Message-ID: <20250703083504.2394bc61@uranium>
Date: Thu, 3 Jul 2025 08:35:04 -0300
From: Flavio Leitner <fbl@...close.org>
To: Ilya Maximets <i.maximets@....org>
Cc: netdev@...r.kernel.org, dev@...nvswitch.org,
 linux-kernel@...r.kernel.org, Eric Dumazet <edumazet@...gle.com>, Simon
 Horman <horms@...nel.org>, Jakub Kicinski <kuba@...nel.org>, Paolo Abeni
 <pabeni@...hat.com>, "David S. Miller" <davem@...emloft.net>
Subject: Re: [ovs-dev] [PATCH net-next v2] net: openvswitch: allow providing
 upcall pid for the 'execute' command

On Wed,  2 Jul 2025 17:50:34 +0200
Ilya Maximets <i.maximets@....org> wrote:

> When a packet enters OVS datapath and there is no flow to handle it,
> packet goes to userspace through a MISS upcall.  With per-CPU upcall
> dispatch mechanism, we're using the current CPU id to select the
> Netlink PID on which to send this packet.  This allows us to send
> packets from the same traffic flow through the same handler.
> 
> The handler will process the packet, install required flow into the
> kernel and re-inject the original packet via OVS_PACKET_CMD_EXECUTE.
> 
> While handling OVS_PACKET_CMD_EXECUTE, however, we may hit a
> recirculation action that will pass the (likely modified) packet
> through the flow lookup again.  And if the flow is not found, the
> packet will be sent to userspace again through another MISS upcall.
> 
> However, the handler thread in userspace is likely running on a
> different CPU core, and the OVS_PACKET_CMD_EXECUTE request is handled
> in the syscall context of that thread.  So, when the time comes to
> send the packet through another upcall, the per-CPU dispatch will
> choose a different Netlink PID, and this packet will end up processed
> by a different handler thread on a different CPU.
> 
> The process continues as long as there are new recirculations, each
> time the packet goes to a different handler thread before it is sent
> out of the OVS datapath to the destination port.  In real setups the
> number of recirculations can go up to 4 or 5, sometimes more.
> 
> There is always a chance to re-order packets while processing upcalls,
> because userspace will first install the flow and then re-inject the
> original packet.  So, there is a race window when the flow is already
> installed and the second packet can match it and be forwarded to the
> destination before the first packet is re-injected.  But the fact that
> packets are going through multiple upcalls handled by different
> userspace threads makes the reordering noticeably more likely, because
> we not only have a race between the kernel and a userspace handler
> (which is hard to avoid), but also between multiple userspace handlers.
> 
> For example, let's assume that 10 packets got enqueued through a MISS
> upcall for handler-1, it will start processing them, will install the
> flow into the kernel and start re-injecting packets back, from where
> they will go through another MISS to handler-2.  Handler-2 will install
> the flow into the kernel and start re-injecting the packets, while
> handler-1 continues to re-inject the last of the 10 packets, they will
> hit the flow installed by handler-2 and be forwarded without going to
> the handler-2, while handler-2 still re-injects the first of these 10
> packets.  Given multiple recirculations and misses, these 10 packets
> may end up completely mixed up on the output from the datapath.
> 
> Let's allow userspace to specify on which Netlink PID the packets
> should be upcalled while processing OVS_PACKET_CMD_EXECUTE.
> This makes it possible to ensure that all the packets are processed
> by the same handler thread in the userspace even with them being
> upcalled multiple times in the process.  Packets will remain in order
> since they will be enqueued to the same socket and re-injected in the
> same order.  This doesn't eliminate re-ordering as stated above, since
> we still have a race between kernel and the userspace thread, but it
> allows to eliminate races between multiple userspace threads.
> 
> Userspace knows the PID of the socket on which the original upcall is
> received, so there is no need to send it up from the kernel.
> 
> Solution requires storing the value somewhere for the duration of the
> packet processing.  There are two potential places for this: our skb
> extension or the per-CPU storage.  It's not clear which is better,
> so just following currently used scheme of storing this kind of things
> along the skb.  We still have a decent amount of space in the cb.
> 
> Signed-off-by: Ilya Maximets <i.maximets@....org>

Acked-by: Flavio Leitner <fbl@...close.org>
Thanks!


> ---
> 
> Version 2:
>   * Converted to use nla_get_u32_default() instead of plain-coding it.
> 
> Version 1:
>   *
> https://lore.kernel.org/netdev/20250627220219.1504221-1-i.maximets@ovn.org/
> 
>  include/uapi/linux/openvswitch.h | 6 ++++++
>  net/openvswitch/actions.c        | 6 ++++--
>  net/openvswitch/datapath.c       | 8 +++++++-
>  net/openvswitch/datapath.h       | 3 +++
>  net/openvswitch/vport.c          | 1 +
>  5 files changed, 21 insertions(+), 3 deletions(-)
> 
> diff --git a/include/uapi/linux/openvswitch.h
> b/include/uapi/linux/openvswitch.h index 3a701bd1f31b..3092c2c6f1d2 100644
> --- a/include/uapi/linux/openvswitch.h
> +++ b/include/uapi/linux/openvswitch.h
> @@ -186,6 +186,11 @@ enum ovs_packet_cmd {
>   * %OVS_PACKET_ATTR_USERSPACE action specify the Maximum received fragment
>   * size.
>   * @OVS_PACKET_ATTR_HASH: Packet hash info (e.g. hash, sw_hash and l4_hash
> in skb).
> + * @OVS_PACKET_ATTR_UPCALL_PID: Netlink PID to use for upcalls while
> + * processing %OVS_PACKET_CMD_EXECUTE.  Takes precedence over all other
> ways
> + * to determine the Netlink PID including %OVS_USERSPACE_ATTR_PID,
> + * %OVS_DP_ATTR_UPCALL_PID, %OVS_DP_ATTR_PER_CPU_PIDS and the
> + * %OVS_VPORT_ATTR_UPCALL_PID.
>   *
>   * These attributes follow the &struct ovs_header within the Generic
> Netlink
>   * payload for %OVS_PACKET_* commands.
> @@ -205,6 +210,7 @@ enum ovs_packet_attr {
>  	OVS_PACKET_ATTR_MRU,	    /* Maximum received IP fragment
> size. */ OVS_PACKET_ATTR_LEN,	    /* Packet size before truncation.
> */ OVS_PACKET_ATTR_HASH,	    /* Packet hash. */
> +	OVS_PACKET_ATTR_UPCALL_PID, /* u32 Netlink PID. */
>  	__OVS_PACKET_ATTR_MAX
>  };
>  
> diff --git a/net/openvswitch/actions.c b/net/openvswitch/actions.c
> index 3add108340bf..2832e0794197 100644
> --- a/net/openvswitch/actions.c
> +++ b/net/openvswitch/actions.c
> @@ -941,8 +941,10 @@ static int output_userspace(struct datapath *dp,
> struct sk_buff *skb, break;
>  
>  		case OVS_USERSPACE_ATTR_PID:
> -			if (dp->user_features &
> -			    OVS_DP_F_DISPATCH_UPCALL_PER_CPU)
> +			if (OVS_CB(skb)->upcall_pid)
> +				upcall.portid = OVS_CB(skb)->upcall_pid;
> +			else if (dp->user_features &
> +				 OVS_DP_F_DISPATCH_UPCALL_PER_CPU)
>  				upcall.portid =
>  				  ovs_dp_get_upcall_portid(dp,
>  							   smp_processor_id());
> diff --git a/net/openvswitch/datapath.c b/net/openvswitch/datapath.c
> index b990dc83504f..d5b6e2002bc1 100644
> --- a/net/openvswitch/datapath.c
> +++ b/net/openvswitch/datapath.c
> @@ -267,7 +267,9 @@ void ovs_dp_process_packet(struct sk_buff *skb, struct
> sw_flow_key *key) memset(&upcall, 0, sizeof(upcall));
>  		upcall.cmd = OVS_PACKET_CMD_MISS;
>  
> -		if (dp->user_features & OVS_DP_F_DISPATCH_UPCALL_PER_CPU)
> +		if (OVS_CB(skb)->upcall_pid)
> +			upcall.portid = OVS_CB(skb)->upcall_pid;
> +		else if (dp->user_features &
> OVS_DP_F_DISPATCH_UPCALL_PER_CPU) upcall.portid =
>  			    ovs_dp_get_upcall_portid(dp,
> smp_processor_id()); else
> @@ -651,6 +653,9 @@ static int ovs_packet_cmd_execute(struct sk_buff *skb,
> struct genl_info *info) !!(hash & OVS_PACKET_HASH_L4_BIT));
>  	}
>  
> +	OVS_CB(packet)->upcall_pid =
> +		nla_get_u32_default(a[OVS_PACKET_ATTR_UPCALL_PID], 0);
> +
>  	/* Build an sw_flow for sending this packet. */
>  	flow = ovs_flow_alloc();
>  	err = PTR_ERR(flow);
> @@ -719,6 +724,7 @@ static const struct nla_policy
> packet_policy[OVS_PACKET_ATTR_MAX + 1] = { [OVS_PACKET_ATTR_PROBE] = {
> .type = NLA_FLAG }, [OVS_PACKET_ATTR_MRU] = { .type = NLA_U16 },
>  	[OVS_PACKET_ATTR_HASH] = { .type = NLA_U64 },
> +	[OVS_PACKET_ATTR_UPCALL_PID] = { .type = NLA_U32 },
>  };
>  
>  static const struct genl_small_ops dp_packet_genl_ops[] = {
> diff --git a/net/openvswitch/datapath.h b/net/openvswitch/datapath.h
> index cfeb817a1889..db0c3e69d66c 100644
> --- a/net/openvswitch/datapath.h
> +++ b/net/openvswitch/datapath.h
> @@ -121,6 +121,8 @@ struct datapath {
>   * @cutlen: The number of bytes from the packet end to be removed.
>   * @probability: The sampling probability that was applied to this skb; 0
> means
>   * no sampling has occurred; U32_MAX means 100% probability.
> + * @upcall_pid: Netlink socket PID to use for sending this packet to
> userspace;
> + * 0 means "not set" and default per-CPU or per-vport dispatch should be
> used. */
>  struct ovs_skb_cb {
>  	struct vport		*input_vport;
> @@ -128,6 +130,7 @@ struct ovs_skb_cb {
>  	u16			acts_origlen;
>  	u32			cutlen;
>  	u32			probability;
> +	u32			upcall_pid;
>  };
>  #define OVS_CB(skb) ((struct ovs_skb_cb *)(skb)->cb)
>  
> diff --git a/net/openvswitch/vport.c b/net/openvswitch/vport.c
> index 8732f6e51ae5..6bbbc16ab778 100644
> --- a/net/openvswitch/vport.c
> +++ b/net/openvswitch/vport.c
> @@ -501,6 +501,7 @@ int ovs_vport_receive(struct vport *vport, struct
> sk_buff *skb, OVS_CB(skb)->mru = 0;
>  	OVS_CB(skb)->cutlen = 0;
>  	OVS_CB(skb)->probability = 0;
> +	OVS_CB(skb)->upcall_pid = 0;
>  	if (unlikely(dev_net(skb->dev) != ovs_dp_get_net(vport->dp))) {
>  		u32 mark;
>  

Powered by blists - more mailing lists