| lists.openwall.net | lists / announce owl-users owl-dev john-users john-dev passwdqc-users yescrypt popa3d-users / oss-security kernel-hardening musl sabotage tlsify passwords / crypt-dev xvendor / Bugtraq Full-Disclosure linux-kernel linux-netdev linux-ext4 linux-hardening linux-cve-announce PHC | |
|
Open Source and information security mailing list archives
| ||
|
Message-ID: <20250715034320.2553837-4-jacky_chou@aspeedtech.com>
Date: Tue, 15 Jul 2025 11:43:13 +0800
From: Jacky Chou <jacky_chou@...eedtech.com>
To: <bhelgaas@...gle.com>, <lpieralisi@...nel.org>, <kwilczynski@...nel.org>,
<mani@...nel.org>, <robh@...nel.org>, <krzk+dt@...nel.org>,
<conor+dt@...nel.org>, <joel@....id.au>, <andrew@...econstruct.com.au>,
<linux-aspeed@...ts.ozlabs.org>, <linux-pci@...r.kernel.org>,
<devicetree@...r.kernel.org>, <linux-arm-kernel@...ts.infradead.org>,
<linux-kernel@...r.kernel.org>
CC: <openbmc@...ts.ozlabs.org>, <linux-gpio@...r.kernel.org>,
<linus.walleij@...aro.org>, <p.zabel@...gutronix.de>, <BMC-SW@...eedtech.com>
Subject: [PATCH v2 03/10] dt-bindings: PCI: Add ASPEED PCIe RC support
This binding describes the required and optional properties for
configuring the PCIe RC node, including support for syscon phandles,
MSI, clocks, resets, and interrupt mapping. The schema enforces strict
property validation and provides a comprehensive example for reference.
Signed-off-by: Jacky Chou <jacky_chou@...eedtech.com>
---
.../bindings/pci/aspeed,ast2600-pcie.yaml | 198 ++++++++++++++++++
1 file changed, 198 insertions(+)
create mode 100644 Documentation/devicetree/bindings/pci/aspeed,ast2600-pcie.yaml
diff --git a/Documentation/devicetree/bindings/pci/aspeed,ast2600-pcie.yaml b/Documentation/devicetree/bindings/pci/aspeed,ast2600-pcie.yaml
new file mode 100644
index 000000000000..6fb6cf59c230
--- /dev/null
+++ b/Documentation/devicetree/bindings/pci/aspeed,ast2600-pcie.yaml
@@ -0,0 +1,198 @@
+# SPDX-License-Identifier: (GPL-2.0-only OR BSD-2-Clause)
+%YAML 1.2
+---
+$id: http://devicetree.org/schemas/pci/aspeed,ast2600-pcie.yaml#
+$schema: http://devicetree.org/meta-schemas/core.yaml#
+
+title: ASPEED PCIe Root Complex Controller
+
+maintainers:
+ - Jacky Chou <jacky_chou@...eedtech.com>
+
+description:
+ The ASPEED PCIe Root Complex controller provides PCI Express Root Complex
+ functionality for ASPEED SoCs, such as the AST2600 and AST2700.
+ This controller enables connectivity to PCIe endpoint devices, supporting
+ memory and I/O windows, MSI and legacy interrupts, and integration with
+ the SoC's clock, reset, and pinctrl subsystems.
+
+properties:
+ compatible:
+ enum:
+ - aspeed,ast2600-pcie
+ - aspeed,ast2700-pcie
+
+ reg:
+ maxItems: 1
+
+ ranges:
+ minItems: 2
+ maxItems: 2
+
+ interrupts:
+ maxItems: 1
+ description: IntX and MSI interrupt
+
+ resets:
+ items:
+ - description: PCIe controller reset
+
+ reset-names:
+ items:
+ - const: h2x
+
+ msi-parent: true
+
+ aspeed,ahbc:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description:
+ Phandle to the ASPEED AHB Controller (AHBC) syscon node.
+ This reference is used by the PCIe controller to access
+ system-level configuration registers related to the AHB bus.
+ To enable AHB access for the PCIe controller.
+
+ aspeed,pciecfg:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description:
+ Phandle to the ASPEED PCIe configuration syscon node.
+ This reference allows the PCIe controller to access
+ SoC-specific PCIe configuration registers. There are the others
+ functions such PCIe RC and PCIe EP will use this common register
+ to configure the SoC interfaces.
+
+ aspeed,pciephy:
+ $ref: /schemas/types.yaml#/definitions/phandle
+ description:
+ Phandle to the ASPEED PCIe PHY syscon node.
+ This property provides access to the PCIe PHY control
+ registers required for link initialization and management.
+ The other functions such PCIe RC and PCIe EP will use this
+ common register to configure the PHY interfaces and get some
+ information from the PHY.
+
+ interrupt-controller:
+ description: Interrupt controller node for handling legacy PCI interrupts.
+ type: object
+ properties:
+ '#address-cells':
+ const: 0
+ '#interrupt-cells':
+ const: 1
+ interrupt-controller: true
+
+ required:
+ - '#address-cells'
+ - '#interrupt-cells'
+ - interrupt-controller
+
+ additionalProperties: false
+
+allOf:
+ - $ref: /schemas/pci/pci-bus-common.yaml#
+ - $ref: /schemas/pci/pci-host-bridge.yaml#
+ - $ref: /schemas/interrupt-controller/msi-controller.yaml#
+ - if:
+ properties:
+ compatible:
+ contains:
+ const: aspeed,ast2600-pcie
+ then:
+ required:
+ - aspeed,ahbc
+ else:
+ properties:
+ aspeed,ahbc: false
+
+required:
+ - reg
+ - interrupts
+ - bus-range
+ - ranges
+ - resets
+ - reset-names
+ - msi-parent
+ - msi-controller
+ - aspeed,pciecfg
+ - interrupt-map-mask
+ - interrupt-map
+ - interrupt-controller
+
+unevaluatedProperties: false
+
+patternProperties:
+ "^pcie@[0-9a-f,]+$":
+ type: object
+ properties:
+ resets:
+ items:
+ - description: PCIe PERST
+ reset-names:
+ items:
+ - const: perst
+ clocks:
+ maxItems: 1
+ description: PCIe BUS clock
+ required:
+ - resets
+ - reset-names
+ - clocks
+ - aspeed,pciephy
+
+examples:
+ - |
+ #include <dt-bindings/interrupt-controller/arm-gic.h>
+ #include <dt-bindings/clock/ast2600-clock.h>
+
+ apb {
+ #address-cells = <1>;
+ #size-cells = <1>;
+
+ pcie0: pcie@...700c0 {
+ compatible = "aspeed,ast2600-pcie";
+ device_type = "pci";
+ reg = <0x1e7700c0 0x40>;
+ linux,pci-domain = <0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ interrupts = <GIC_SPI 168 IRQ_TYPE_LEVEL_HIGH>;
+ bus-range = <0x80 0xff>;
+
+ ranges = <0x01000000 0x0 0x00018000 0x00018000 0x0 0x00008000
+ 0x02000000 0x0 0x70000000 0x70000000 0x0 0x10000000>;
+
+ resets = <&syscon ASPEED_RESET_H2X>;
+ reset-names = "h2x";
+
+ #interrupt-cells = <1>;
+ msi-parent = <&pcie0>;
+ msi-controller;
+
+ aspeed,ahbc = <&ahbc>;
+ aspeed,pciecfg = <&pcie_cfg>;
+
+ interrupt-map-mask = <0 0 0 7>;
+ interrupt-map = <0 0 0 1 &pcie_intc0 0>,
+ <0 0 0 2 &pcie_intc0 1>,
+ <0 0 0 3 &pcie_intc0 2>,
+ <0 0 0 4 &pcie_intc0 3>;
+ pcie_intc0: interrupt-controller {
+ interrupt-controller;
+ #address-cells = <0>;
+ #interrupt-cells = <1>;
+ };
+
+ pcie@8,0 {
+ reg = <0x804000 0 0 0 0>;
+ #address-cells = <3>;
+ #size-cells = <2>;
+ device_type = "pci";
+ resets = <&syscon ASPEED_RESET_PCIE_RC_O>;
+ reset-names = "perst";
+ clocks = <&syscon ASPEED_CLK_GATE_BCLK>;
+ pinctrl-names = "default";
+ pinctrl-0 = <&pinctrl_pcierc1_default>;
+ aspeed,pciephy = <&pcie_phy1>;
+ ranges;
+ };
+ };
+ };
--
2.43.0
Powered by blists - more mailing lists