[<prev] [next>] [<thread-prev] [thread-next>] [day] [month] [year] [list]
Message-ID: <20250706115319.4f663960@jic23-huawei>
Date: Sun, 6 Jul 2025 11:53:19 +0100
From: Jonathan Cameron <jic23@...nel.org>
To: Waqar Hameed <waqar.hameed@...s.com>
Cc: David Lechner <dlechner@...libre.com>, Nuno Sá
<nuno.sa@...log.com>, "Andy Shevchenko" <andy@...nel.org>, Rob Herring
<robh@...nel.org>, "Krzysztof Kozlowski" <krzk+dt@...nel.org>, Conor Dooley
<conor+dt@...nel.org>, <kernel@...s.com>, <linux-iio@...r.kernel.org>,
<devicetree@...r.kernel.org>, <linux-kernel@...r.kernel.org>
Subject: Re: [PATCH v3 2/3] dt-bindings: iio: proximity: Add Nicera
D3-323-AA PIR sensor
On Fri, 4 Jul 2025 18:14:38 +0200
Waqar Hameed <waqar.hameed@...s.com> wrote:
> Nicera D3-323-AA is a PIR sensor for human detection. It has two GPIOs
> for detection and data communication.
>
> Signed-off-by: Waqar Hameed <waqar.hameed@...s.com>
> ---
> .../iio/proximity/nicera,d3323aa.yaml | 62 +++++++++++++++++++
> 1 file changed, 62 insertions(+)
> create mode 100644 Documentation/devicetree/bindings/iio/proximity/nicera,d3323aa.yaml
>
> diff --git a/Documentation/devicetree/bindings/iio/proximity/nicera,d3323aa.yaml b/Documentation/devicetree/bindings/iio/proximity/nicera,d3323aa.yaml
> new file mode 100644
> index 000000000000..65d9b44fcd5e
> --- /dev/null
> +++ b/Documentation/devicetree/bindings/iio/proximity/nicera,d3323aa.yaml
> @@ -0,0 +1,62 @@
> +# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
> +%YAML 1.2
> +---
> +$id: http://devicetree.org/schemas/iio/proximity/nicera,d3323aa.yaml#
> +$schema: http://devicetree.org/meta-schemas/core.yaml#
> +
> +title: Nicera D3-323-AA PIR sensor
> +
> +maintainers:
> + - Waqar Hameed <waqar.hameed@...s.com>
> +
> +description: |
> + PIR sensor for human detection.
> + Datasheet: https://www.endrich.com/Datenbl%C3%A4tter/Sensoren/D3-323-AA_e.pdf
> +
> +properties:
> + compatible:
> + const: nicera,d3323aa
> +
> + vdd-supply:
> + description:
> + Supply voltage (1.8 to 5.5 V).
> +
> + vout-clk-gpios:
> + maxItems: 1
> + description:
> + GPIO for clock and detection.
> + After reset, the device signals with two falling edges on this pin that it
> + is ready for configuration (within 1.2 s).
> + During configuration, it is used as clock for data reading and writing (on
> + data-gpios).
> + After all this, when device is in operational mode, it signals on this pin
> + for any detections.
Don't start a new line for a new sentence.
> +
> + data-gpios:
> + maxItems: 1
> + description:
> + GPIO for data reading and writing. This is denoted "DO (SI)" in datasheet.
> + During configuration, this pin is used for writing and reading
> + configuration data (together with vout-clk-gpios as clock).
> + After this, during operational mode, the device will output serial data on
> + this GPIO.
> +
> +required:
> + - compatible
> + - vdd-supply
> + - vout-clk-gpios
> + - data-gpios
> +
> +additionalProperties: false
> +
> +examples:
> + - |
> + #include <dt-bindings/gpio/gpio.h>
> +
> + proximity {
> + compatible = "nicera,d3323aa";
> + vdd-supply = <®ulator_3v3>;
> + vout-clk-gpios = <&gpio 78 GPIO_ACTIVE_HIGH>;
> + data-gpios = <&gpio 76 GPIO_ACTIVE_HIGH>;
> + };
> +...
Powered by blists - more mailing lists