[<prev] [next>] [thread-next>] [day] [month] [year] [list]
Message-ID: <20250723085654.2273324-1-jonas@kwiboo.se>
Date: Wed, 23 Jul 2025 08:56:42 +0000
From: Jonas Karlman <jonas@...boo.se>
To: Heiko Stuebner <heiko@...ech.de>,
Rob Herring <robh@...nel.org>,
Krzysztof Kozlowski <krzk+dt@...nel.org>,
Conor Dooley <conor+dt@...nel.org>
Cc: Yao Zi <ziyao@...root.org>,
Chukun Pan <amadeus@....edu.cn>,
devicetree@...r.kernel.org,
linux-rockchip@...ts.infradead.org,
linux-arm-kernel@...ts.infradead.org,
linux-kernel@...r.kernel.org,
Jonas Karlman <jonas@...boo.se>
Subject: [PATCH v2 0/5] rockchip: Add power controller support for RK3528
The Rockchip RK3528 support multiple power domains, one PD_GPU that can
fully be powered down, and other that can be idle requested.
Vendor kernel flag all power domains on RK3528 as always-on, this takes
a different route and instead tries to describe all devices power-domain
in the device tree, even for controllers with unsupported runtime status.
The PD_RKVDEC is used by RKVDEC and DDRPHY CRU, and is kept disabled to
prevent a full system reset when trying to read current rate of the
SCMI_CLK_DDR clock.
pm_genpd_summary on a Radxa E20C after this:
domain status children performance
/device runtime status managed by
------------------------------------------------------------------------------
vpu on 0
ffaf0000.gpio unsupported 0 SW
ffb10000.gpio unsupported 0 SW
ffbe0000.ethernet active 0 SW
ffae0000.adc unsupported 0 SW
ffbf0000.mmc suspended 0 SW
vo on 0
ffb00000.gpio unsupported 0 SW
ffc30000.mmc suspended 0 SW
venc on 0
ffb20000.gpio unsupported 0 SW
ffa58000.i2c unsupported 0 SW
gpu off-0 0
ff700000.gpu suspended 0 SW
Changes in v2:
- Drop already applied patches
- Add snps-dw-apb-uart dt-bindings patch
- Update commit messages
This series depend on the patch "arm64: dts: rockchip: convert rk3528
power-domains to dt-binding constants" [1] for a clean apply.
[1] https://lore.kernel.org/r/20250620201715.1572609-1-heiko@sntech.de
Jonas Karlman (5):
dt-bindings: gpio: rockchip: Allow use of a power-domain
dt-bindings: i2c: i2c-rk3x: Allow use of a power-domain
dt-bindings: iio: adc: rockchip-saradc: Allow use of a power-domain
dt-bindings: serial: snps-dw-apb-uart: Allow use of a power-domain
arm64: dts: rockchip: Enable more power domains for RK3528
.../bindings/gpio/rockchip,gpio-bank.yaml | 3 ++
.../devicetree/bindings/i2c/i2c-rk3x.yaml | 3 ++
.../bindings/iio/adc/rockchip-saradc.yaml | 3 ++
.../bindings/serial/snps-dw-apb-uart.yaml | 3 ++
arch/arm64/boot/dts/rockchip/rk3528.dtsi | 30 +++++++++++++++++--
5 files changed, 39 insertions(+), 3 deletions(-)
--
2.50.1
Powered by blists - more mailing lists