_SIZE \
+ (SMI330_NUM_DUMMY_BYTES + SMI330_SCAN_LEN * sizeof(s16))
+
+struct smi330_i2c_priv {
+ struct i2c_client *i2c;
+ u8 rx_buffer[SMI330_I2C_MAX_RX_BUFFER_SIZE];
+};
+
+static int smi330_regmap_i2c_read(void *context, const void *reg_buf,
+ size_t reg_size, void *val_buf,
+ size_t val_size)
+{
+ struct smi330_i2c_priv *priv = context;
+ int ret, retry;
+
+ /*
+ * SMI330 I2C read frame:
+ * <Slave address[6:0], RnW> <x, Register address[6:0]>
+ * <Slave address[6:0], RnW> <Dummy[7:0]> <Dummy[7:0]> <Data_0[7:0]> <Data_1[15:8]>...
+ * <Data_N[7:0]> <Data_N[15:8]>
+ * Remark: Slave address is not considered part of the frame in the following definitions
+ */
+ struct i2c_msg msgs[] = {
+ {
+ .addr = priv->i2c->addr,
+ .flags = priv->i2c->flags,
+ .len = reg_size,
+ .buf = (u8 *)reg_buf,
+ },
+ {
+ .addr = priv->i2c->addr,
+ .flags = priv->i2c->flags | I2C_M_RD,
+ .len = SMI330_NUM_DUMMY_BYTES + val_size,
+ .buf = priv->rx_buffer,
+ },
+ };
+
+ ret = i2c_transfer(priv->i2c->adapter, msgs, ARRAY_SIZE(msgs));
+ if (ret < 0)
+ return ret;
+
+ memcpy(val_buf, priv->rx_buffer + SMI330_NUM_DUMMY_BYTES, val_size);
+
+ return 0;
+}
+
+static int smi330_regmap_i2c_write(void *context, const void *data,
+ size_t count)
+{
+ struct smi330_i2c_priv *priv = context;
+ u8 reg;
+
+ /*
+ * SMI330 I2C write frame:
+ * <Slave address[6:0], RnW> <x, Register address[6:0]> <Data_0[7:0]> <Data_1[15:8]>...
+ * <Data_N[7:0]> <Data_N[15:8]>
+ * Remark: Slave address is not considered part of the frame in the following definitions
+ */
+ reg = *(u8 *)data;
+ return i2c_smbus_write_i2c_block_data(priv->i2c, reg,
+ count - sizeof(u8),
+ data + sizeof(u8));
+}
+
+static const struct regmap_bus smi330_regmap_bus = {
+ .read = smi330_regmap_i2c_read,
+ .write = smi330_regmap_i2c_write,
+};
+
+static const struct regmap_config smi330_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 16,
+ .val_format_endian = REGMAP_ENDIAN_LITTLE,
+};
+
+static int smi330_i2c_probe(struct i2c_client *i2c)
+{
+ struct device *dev = &i2c->dev;
+ struct smi330_i2c_priv *priv;
+ struct regmap *regmap;
+
+ priv = devm_kzalloc(dev, sizeof(*priv), GFP_KERNEL);
+ if (!priv)
+ return -ENOMEM;
+
+ priv->i2c = i2c;
+ regmap = devm_regmap_init(dev, &smi330_regmap_bus, priv,
+ &smi330_regmap_config);
+ if (IS_ERR(regmap))
+ return dev_err_probe(dev, PTR_ERR(regmap),
+ "Failed to initialize I2C Regmap\n");
+
+ return smi330_core_probe(dev, regmap);
+}
+
+static const struct i2c_device_id smi330_i2c_device_id[] = {
+ { .name = "smi330" },
+ { }
+};
+MODULE_DEVICE_TABLE(i2c, smi330_i2c_device_id);
+
+static const struct of_device_id smi330_of_match[] = {
+ { .compatible = "bosch,smi330" },
+ { }
+};
+MODULE_DEVICE_TABLE(of, smi330_of_match);
+
+static struct i2c_driver smi330_i2c_driver = {
+ .probe = smi330_i2c_probe,
+ .id_table = smi330_i2c_device_id,
+ .driver = {
+ .of_match_table = smi330_of_match,
+ .name = "smi330_i2c",
+ },
+};
+module_i2c_driver(smi330_i2c_driver);
+
+MODULE_AUTHOR("Stefan Gutmann <stefan.gutmann@...bosch.com>");
+MODULE_AUTHOR("Roman Huber <roman.huber@...bosch.com>");
+MODULE_AUTHOR("Filip Andrei <Andrei.Filip@...bosch.com>");
+MODULE_AUTHOR("Drimbarean Avram Andrei <Avram-Andrei.Drimbarean@...bosch.com>");
+MODULE_DESCRIPTION("Bosch SMI330 I2C driver");
+MODULE_LICENSE("Dual BSD/GPL");
+MODULE_IMPORT_NS("IIO_SMI330");
diff --git a/drivers/iio/imu/smi330/smi330_spi.c b/drivers/iio/imu/smi330/smi330_spi.c
new file mode 100644
index 00000000000..5b5aaaf0c5d
--- /dev/null
+++ b/drivers/iio/imu/smi330/smi330_spi.c
@@ -0,0 +1,91 @@
+// SPDX-License-Identifier: BSD-3-Clause OR GPL-2.0
+/*
+ * Copyright (c) 2025 Robert Bosch GmbH.
+ */
+#include <linux/module.h>
+#include <linux/of.h>
+#include <linux/regmap.h>
+#include <linux/spi/spi.h>
+
+#include "smi330.h"
+
+static int smi330_regmap_spi_read(void *context, const void *reg_buf,
+ size_t reg_size, void *val_buf,
+ size_t val_size)
+{
+ struct spi_device *spi = context;
+
+ /* Insert pad byte for reading */
+ u8 reg[] = { *(u8 *)reg_buf, 0 };
+
+ if (reg_size + 1 != ARRAY_SIZE(reg)) {
+ dev_err(&spi->dev, "Invalid register size %zu\n", reg_size);
+ return -EINVAL;
+ }
+
+ return spi_write_then_read(spi, reg, ARRAY_SIZE(reg), val_buf,
+ val_size);
+}
+
+static int smi330_regmap_spi_write(void *context, const void *data,
+ size_t count)
+{
+ struct spi_device *spi = context;
+
+ return spi_write(spi, data, count);
+}
+
+static const struct regmap_bus smi330_regmap_bus = {
+ .read = smi330_regmap_spi_read,
+ .write = smi330_regmap_spi_write,
+ .read_flag_mask = 0x80,
+};
+
+static const struct regmap_config smi330_regmap_config = {
+ .reg_bits = 8,
+ .val_bits = 16,
+ .val_format_endian = REGMAP_ENDIAN_LITTLE,
+};
+
+static int smi330_spi_probe(struct spi_device *spi)
+{
+ struct regmap *regmap;
+
+ regmap = devm_regmap_init(&spi->dev, &smi330_regmap_bus, &spi->dev,
+ &smi330_regmap_config);
+ if (IS_ERR(regmap))
+ return dev_err_probe(&spi->dev, PTR_ERR(regmap),
+ "Failed to initialize SPI Regmap\n");
+
+ return smi330_core_probe(&spi->dev, regmap);
+}
+
+static const struct spi_device_id smi330_spi_device_id[] = {
+ { .name = "smi330" },
+ { }
+};
+MODULE_DEVICE_TABLE(spi, smi330_spi_device_id);
+
+static const struct of_device_id smi330_of_match[] = {
+ { .compatible = "bosch,smi330" },
+ { }
+};
+MODULE_DEVICE_TABLE(of, smi330_of_match);
+
+static struct spi_driver smi330_spi_driver = {
+ .probe = smi330_spi_probe,
+ .id_table = smi330_spi_device_id,
+ .driver = {
+ .of_match_table = smi330_of_match,
+ .name = "smi330_spi",
+ },
+};
+module_spi_driver(smi330_spi_driver);
+
+MODULE_AUTHOR("Stefan Gutmann <stefan.gutmann@...bosch.com>");
+MODULE_AUTHOR("Roman Huber <roman.huber@...bosch.com>");
+MODULE_AUTHOR("Filip Andrei <Andrei.Filip@...bosch.com>");
+MODULE_AUTHOR("Drimbarean Avram Andrei <Avram-Andrei.Drimbarean@...bosch.com>");
+MODULE_DESCRIPTION("Bosch SMI330 SPI driver");
+MODULE_LICENSE("Dual BSD/GPL");
+MODULE_IMPORT_NS("IIO_SMI330");
--
2.34.1
Powered by blists - more mailing lists