Message-ID: <20250723080322.3047826-3-danishanwar@ti.com>
Date: Wed, 23 Jul 2025 13:33:19 +0530
From: MD Danish Anwar <danishanwar@...com>
To: "David S. Miller" <davem@...emloft.net>,
        Eric Dumazet
	<edumazet@...gle.com>, Jakub Kicinski <kuba@...nel.org>,
        Paolo Abeni
	<pabeni@...hat.com>, Simon Horman <horms@...nel.org>,
        Jonathan Corbet
	<corbet@....net>, Andrew Lunn <andrew+netdev@...n.ch>,
        Mengyuan Lou
	<mengyuanlou@...-swift.com>,
        MD Danish Anwar <danishanwar@...com>,
        Michael
 Ellerman <mpe@...erman.id.au>,
        Madhavan Srinivasan <maddy@...ux.ibm.com>,
        Fan
 Gong <gongfan1@...wei.com>, Lee Trager <lee@...ger.us>,
        Lorenzo Bianconi
	<lorenzo@...nel.org>,
        Geert Uytterhoeven <geert+renesas@...der.be>,
        Lukas
 Bulwahn <lukas.bulwahn@...hat.com>,
        Parthiban Veerasooran
	<Parthiban.Veerasooran@...rochip.com>
CC: <netdev@...r.kernel.org>, <linux-doc@...r.kernel.org>,
        <linux-kernel@...r.kernel.org>
Subject: [PATCH net-next 2/5] net: rpmsg-eth: Add basic rpmsg skeleton

This patch introduces a basic RPMSG Ethernet driver skeleton. It adds
support for creating virtual Ethernet devices over RPMSG channels,
allowing user-space programs to send and receive messages using a
standard Ethernet protocol. The driver includes message handling,
probe, and remove functions, along with necessary data structures.

Signed-off-by: MD Danish Anwar <danishanwar@...com>
---
 drivers/net/ethernet/Kconfig     |  10 +++
 drivers/net/ethernet/Makefile    |   1 +
 drivers/net/ethernet/rpmsg_eth.c | 128 +++++++++++++++++++++++++++++++
 drivers/net/ethernet/rpmsg_eth.h |  75 ++++++++++++++++++
 4 files changed, 214 insertions(+)
 create mode 100644 drivers/net/ethernet/rpmsg_eth.c
 create mode 100644 drivers/net/ethernet/rpmsg_eth.h

diff --git a/drivers/net/ethernet/Kconfig b/drivers/net/ethernet/Kconfig
index f86d4557d8d7..a73a45a9ef3d 100644
--- a/drivers/net/ethernet/Kconfig
+++ b/drivers/net/ethernet/Kconfig
@@ -170,6 +170,16 @@ config OA_TC6
 	  To know the implementation details, refer documentation in
 	  <file:Documentation/networking/oa-tc6-framework.rst>.
 
+config RPMSG_ETH
+	tristate "RPMsg Based Virtual Ethernet driver"
+	depends on RPMSG
+	help
+	  This makes it possible for user-space programs to send and receive
+	  rpmsg messages as a standard eth protocol.
+
+	  To compile this driver as a module, choose M here: the module will be
+	  called rpmsg_eth.
+
 source "drivers/net/ethernet/packetengines/Kconfig"
 source "drivers/net/ethernet/pasemi/Kconfig"
 source "drivers/net/ethernet/pensando/Kconfig"
diff --git a/drivers/net/ethernet/Makefile b/drivers/net/ethernet/Makefile
index 67182339469a..aebd15993e3c 100644
--- a/drivers/net/ethernet/Makefile
+++ b/drivers/net/ethernet/Makefile
@@ -107,3 +107,4 @@ obj-$(CONFIG_NET_VENDOR_XIRCOM) += xircom/
 obj-$(CONFIG_NET_VENDOR_SYNOPSYS) += synopsys/
 obj-$(CONFIG_NET_VENDOR_PENSANDO) += pensando/
 obj-$(CONFIG_OA_TC6) += oa_tc6.o
+obj-$(CONFIG_RPMSG_ETH) += rpmsg_eth.o
diff --git a/drivers/net/ethernet/rpmsg_eth.c b/drivers/net/ethernet/rpmsg_eth.c
new file mode 100644
index 000000000000..9a51619f9313
--- /dev/null
+++ b/drivers/net/ethernet/rpmsg_eth.c
@@ -0,0 +1,128 @@
+// SPDX-License-Identifier: GPL-2.0
+/* RPMsg Based Virtual Ethernet Driver
+ *
+ * Copyright (C) 2024 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+#include <linux/of.h>
+#include "rpmsg_eth.h"
+
+static int rpmsg_eth_rpmsg_cb(struct rpmsg_device *rpdev, void *data, int len,
+			      void *priv, u32 src)
+{
+	struct rpmsg_eth_common *common = dev_get_drvdata(&rpdev->dev);
+	struct message *msg = (struct message *)data;
+	u32 msg_type = msg->msg_hdr.msg_type;
+	int ret = 0;
+
+	switch (msg_type) {
+	case RPMSG_ETH_REQUEST_MSG:
+	case RPMSG_ETH_RESPONSE_MSG:
+	case RPMSG_ETH_NOTIFY_MSG:
+		dev_dbg(common->dev, "Msg type = %d, Src Id = %d\n",
+			msg_type, msg->msg_hdr.src_id);
+		break;
+	default:
+		dev_err(common->dev, "Invalid msg type\n");
+		ret = -EINVAL;
+		break;
+	}
+	return ret;
+}
+
+/**
+ * rpmsg_eth_get_shm_info - Get shared memory info from device tree
+ * @common: Pointer to rpmsg_eth_common structure
+ *
+ * Return: 0 on success, negative error code on failure
+ */
+static int rpmsg_eth_get_shm_info(struct rpmsg_eth_common *common)
+{
+	struct device_node *peer;
+	const __be32 *reg;
+	u64 start_address;
+	int prop_size;
+	int reg_len;
+	u64 size;
+
+	peer = of_find_node_by_name(NULL, "virtual-eth-shm");
+	if (!peer) {
+		dev_err(common->dev, "Couldn't get shared mem node");
+		return -ENODEV;
+	}
+
+	reg = of_get_property(peer, "reg", &prop_size);
+	if (!reg) {
+		dev_err(common->dev, "Couldn't get reg property");
+		return -ENODEV;
+	}
+
+	reg_len = prop_size / sizeof(u32);
+
+	if (reg_len == 2) {
+		/* 32-bit address space */
+		start_address = be32_to_cpu(reg[0]);
+		size = be32_to_cpu(reg[1]);
+	} else if (reg_len == 4) {
+		/* 64-bit address space */
+		start_address = ((u64)be32_to_cpu(reg[0]) << 32) |
+				 be32_to_cpu(reg[1]);
+		size = ((u64)be32_to_cpu(reg[2]) << 32) |
+			be32_to_cpu(reg[3]);
+	} else {
+		dev_err(common->dev, "Invalid reg_len: %d\n", reg_len);
+		return -EINVAL;
+	}
+
+	common->port->buf_start_addr = start_address;
+	common->port->buf_size = size;
+
+	return 0;
+}
+
+static int rpmsg_eth_probe(struct rpmsg_device *rpdev)
+{
+	struct device *dev = &rpdev->dev;
+	struct rpmsg_eth_common *common;
+	int ret = 0;
+
+	common = devm_kzalloc(&rpdev->dev, sizeof(*common), GFP_KERNEL);
+	if (!common)
+		return -ENOMEM;
+
+	dev_set_drvdata(dev, common);
+
+	common->port = devm_kzalloc(dev, sizeof(*common->port), GFP_KERNEL);
+	common->dev = dev;
+	common->rpdev = rpdev;
+
+	ret = rpmsg_eth_get_shm_info(common);
+	if (ret)
+		return ret;
+
+	return 0;
+}
+
+static void rpmsg_eth_rpmsg_remove(struct rpmsg_device *rpdev)
+{
+	dev_dbg(&rpdev->dev, "rpmsg-eth client driver is removed\n");
+}
+
+static struct rpmsg_device_id rpmsg_eth_rpmsg_id_table[] = {
+	{ .name = "shm-eth" },
+	{},
+};
+MODULE_DEVICE_TABLE(rpmsg, rpmsg_eth_rpmsg_id_table);
+
+static struct rpmsg_driver rpmsg_eth_rpmsg_client = {
+	.drv.name = KBUILD_MODNAME,
+	.id_table = rpmsg_eth_rpmsg_id_table,
+	.probe = rpmsg_eth_probe,
+	.callback = rpmsg_eth_rpmsg_cb,
+	.remove = rpmsg_eth_rpmsg_remove,
+};
+module_rpmsg_driver(rpmsg_eth_rpmsg_client);
+
+MODULE_LICENSE("GPL");
+MODULE_AUTHOR("MD Danish Anwar <danishanwar@...com>");
+MODULE_DESCRIPTION("RPMsg Based Virtual Ethernet driver");
diff --git a/drivers/net/ethernet/rpmsg_eth.h b/drivers/net/ethernet/rpmsg_eth.h
new file mode 100644
index 000000000000..56dabd139643
--- /dev/null
+++ b/drivers/net/ethernet/rpmsg_eth.h
@@ -0,0 +1,75 @@
+/* SPDX-License-Identifier: GPL-2.0
+ * Texas Instruments K3 Inter Core Virtual Ethernet Driver common header
+ *
+ * Copyright (C) 2024 Texas Instruments Incorporated - https://www.ti.com/
+ */
+
+#ifndef __RPMSG_ETH_H__
+#define __RPMSG_ETH_H__
+
+#include <linux/errno.h>
+#include <linux/etherdevice.h>
+#include <linux/if_ether.h>
+#include <linux/if_vlan.h>
+#include <linux/jiffies.h>
+#include <linux/kernel.h>
+#include <linux/module.h>
+#include <linux/netdevice.h>
+#include <linux/rpmsg.h>
+
+#define RPMSG_ETH_SHM_MAGIC_NUM 0xABCDABCD
+
+enum rpmsg_eth_msg_type {
+	RPMSG_ETH_REQUEST_MSG = 0,
+	RPMSG_ETH_RESPONSE_MSG,
+	RPMSG_ETH_NOTIFY_MSG,
+};
+
+/**
+ * struct message_header - message header structure for RPMSG Ethernet
+ * @src_id: Source endpoint ID
+ * @msg_type: Message type
+ */
+struct message_header {
+	u32 src_id;
+	u32 msg_type;
+} __packed;
+
+/**
+ * struct message - RPMSG Ethernet message structure
+ *
+ * @msg_hdr: Message header contains source and destination endpoint and
+ *          the type of message
+ *
+ * This structure is used to send and receive messages between the RPMSG
+ * Ethernet ports.
+ */
+struct message {
+	struct message_header msg_hdr;
+} __packed;
+
+/**
+ * struct rpmsg_eth_common - common structure for RPMSG Ethernet
+ * @rpdev: RPMSG device
+ * @port: Ethernet port
+ * @dev: Device
+ */
+struct rpmsg_eth_common {
+	struct rpmsg_device *rpdev;
+	struct rpmsg_eth_port *port;
+	struct device *dev;
+};
+
+/**
+ * struct rpmsg_eth_port - Ethernet port structure for RPMSG Ethernet
+ * @common: Pointer to the common RPMSG Ethernet structure
+ * @buf_start_addr: Start address of the shared memory buffer for this port
+ * @buf_size: Size (in bytes) of the shared memory buffer for this port
+ */
+struct rpmsg_eth_port {
+	struct rpmsg_eth_common *common;
+	u32 buf_start_addr;
+	u32 buf_size;
+};
+
+#endif /* __RPMSG_ETH_H__ */
-- 
2.34.1

Powered by blists - more mailing lists