[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID:
<20250711-kernel-upstreaming-add_network_support-v1-0-4a66a17c94b3@blaize.com>
Date: Fri, 11 Jul 2025 13:36:18 +0000
From: Nikolaos Pasaloukos <nikolaos.pasaloukos@...ize.com>
To: James Cowgill <james.cowgill@...ize.com>,
Matt Redfearn
<matthew.redfearn@...ize.com>,
Neil Jones <neil.jones@...ize.com>, Rob
Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor
Dooley <conor+dt@...nel.org>
CC: "devicetree@...r.kernel.org" <devicetree@...r.kernel.org>,
"linux-kernel@...r.kernel.org" <linux-kernel@...r.kernel.org>,
Nikolaos
Pasaloukos <nikolaos.pasaloukos@...ize.com>
Subject: [PATCH 0/2] arm64/blaize: Enable Ethernet to SoC & CB2
BLZP1600 SoC includes a Synopsys gigabit Ethernet controller which
is supported by the upstream "snps,dwmac" driver.
Add a device tree entry to enable the network controller with
its associated interrupts, clocks, resets and configurations.
The Blaize CB2 board contains a TI DP83867 Phy connecting the
Ethernet controller to an RJ45 connector on the board. Add a
device tree entry for this with its associated reset via a
GPIO signal to enable Ethernet connectivity on the board.
Signed-off-by: Nikolaos Pasaloukos <nikolaos.pasaloukos@...ize.com>
---
Nikolaos Pasaloukos (2):
arm64/dts/blaize: Enable Ethernet support for BLZP1600
arm64/dts/blaize: Enable Ethernet on CB2 board
arch/arm64/boot/dts/blaize/blaize-blzp1600-cb2.dts | 22 ++++++++++++++++++++++
arch/arm64/boot/dts/blaize/blaize-blzp1600.dtsi | 22 ++++++++++++++++++++++
2 files changed, 44 insertions(+)
---
base-commit: d96b887ccb6676f366968ab6c7dcd328e264d33c
change-id: 20250530-kernel-upstreaming-add_network_support-979124800265
Best regards,
--
Nikolaos Pasaloukos <nikolaos.pasaloukos@...ize.com>
Powered by blists - more mailing lists